Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf waste pullout is a bottom mount trash pullout made for a 15 inch base cabinet. This Rev-A-Shelf kitchen cabinet trash pullout uses a powder-coated wire frame with a black carriage and two black 27 quart waste bins. The unit includes full extension slides with soft close action, so the bins move out fully for access and return smoothly. This black waste pullout mounts to the cabinet door and floor, and it includes pre-assembled door-mount brackets to simplify setup. For buyers who want a cabinet door mount trash pullout with a double-bin layout, this model combines concealed storage, two-bin sorting, and soft-close operation in one preconfigured pullout.
Key specs to confirm: This bottom mount trash pullout is designed for a 15 inch base cabinet and includes two 27 quart bins. Buyers should confirm the cabinet opening, interior depth, interior height, door clearance, and floor area available for the pullout frame and slide travel. Because this unit mounts to the cabinet door and floor, verify that the door position and hinge arrangement allow the pullout to operate without interference. The product data confirms soft close and full extension slides, but it does not list exact installed dimensions, load details, or compliance information. Those details should be confirmed with the manufacturer or technical documentation if needed for your project.
What's included: One black carriage, two 27 quart black bins, soft close slides, and pre-assembled door-mount brackets.
What to verify before ordering: Confirm your cabinet is a 15 inch base cabinet, check interior clearances for a full extension trash pullout, make sure the cabinet floor is suitable for bottom mounting, and verify door attachment points and hinge clearance before installation. Follow manufacturer installation guidance and local building requirements where applicable.
A double bin waste pullout is often chosen when a kitchen needs cleaner access to trash without leaving a freestanding can in the walkway. This Rev-A-Shelf waste pullout fits that need by storing two 27 quart waste bins inside a base cabinet while keeping them easy to reach on full extension slides. In a busy kitchen, that matters because the user can pull the bins forward for prep scraps, packaging, or recycling and then return the unit with soft close action.
This model is especially relevant for buyers planning a 15 inch base cabinet waste pullout in a remodel or replacement project. The product data states that it is designed for a 15 inch base cabinet, which gives installers a clear starting point. It also states that the unit mounts to the cabinet door and floor. That means the door moves with the pullout, which many buyers prefer because it creates one motion instead of opening the door first and then reaching inside. The included pre-assembled door-mount brackets can also help streamline installation planning.
For households or work areas that sort waste, the two-bin layout is a practical advantage. One bin can be used for trash and the other for recycling, or both bins can be assigned by task. The black waste pullout finish and black bins provide a uniform look inside the cabinet. The powder-coated wire frame is another verified detail that supports the overall carriage structure.
Before purchase, buyers should still confirm the details not listed in the product data. Exact installed width, depth, and height should be checked against the cabinet interior. Hinge placement and door swing should also be reviewed so the cabinet door mount trash pullout can open and close freely. If your project requires load data, code-related documentation, or any special clearance information, confirm those points with the manufacturer before ordering.
When comparing a soft close waste pullout to other pullout styles, the main differences usually come down to mounting method, access, included parts, and how much sorting capacity is built in. This Rev-A-Shelf model is a bottom mount trash pullout with full extension soft close slides, so it is aimed at buyers who want the bins to travel outward fully and close in a controlled way. That can be a better fit than simpler pullouts when smooth operation and easier access matter.
The included configuration is also important. Some pullouts require separate bin selection or extra door-mount hardware, while this product includes the black carriage, two 27 quart waste bins, soft close slides, and pre-assembled door-mount brackets. For installers, that can make the scope of the package easier to review before the job starts. For buyers, it reduces uncertainty about whether the bins are part of the order.
Another point to compare is cabinet application. This kitchen cabinet trash pullout is specifically described for a 15 inch base cabinet. That is more useful than a broad category label because buyers can quickly decide whether the cabinet class matches the intended opening. The black finish may also matter for projects where visible interior hardware should coordinate with dark cabinet interiors.
Rev-A-Shelf is clearly identified as the brand, and the product data gives enough verified information to evaluate the pullout type, bin count, mounting style, and slide function. For any project where dimensional tolerances are tight, use the manufacturer documentation to confirm exact measurements before drilling or final installation.
This Rev-A-Shelf waste pullout is designed for a 15 inch base cabinet. Confirm your cabinet's interior opening and clearances before ordering.
This bottom mount trash pullout includes two black 27 quart waste bins.
This cabinet door mount trash pullout mounts to the cabinet door and floor, and it includes pre-assembled door-mount brackets.
This soft close waste pullout includes soft close slides with full extension travel.
This kitchen cabinet trash pullout is described for a 15 inch base cabinet.
This black waste pullout has a black carriage, black bins, and a powder-coated wire frame.
This bottom mount trash pullout requires you to confirm cabinet opening, interior depth, height, floor area, and door and hinge clearance.
This product listing does not provide exact installed dimensions. Confirm technical measurements with the manufacturer documentation before purchase.
This Rev-A-Shelf waste pullout should be installed using manufacturer installation guidance and local building requirements where applicable.
Soft close waste pullout buyers usually want three things: cabinet fit, the right bin setup, and clear included hardware. This Rev-A-Shelf unit is a bottom mount trash pullout designed for a 15 inch base cabinet, and it includes two 27 quart black bins, a black carriage, soft close slides, and pre-assembled door-mount brackets. Before purchase, confirm your cabinet interior dimensions, floor-mount area, and door clearance so the full extension pullout can operate correctly. That quick check helps make sure the selected pullout matches the cabinet and the installation plan.
Sold In: 1 Each
