Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Infinex aluminum flush extrusion is a Rev-A-Shelf LED lighting accessory designed for building a custom light fixture to the length you need. This Tresco aluminum extrusion is made of aluminum, finished in satin clear, and supplied with a milk diffuser lens for a clean recessed look. The product is 72 inches long and is part of the Infinex system, which is described as a cut-to-length custom LED fixture extrusion. Product data also states that Infinex works with all Tresco 12V DC power supplies, so buyers planning a low-voltage lighting layout can review that compatibility before ordering. For installers, the main value is simple: choose the extrusion style, cut it to the desired length, and assemble a fixture that fits the project instead of working around a fixed-size light.
Key specs to confirm: This Rev-A-Shelf Infinex aluminum flush extrusion is a 72 inch aluminum channel with a satin clear finish and a milk diffuser lens. Before purchase, confirm the cut length needed for your installation, the recess dimensions required for a flush fit, and the LED components intended for use with the extrusion. Product data states that Infinex works with all Tresco 12V DC power supplies, so power planning should be checked against your full lighting layout. If you need exact channel dimensions, diffuser dimensions, mounting details, or any electrical limitations beyond the stated compatibility, those details should be confirmed with the manufacturer or technical documentation before ordering.
What's included: Verified included items are the aluminum extrusion and the milk diffuser lens. Packaging is listed as sold each.
What to verify before ordering: Confirm the finished fixture length, recess size, intended installation surface, compatible Tresco lighting components, and power supply plan. Verify whether additional assembly parts, connectors, or mounting accessories are required for your specific build.
Installers and serious DIY buyers usually look at a recessed flush aluminum extrusion when fixed fixture lengths do not match the cabinet, display, or work area. That is the core use case for this product. The Infinex aluminum flush extrusion by Rev-A-Shelf, from Tresco Lighting, is intended to let you choose the style, cut the extrusion to the desired length, and assemble a custom fixture. That matters when a standard light bar leaves gaps, overlaps a partition, or does not align with the opening you need to light.
A 72 inch LED extrusion gives you a longer piece to work from, which is useful when one run needs to be trimmed for a precise fit. The aluminum body provides the channel structure, while the included milk diffuser lens gives the assembly a finished cover component. Buyers planning a satin clear aluminum extrusion for a flush installation often want a built-in appearance rather than a surface-mounted look, and this product is described specifically as a flush extrusion style.
Another practical scenario is matching a low-voltage lighting layout to existing Tresco components. Product data states that Infinex works with all Tresco 12V DC power supplies. That gives buyers one verified compatibility point when they are planning a custom LED fixture extrusion around a known power platform. If your project uses other lighting components, exact strip, panel, connector, or mounting fit should still be checked before ordering because those details are not fully listed in the verified data here.
This product can also help when the job requires a cleaner visual line. A milk diffuser LED extrusion can soften the appearance of the light source and complete the channel assembly. If exact diffuser output, beam effect, or channel depth is important to your design, confirm those specifications in current technical documents before finalizing the order.
When buyers compare LED lighting accessories in this category, the main differences usually come down to installation style, finish, included parts, and how much flexibility the system gives during layout. This Rev-A-Shelf product is clearly positioned as an aluminum flush extrusion with a milk diffuser lens and a satin clear finish. It is also described as part of a system built around custom lengths rather than fixed fixture sizes.
That distinction can be useful if your priority is fit. A standard fixture may be faster to specify when dimensions line up exactly, but a cut-to-length extrusion is often the better match when the opening, cabinet run, or display section is not a standard size. The Infinex system approach supports that type of planning because the buyer starts with the extrusion style and then cuts to the desired length.
Another point buyers often compare is included content. Here, the verified package information confirms an aluminum extrusion with a milk diffuser lens, sold each. That gives a clear baseline for estimating what else may still be needed. If your installation requires end caps, clips, connectors, or lighting modules, those should be confirmed separately rather than assumed.
Compatibility is another deciding factor. The verified product description states that Infinex works with all Tresco 12V DC power supplies. For buyers already using Tresco components, that can simplify planning. For buyers mixing systems, it is wise to confirm every connection point and electrical detail with the manufacturer documentation. Follow local electrical codes and permitting requirements in your area.
The Rev-A-Shelf product is an Infinex aluminum flush extrusion with a milk diffuser lens, supplied in a 72 inch length with a satin clear finish.
This product is described as an aluminum flush extrusion, which indicates a recessed flush style for built-in lighting applications.
The Infinex aluminum flush extrusion is 72 inches long before any field cutting for a custom fixture build.
The product includes a milk diffuser lens with the aluminum extrusion.
The Infinex system is described as a cut-to-desired-length custom fixture system, so buyers can plan around the needed finished length.
Infinex is stated to work with all Tresco 12V DC power supplies.
The buyer should measure the finished fixture length, recess dimensions, and the installation surface before ordering this recessed flush aluminum extrusion.
The verified data lists the aluminum extrusion and milk diffuser lens, so any additional assembly parts should be confirmed before purchase.
The product finish is listed as satin clear, and the web description also refers to a satin aluminum finish.
This lighting product should be installed using manufacturer guidance, and low-voltage power connections should follow local electrical codes and permitting requirements in your area.
Rev-A-Shelf LED lighting accessories like this Infinex aluminum flush extrusion are a practical choice when you need a custom-length recessed fixture build. The verified package includes the 72 inch aluminum extrusion and milk diffuser lens, sold each, with compatibility stated for Tresco 12V DC power supplies. Before you place the order, confirm your cut length, recess dimensions, finish preference, and whether any extra connectors or mounting parts are needed for the full installation. That check helps match the extrusion to the project the first time.
Buyers comparing a custom LED fixture extrusion should focus on fit, included parts, finish, and power supply compatibility. For this Rev-A-Shelf Infinex model, the verified facts are clear: aluminum construction, satin clear finish, 72 inch length, and a milk diffuser lens included. If your project depends on exact channel dimensions or additional accessories, confirm those details before ordering.
Sold In: 1 Each