Rev-A-Shelf 53PSPE Two-Tier Blind Corner Kit for 15" Opening and Soft-close Full extension Slides Orion Gray, Non-handed - 53PSPE-15SC-FOG

Choose a blind corner organizer

blind corner organizer buyers looking to recover hard-to-reach cabinet space can use this Rev-A-Shelf blind corner kit in blind cabinets with a minimum 15 inch opening width. This product is a two-tier blind corner kit with a metal frame, four solid bottom shelves, and Orion Gray flat wire. The Rev-A-Shelf blind corner pull-out uses soft-close full extension slides to bring stored items forward with smoother access. Its universal mounting and non-handed blind corner organizer design help simplify planning because the kit mounts to the cabinet floor and is not limited to one handing direction. For installers and serious DIY cabinet projects, this blind cabinet organizer is built for practical access in kitchen and bath cabinetry where blind corners often waste usable storage.

See how this blind corner pull-out helps

• Designed for a minimum 15 inch opening width - helps buyers match this blind corner organizer to the cabinet opening size called out in the product data.
• Two-tier metal frame - gives the blind corner pull-out a structured layout for storing items on two levels instead of leaving the corner unused.
• Four solid bottom shelves - provides contained shelf surfaces that can help keep smaller items from shifting through open wire bottoms.
• Orion Gray flat wire - gives the Rev-A-Shelf blind corner kit a finished look that coordinates with the listed Orion Gray design.
• Full-extension, ball-bearing slides with soft-close - helps the shelves travel outward for access while reducing abrupt closing movement.
• Universal mounting - gives installers more flexibility when planning cabinet placement and installation approach.
• Non-handed configuration - allows the blind cabinet organizer to be used without choosing a left-hand or right-hand specific version.
• Mounts to cabinet floor - identifies the main installation point so buyers can confirm the cabinet base is ready for this product type.
• 27 lb. per front shelf capacity - helps buyers plan front-shelf storage loads using the verified weight rating.
• 34 lb. per back shelf capacity - helps buyers understand the verified load capacity for the rear shelves in this two-tier blind corner kit.

Confirm blind cabinet organizer fit details

Key specs to confirm: This Rev-A-Shelf blind cabinet organizer is designed for blind cabinet applications with a minimum 15 inch opening width. Buyers should confirm the cabinet is a blind corner layout, verify that floor mounting is appropriate, and check that the cabinet interior can accept a two-tier blind corner kit with full-extension slide travel. The verified shelf load limits are 27 lb. per front shelf and 34 lb. per back shelf. If you need exact overall dimensions, door clearance, or installation tolerances, those details should be confirmed with the manufacturer or technical documentation before ordering. Any additional compliance or performance details not listed in the product data should also be verified there.

What's included: Verified product details indicate a two-tier metal frame, four solid bottom shelves, Orion Gray flat wire, and soft-close full-extension ball-bearing slides. The product is sold per each.

What to verify before ordering: Confirm blind corner cabinet type, minimum 15 inch opening width, cabinet floor condition for mounting, available interior clearance for shelf movement, and whether your stored items fit within the listed front and back shelf capacities.

Compare this Rev-A-Shelf blind corner kit

Use a blind cabinet organizer daily

A blind corner cabinet often becomes one of the least usable spaces in a kitchen or bath. Items get pushed deep into the back, and access usually means reaching around a fixed shelf or unloading the front just to find what you need. A two-tier blind corner kit addresses that common problem by moving stored contents out of the corner and into reach.

This Rev-A-Shelf blind corner kit is intended for cabinets with a minimum 15 inch opening width, so it fits projects where the opening is limited but the corner still needs organized access. For remodel work, that can be useful when a cabinet run already exists and the installer needs a blind corner pull-out that mounts to the cabinet floor. For new cabinet builds, the non-handed blind corner organizer design can reduce planning friction because the product is described as universal mounting and non-handed rather than tied to one handing direction.

In daily use, the two-tier layout helps separate categories of stored items. A buyer may use front shelves for frequently reached kitchen goods and reserve the back shelves for less-used supplies, while staying within the verified 27 lb. per front shelf and 34 lb. per back shelf capacities. The four solid bottom shelves can also matter when you want more contained support under stored items instead of an open shelf base. Because the product uses soft-close full extension slides, buyers looking for smoother travel and more complete access can focus on those verified features rather than guessing from appearance alone.

If your project involves a 15 inch opening blind corner, this product type can be a practical fit, but you should still confirm exact cabinet interior dimensions, door clearance, and slide path before ordering. Those details are important on any blind cabinet organizer because cabinet construction, hinges, and adjacent hardware can affect installation and movement.

Compare blind corner pull-out design choices

When comparing a blind corner pull-out, buyers usually look at access style, mounting method, load limits, and whether the organizer is easy to specify for the cabinet on hand. This Rev-A-Shelf blind corner kit gives clear verified points in those areas. It mounts to the cabinet floor, uses full-extension ball-bearing slides with soft-close, and has a non-handed design with universal mounting. Those facts help buyers compare this product type against other blind corner organizers without relying on assumptions.

A two-tier blind corner kit can appeal to buyers who want vertical organization rather than a single shelf level. The listed four solid bottom shelves create multiple storage surfaces, which may help with sorting and containment. The verified front and back shelf capacities also give installers and cabinet owners a concrete planning reference. That is useful when deciding what belongs on the front shelves versus the rear shelves.

Brand matters when buyers want a clearly identified cabinet accessory from a known woodworking and storage hardware manufacturer. Rev-A-Shelf is the listed brand for this blind cabinet organizer, and the product data clearly identifies the finish style as Orion Gray. For trade buyers ordering through Wurth Baer Supply, the product page can be used to confirm the product type, opening requirement, and mounting style before a job is released. If your project depends on exact dimensions beyond the verified opening width, the safest step is to review manufacturer documentation before purchase.

Ask fit questions before ordering

Order the right two-tier blind corner kit

two-tier blind corner kit buyers should focus on fit first. This Rev-A-Shelf blind corner organizer is designed for a blind cabinet with a minimum 15 inch opening width, floor mounting, and soft-close full-extension slides. The verified included components are the metal frame, four solid bottom shelves, and Orion Gray flat wire, sold per each. Before purchase, confirm cabinet type, opening size, interior clearance, and that your stored items stay within the listed front and back shelf capacities so the installation matches the cabinet and the organizer performs as intended.