Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Rev-A-Shelf 4PIL-HDW-L-200 pilaster brackets are steel shelf-support hardware sized for a 3/4-inch pilaster strip and oriented for left-side installation. They are sold in a box of 200 and are the replacement or expansion brackets for the 4PIL pilaster system.
A pilaster system divides the shelf-support work between left and right rails, and each side requires its own bracketing. These left-position brackets drop into the slots of the left pilaster strip and carry the front-left and rear-left corners of each adjustable shelf. Installing the correct side is what keeps every shelf level across the full width of the cabinet. If a cabinet run has ten pilaster-equipped cabinets, all ten left rails need these brackets.
Pilaster brackets take more wear than most shelf hardware because they get moved whenever the shelf layout changes. The steel construction on these brackets maintains the tab geometry through repeated repositioning so the bracket keeps its grip in the pilaster slot. The 3/4-inch width is the standard pilaster dimension in the 4PIL system, and the bracket profile is engineered to that slot so there is no slop or rattle when the shelf is loaded.
Cabinet shops building pilaster-equipped pantry or base cabinets in volume use a box of 200 to keep pace with production without stopping to reorder. Remodelers retrofitting existing pilaster cabinets with new hardware, or replacing worn brackets in an older installation, also reach for these. Because these are left-side brackets, they pair with the corresponding right-side brackets to complete each shelf position. Both sides are needed for a full installation.
Yes, provided the existing pilaster strip is the standard 3/4-inch width. Match the side: these are left-position brackets. You will also need the corresponding right-position brackets to replace the full shelf complement.
No. These are manufactured for the left pilaster rail. Right-side installation requires the right-position bracket, which is a separate SKU in the 4PIL series.
A standard shelf uses four bracket points: two on the left rail and two on the right rail. One box of 200 left-position brackets supports up to 100 shelf positions on the left side.
This SKU ships in a box of 200. Smaller packs, if available, are separate SKUs in the 4PIL series.
With 200 steel left-position brackets in one box, there is enough hardware on hand to finish a full cabinet run or keep a shop supplied through a busy install season without chasing down a reorder.
Sold In: 1 Box