Rev-A-Shelf Edge Manganese 2-Space & Earring Holder Case 6-1/2"W x 12-1/16"D x 1-11/16"H, Aluminum - 5E512-16-1

Choose a Rev-A-Shelf earring holder case

Rev-A-Shelf earring holder case is an optional aluminum case made to sit on top of an Edge tray that is sold separately. This Edge earring holder case gives buyers a dedicated way to add earring storage to a modular closet system accessory layout without changing the rest of the tray setup. The product is made by Rev-A-Shelf Corporation and finished in manganese. As a closet jewelry organizer case, it is sized at 6-1/2 inches wide, 12-1/16 inches deep, and 1-11/16 inches high. Buyers planning a closet tray top case should note that this item is the case only and is intended for use with an Edge tray accessory below it.

Use this closet jewelry organizer case

• Rev-A-Shelf brand case - Helps buyers match this accessory to other Rev-A-Shelf closet organization components.
• Edge 2-space and earring holder case design - Adds a dedicated jewelry storage format for earrings and small items within an Edge tray layout.
• Made of aluminum - Gives the case a metal construction for buyers who want a non-wood accessory in their closet organizer plan.
• Manganese color - Supports visual coordination with other closet components in a darker finish.
• Optional case for Edge trays - Lets buyers expand storage only where needed instead of replacing the full tray setup.
• Sits on top of an Edge tray - Clarifies the intended placement so installers can plan vertical space and tray use correctly.
• 6-1/2 inch width - Helps confirm whether the case footprint suits the available tray area.
• 12-1/16 inch depth - Helps buyers check front-to-back fit before ordering for a specific tray application.
• 1-11/16 inch height - Helps determine clearance when stacking this closet tray top case within the closet design.
• Includes one Edge 2-space and earring holder case - Confirms that the package contains the case only as listed in the verified product data.

Confirm Edge tray accessory fit

Key specs to confirm: This aluminum earring holder case measures 6-1/2 inches wide, 12-1/16 inches deep, and 1-11/16 inches high. It is described as an optional case that sits on top of an Edge tray, and the tray is sold separately. Before purchase, confirm that your existing or planned Edge tray accepts this top-mounted accessory and that the available depth and height in your closet layout match these dimensions. The verified data identifies the color as manganese and the material as aluminum. Any load, safety, compliance, or installation tolerance details are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf Edge 2-space and earring holder case in aluminum with a manganese finish.

What to verify before ordering: Confirm that you are ordering for an Edge tray application, that the tray itself is purchased separately if needed, that the tray size and layout support this case, and that the finished dimensions fit your available closet space and intended jewelry storage use.

Compare aluminum earring holder case details

Match earring storage case to daily use

Buyers usually look at an earring storage case like this when they already have a tray-based closet system and want more defined storage for jewelry. In that setting, the main pain point is often loose accessories shifting around in an open tray or being mixed with watches, bracelets, or small personal items. This Rev-A-Shelf earring holder case is built as an optional insert-style case that sits on top of an Edge tray, so it fits the need for a more organized jewelry area without requiring a full redesign of the closet section.

For a professional installer, this matters during planning because the product has a clear role. It is not described as a standalone drawer, a wall-mounted organizer, or a complete tray assembly. It is a tray-top accessory. That distinction helps avoid ordering mistakes. If the project already includes an Edge tray accessory, this manganese jewelry case can be considered as an add-on for a more specific storage function. If the project does not yet include the tray, the buyer should plan for that separate component before installation.

For a homeowner or serious DIY buyer, the practical value is in targeted organization. The verified name identifies this as a 2-space and earring holder case, which signals that it is meant for small-item organization rather than broad general storage. The aluminum construction may also appeal to buyers who want a metal accessory instead of a fabric or wood insert. Because the verified dimensions are 6-1/2 inches wide, 12-1/16 inches deep, and 1-11/16 inches high, the case can be checked against available tray area and vertical clearance before purchase.

Another common issue is assuming that all closet jewelry organizer case products fit every tray or drawer system. That should not be assumed here. The verified description only states that this case sits on top of an Edge tray. Buyers should confirm tray compatibility, surrounding clearance, and whether the intended closet tray top case arrangement leaves enough room for convenient access once installed. Follow manufacturer installation guidance and local building requirements where applicable.

Compare closet jewelry organizer case options

When buyers compare this product type with other jewelry storage accessories, the most useful differences are usually material, mounting style, included parts, and intended system fit. This Edge earring holder case is clearly identified as an aluminum accessory in a manganese finish, and it is intended to sit on top of an Edge tray. That gives it a defined use within a modular closet system accessory plan.

Some organizer accessories are sold as complete assemblies, while others are sold as add-on parts. This product falls into the add-on category because the verified description states that the tray is sold separately. That is important for budgeting, planning, and installation sequencing. It also means the buyer should evaluate the complete setup rather than the case by itself.

Another comparison point is footprint. The listed dimensions provide a direct way to check whether this aluminum earring holder case suits the available tray area. Buyers who need a compact jewelry organizer may find the listed size useful, while those planning a larger storage layout should confirm whether one case is enough or whether multiple accessories are needed in the overall closet design. The verified package contents list one case, so any additional tray components or matching accessories should be reviewed separately.

Brand consistency can also matter in closet projects. Rev-A-Shelf is the verified brand for this product, and buyers often prefer to keep accessories within the same product family when planning a coordinated organizer layout. Even so, the key decision remains fit. Before ordering, confirm that the intended tray, dimensions, and use case all align with this specific closet jewelry organizer case.

Ask fit questions before ordering

Finish your Rev-A-Shelf closet organizer plan

Rev-A-Shelf closet organizer buyers should treat this item as a tray-top accessory and confirm the full setup before purchase. The verified package includes one aluminum earring holder case in manganese, sized 6-1/2 inches by 12-1/16 inches by 1-11/16 inches. Because the Edge tray is sold separately, check tray compatibility, available clearance, and your intended jewelry storage layout before ordering. That simple review helps ensure the case fits the project and works as planned within your closet organization design.

Review closet tray top case needs

If you are matching accessories within an Edge layout, this product is a dedicated case rather than a full tray assembly. Confirm the tray requirement, dimensions, and intended use for earring storage so your order matches the installation plan.