Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Brockwell pull is a D-handle bar pull for cabinet doors and drawer fronts that demand hardware scaled to match, mounting on 12 inch (305 mm) centers.
Most cabinet pulls are sized for drawers and doors in the 18 to 24 inch range. A 12 inch center-to-center pull is a different specification: it suits wide pot drawers, double-door pantry fronts, island base doors, and appliance-adjacent tall cabinets where a shorter pull would look undersized against the front it mounts on. The D-handle shape reinforces this scale. Unlike a straight bar that reads as a line across the front, the D-handle returns at both ends, giving the pull a frame rather than a stroke, which reads well on larger cabinetry where the hardware needs to hold its own visually.
The pull is cast in zinc and finished in Flat Black. Flat Black is a non-reflective, even-toned black that does not pick up kitchen light the way a polished or satin finish does. On light-fronted cabinetry it creates a defined graphic contrast. On dark fronts it sits quietly at the surface. The low sheen also means that the marks and handling wear that accumulate on hardware in a working kitchen are less visible than they would be on a high-gloss surface. The 1/2 inch grip width keeps the profile trim relative to the pull's length, so the hardware does not read as heavy even at this scale.
This pull is the right fit for a kitchen, laundry room, or mudroom project where at least some of the cabinetry is wide enough to warrant 12 inch hardware. Designers specifying a full transitional kitchen often run shorter Brockwell pulls on narrower drawers and step up to this length for the wide bank and the tall pantry, keeping all hardware within the same collection for a consistent finish and profile across the room. Cabinet shops running a spec build or a multi-room project will find the Brockwell series covers the spacing range needed to do that without switching lines.
A straight bar runs grip to post in a single plane. A D-handle curves or angles back to the mounting surface at both ends, which gives the pull a closed silhouette and a slightly different grip angle. On a long pull like this one, the return also keeps the ends from looking unfinished.
12 inches is the center-to-center spacing, the distance between the centers of the two mounting holes. The overall length is 12-5/16 inches, which is slightly larger. Drill or match your holes at 12 inches.
Yes. A 12 inch pull is a common choice for tall and wide fronts where a shorter pull would look undersized. The D-handle profile suits both door and drawer applications at this scale.
That is the intended use. The Brockwell collection spans multiple center-to-center sizes in the same profile and finish, so narrower drawers and doors can carry a shorter pull while wide fronts use this one.
Choose this pull when the cabinetry is large enough that the hardware needs to hold its proportions, and the finish needs to be a flat, non-reflective black that works across light and dark fronts alike.
Sold In: 1 Each