Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC threaded hose drain pan fitting gives a solid way to move collected liquids out of a drip or drain pan through a threaded connection that resists movement during use. This fitting is made from PVC, so the body stays lightweight while still providing a defined threaded interface for a drain connection. The fitting is designed with a 1 inch NPT drain hole, which sets a clear, standardized thread size for tying into an NPT drain run. The 1 inch NPT drain hole works as the transition point between the drip pan and a downstream hose or pipe sized for that thread, helping direct flow out of the pan. The fitting is white, which lets it visually blend with many light-colored shop and safety setups while still being easy to see against darker drain pans.
The 1 inch NPT drain hole on this Killarney Metals fitting defines the key interface dimension, so installers can match it to piping or hoses that carry a 1 inch NPT male or female thread arrangement in the drain stack. Because the fitting body is PVC, the threaded area is molded to that standard size, which supports repeatable engagement with NPT-threaded components without needing custom transitions. As a drip pan accessory, this threaded hose drain pan fitting serves as the point where liquid collected in the pan moves into a controlled NPT drain path, simplifying layout when a pan must tie into existing NPT-based systems in a shop or safety environment.
This PVC threaded hose drain pan fitting sits in the drain location of a drip or drain pan, providing a fixed outlet where liquid leaves the pan. Within shop and safety supply setups, the fitting functions as part of drip and drain pan assemblies that capture runoff before sending it onward. The 1 inch NPT drain hole focuses the flow into a defined, threaded exit point, which supports use in locations where a pan must be tied into a more permanent drain or hose line. As a drip pan accessory, the fitting suits situations where controlled drainage away from machinery, benches, or storage areas is important for routine operations.
The 1 inch NPT drain hole on the Killarney Metals KM-00663 fitting matters because it sets a standard connection that aligns with widely used NPT thread patterns in shop and facility plumbing, simplifying drain line planning from the pan. Using PVC for the threaded hose drain pan fitting keeps the part manageable in weight while still offering a molded NPT thread form that engages cleanly with matching components, which helps reduce cross-threading risk during installation. The white PVC finish makes the fitting easier to see when checking pan drain points in low-light shop conditions, which is useful when drip pans sit under equipment or in tight spaces. Its role as a drip pan accessory means this fitting is intended to integrate directly into drip and drain pan systems, supporting cleaner liquid handling and routing around work zones.
The PVC threaded hose drain pan fitting has a 1 inch NPT drain hole, so it connects to components that share the same 1 inch NPT thread standard for a consistent drain interface.
The KM-00663 drain fitting is made from PVC, providing a molded body that keeps the threaded form stable while remaining lightweight for drip and drain pan applications.
The PVC drip pan fitting uses a 1 inch NPT drain hole, allowing it to tie into NPT-threaded hoses or piping so liquid collected in the pan can be routed away.
This Killarney Metals PVC threaded hose drain pan fitting is white, which provides clear visibility against many drip pan surfaces during layout and inspection.
This product is classified as a drip pan accessory within shop and safety supplies, indicating that it is designed to work with drip and drain pan systems.
The manufacturer part number for this PVC threaded hose drain pan fitting is KM-00663, which helps installers match it precisely in ordering and documentation.
PVC threaded hose drain pan fitting with a 1 inch NPT drain hole offers a clear, standardized way to transition from a drip pan outlet into an NPT-based drain route. The PVC body, white color, and Killarney Metals KM-00663 identification give you a defined part to specify when building or maintaining drip and drain pan systems. For projects that call for a drip pan accessory tied into a 1 inch NPT line, this fitting provides the matching thread size and visual clarity needed to keep drainage layouts straightforward.