Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Compact washer drip pan describes exactly what this Killarney Metals KM-03383 pan is built to do: sit under a washing machine and collect spills in a defined footprint. The 25 inch width and 27 inch length create a compact catch area that suits tight laundry spaces while still covering the machine base zone. The 2-1/2 inch height gives the pan depth for holding leaked water before it reaches the floor, supporting basic containment during a hose or connection failure. Stainless steel construction provides a rigid, corrosion-resistant body, so the pan keeps its shape and function when exposed to moisture over time. As a drip pan in the Shop and Safety Supplies category, it plays a preventive role in handling incidental leaks rather than constant flow, helping safeguard adjacent surfaces in laundry or utility areas.
The 25 inch by 27 inch overall size gives installers defined outer dimensions to work with when planning floor layouts or surrounding platforms under a washer. The 2-1/2 inch height indicates the minimum clearance needed around the pan edges, which matters when positioning the unit between walls or casework. The SAP description identifies the pan as a washer floor tray with drain, so the design is oriented toward directing collected water toward a drain point instead of leaving it to spread across the floor, supporting safer management of leaks. As part of the Drip Pans product class, it is intended to sit beneath equipment rather than act as a structural support, which informs how it is positioned during washer placement.
The compact washer drip pan dimensions of 25 inches wide and 27 inches long suit smaller laundry or utility areas where floor space is limited but leak control is still required. Those outer dimensions provide a clear planning rectangle when aligning the washer, nearby walls, and any adjacent cabinetry. The 2-1/2 inch height raises the catch edge above the floor surface, which helps contain water long enough for it to reach the tray drain instead of spreading sideways immediately. As a washer floor tray identified by KM-03383, the pan is intended to be placed directly under the washing machine footprint so it can intercept drips from hoses, pumps, or internal overflows that exit near the base of the machine. Being categorized under Shop and Safety Supplies emphasizes that its role is part of an overall strategy for protecting floors and adjacent building materials in areas where washers operate. In commercial or workshop environments, this defined drip area supports routine housekeeping by concentrating leaks in one controlled zone that can be monitored during regular rounds.
The fixed 25 inch width and 27 inch length of this Killarney Metals washer pan give installers a known size to reference across multiple jobs, which helps standardize rough-in floor space for similar machines. Using the same KM-03383 dimensions from project to project simplifies layout planning, because the required footprint for the tray does not change between installations. The 2-1/2 inch height defines how much vertical edge rises above the floor, which guides how high surrounding finishes or thresholds should meet the tray edge for a clean transition that still leaves the containment lip effective. Stainless steel construction contributes to consistent performance because the tray body resists deformation in normal handling, helping it sit flat so water flows predictably toward the drain point referenced in the SAP description. As a drip pan in the Drip Pans product class, it is purpose-built for incidental washer leaks rather than structural loads, so installers can treat it as a containment component in the assembly, positioning the washer to stand over the tray while the tray manages stray water at the base level.
The KM-03383 compact washer drip pan measures 25 inches wide, 27 inches long, and 2-1/2 inches high, so it defines a compact but useful containment footprint under a washing machine.
The 2-1/2 inch height provides depth for holding leaked water, giving the pan capacity to contain spills before they spread across the floor surface around the washer area.
The compact washer drip pan is made from stainless steel, providing a rigid, corrosion-resistant tray body that stands up to wet laundry and utility room conditions over time.
This product is identified as Killarney Metals part number KM-03383, which lets shops and facilities specify the same washer floor tray consistently across multiple locations.
The washer floor tray with drain description indicates the pan is designed to collect and direct leaked water toward a drain point, supporting safer control of washer leaks at floor level.
This pan sits in the Shop and Safety Supplies drip pans category, so it functions as part of a leak-control approach around washing machines in laundry or utility spaces.
The stainless steel KM-03383 compact washer drip pan from Killarney Metals offers a defined 25 inch by 27 inch footprint with 2-1/2 inch height for leak containment under a washing machine. As a washer floor tray with drain in the Drip Pans class, it is intended to manage incidental leaks at floor level as part of Shop and Safety Supplies planning. For projects that call for a compact, stainless solution around laundry equipment, this washer leak containment pan provides clear dimensions and material details to build into your layout. Put this model into your next washer installation plan when you need a dedicated stainless steel drip zone beneath the machine.