Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Cressing cup pull is a shell-form drawer pull sized to a 6-5/16 inch (160 mm) center-to-center spacing, a scale that suits wide base drawers, file drawers, and furniture-style drawer fronts where a standard 96 mm pull would look undersized.
A 6-5/16 inch center-to-center is the right answer when the drawer front is wide enough that a narrower pull would look like it belongs on a different piece of furniture. Wide base drawers, deep file drawers, furniture-style islands, and blanket chest fronts all benefit from hardware scaled to the opening rather than hardware that disappears against it. The cup form reinforces that logic: the shell spans the spacing generously, giving the drawer a presence that a bar pull of the same hole pattern would not.
This spacing also comes up in replacement work. If an existing bank of wide drawers is already drilled at 160 mm, this pull drops onto those holes directly, with no new drilling and no patching.
The pull is cast in zinc and finished in Brushed Satin Nickel. The brushing runs across the surface before the nickel is applied, which breaks up the reflectivity so the finish reads as a warm, even silver rather than a mirror. Against painted fronts it softens the contrast; against wood it coordinates without competing with the grain. Brushed Satin Nickel sits in a middle ground between the warmth of brass and the cool brightness of polished chrome, which is part of why it works across such a range of cabinetry colors and wood tones.
This cup pull suits designers and cabinet shops specifying hardware for wide drawer banks where the hole pattern is already set at 160 mm, or where the drawer width calls for a longer reach. It is an equally practical choice for homeowners replacing an existing set and matching the original drill pattern. The transitional design language keeps it at home in a traditional kitchen or a cleaner contemporary one, and the Cressing series offers companion knobs and pulls so doors and drawers can be coordinated from a single collection.
A cup pull is gripped from underneath, which is a natural motion on a drawer and an awkward one on a door. Most installations place cup pulls on drawers and knobs or bar pulls on doors, often drawn from the same collection to keep the finish consistent.
Measure from the center of one existing mounting hole to the center of the other. If that distance is 6-5/16 inches or 160 mm, this pull fits without any new drilling.
It will coordinate with other pieces in the Cressing collection. Brushed Satin Nickel finishes vary between manufacturers, so a cross-brand match cannot be guaranteed without comparing the pieces directly.
The Cressing series includes knobs and pulls in the same design language and Brushed Satin Nickel finish, so you can mix knobs on doors and cup pulls on drawers without introducing a second collection.
For wide drawers that need hardware scaled to match them, this Cressing cup pull at 6-5/16 inch centers gives the front the presence it calls for, in a finish that works across a wide range of cabinetry.
Sold In: 1 Each