Top Knobs Lambert pull gives you a 3-3/4 inch (96 mm) center to center bar-style pull that suits cabinet and furniture projects needing a consistent handle layout. The defined center to center dimension lets installers drill repeatable hole patterns across doors and drawers, keeping fronts aligned and visually balanced on runs of cabinetry. As part of the Lambert Series, this pull maintains a unified design language, helping shops and remodelers carry the same look across multiple rooms or casework lines. The polished nickel finish presents a bright metal surface, so fronts read clean and finished when paired with common laminates or wood tones. Under the Top Knobs brand and TK3331PN part number, the pull provides a clear spec reference for ordering, job drawings, and reorders when a project expands or a damaged handle needs a direct replacement.
The 3-3/4 inch (96 mm) center to center measurement defines exactly where mounting holes land, so installers can use standard drilling jigs set to 96 mm spacing for efficient runs of cabinets. This fixed spread keeps handles aligned from door to door, minimizing layout time on repetitive work. As a bar pull, the straight profile makes it easy to visually square the pull to door edges before tightening fasteners, helping avoid slight rotations that show up under long light reflections. In cabinet shops laying out fronts in batches, the consistent center to center value supports template use, reducing measurement variation between workers and maintaining a uniform appearance.
This Top Knobs Lambert Series 3-3/4 inch (96 mm) center to center polished nickel pull fits into decorative hardware and moldings applications, so it suits cabinet doors, drawers, and similar casework needing a defined handle location. The pull falls within the handles and pulls class, making it appropriate when a project spec calls for a bar-style handle rather than a knob. In residential or commercial woodworking, the polished nickel finish ties into other bright metal elements, helping designers extend the same material tone across cabinet hardware, trim, and fixtures. Because the pull is identified as part of the Top Knobs Lambert Series, it slots cleanly into projects already using Lambert-branded decorative hardware, supporting unified styling from base cabinets up through wall units.
The 3-3/4 inch (96 mm) center to center measurement on this Lambert Series pull is important because it controls both ergonomics and layout across a run of cabinetry. That fixed dimension defines where hands naturally grip, giving a predictable feel from one cabinet to the next when repeated through a kitchen or office. For installers, the 96 mm spread aligns with a common drilling standard, allowing jigs or CNC programs set to that pattern to place holes with minimal setup changes between fronts. The polished nickel finish further supports consistent results by presenting a uniform reflective surface across all pulls on the job, which reduces visual distractions when doors line up under task lighting. Using the TK3331PN part number on drawings and material lists keeps this specific size and finish locked into the project, so any later additions match the original installation without reworking hole positions.
The Top Knobs Lambert Series TK3331PN pull has a 3-3/4 inch (96 mm) center to center, so installers drill holes at that spacing to align multiple pulls across cabinet fronts.
The TK3331PN is a bar-style pull in the Top Knobs Lambert Series, so it serves as a handle on cabinet doors, drawers, and similar decorative hardware applications.
This Lambert Series pull is polished nickel, providing a bright metallic finish that coordinates with other nickel-finished components in a cabinet or furniture project.
The 96 mm center to center on the TK3331PN matches a common drilling pattern, so installers can use standard jigs or programs, speeding layout and keeping pulls consistently aligned.
The TK3331PN Lambert Series pull is manufactured by Top Knobs, giving shops a clear brand reference when specifying decorative hardware and coordinating with other Top Knobs pieces.
The pull is identified by the manufacturer part number TK3331PN, which simplifies reorders and lets drawings point to this exact 3-3/4 inch polished nickel Lambert Series pull.
The Top Knobs Lambert Series 3-3/4 inch (96 mm) center to center polished nickel pull, TK3331PN, gives you a clearly defined mounting spread and a bar-style profile suited to decorative cabinet work. When a job calls for bright nickel hardware with consistent hole spacing, this Lambert pull provides a specific, repeatable reference that ties directly into drawings, drilling setups, and future replacements on matching casework.
Sold In: 1 Each