Rev-A-Shelf Edge Manganese Trimmable Mat 50-1/2"W x 19-1/4"D x 1/16"H, Aluminum - 5E8220-50-16-13-1

Choose a Rev-A-Shelf trimmable mat

Rev-A-Shelf trimmable mat is an aluminum mat made to sit on the bottom of an Edge tray in a modular closet system. This Rev-A-Shelf edge mat is finished in manganese, described in the product data as orion gray, and is sold per each. The product name lists a size of 50-1/2 inches wide, 19-1/4 inches deep, and 1/16 inch high, which helps buyers confirm tray coverage before ordering. If you need an edge trimmable mat for a matching Edge tray mat application, this piece is intended as an optional insert rather than a stand-alone tray. For buyers comparing a trimmable shelf mat by material and finish, the verified construction is aluminum and the verified color is manganese.

See how this edge trimmable mat helps

• Rev-A-Shelf brand - Gives buyers a clear manufacturer reference when matching accessories to an existing closet or tray setup.
• Edge trimmable mat design - Helps you fit the mat to your application where trim-to-size flexibility is needed.
• Made of aluminum - Provides a metal mat option for buyers who want a material other than fabric or plastic inserts.
• Manganese color - Helps coordinate the mat finish with surrounding closet components and tray interiors.
• Optional mat for Edge tray bottoms - Clarifies that this product is intended to sit inside an Edge tray, which helps avoid ordering it as a tray itself.
• Product size of 50-1/2 inches wide - Helps buyers compare overall tray width before purchase.
• Product size of 19-1/4 inches deep - Supports front-to-back fit checks for compatible tray applications.
• Product thickness of 1/16 inch - Helps buyers account for a low-profile insert when planning tray use.
• Sold per each - Makes ordering quantity straightforward for single-tray or multi-tray layouts.

Confirm edge tray mat fit details

Key specs to confirm: This aluminum trimmable mat is listed at 50-1/2 inches wide, 19-1/4 inches deep, and 1/16 inch high. The verified use case is that the mat sits on the bottom of a Rev-A-Shelf Edge tray, which is sold separately. Before ordering, confirm the inside dimensions of your tray, how much trimming is needed, and whether the manganese or orion gray appearance matches your project. If you need safety, load, compliance, or other technical performance details, those are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf Edge trimmable mat. The verified data does not include an Edge tray, mounting hardware, cutting template, or installation tools.

What to verify before ordering: Confirm that you are ordering a mat and not a tray, check your tray interior width and depth, verify that your application uses an Edge tray, and review whether the listed dimensions and aluminum construction fit your closet system plan.

Compare aluminum trimmable mat options

Use an edge tray mat where needed

Buyers usually look for an edge trimmable mat when they already have an Edge tray or are planning a modular closet system with coordinated accessories. In that setting, the main pain point is often not finding a generic liner, but confirming that the insert is intended for the tray style they are using. This Rev-A-Shelf trimmable mat addresses that by being identified as an optional mat that sits on the bottom of an Edge tray sold separately.

That distinction matters during ordering. A buyer outfitting a closet drawer-style tray, shelf tray, or accessory tray may see the words mat, tray, and insert used loosely across listings. Here, the verified product type is a mat, not the tray body. If you are replacing an existing edge tray mat, measure the current tray interior and compare it with the listed dimensions of 50-1/2 inches wide and 19-1/4 inches deep. If your tray opening differs, confirm how much trimming is acceptable for your installation before purchase.

The aluminum trimmable mat format also helps buyers who want a low-profile insert. The listed height is 1/16 inch, so it is a thin accessory rather than a thick pad. For a closet system mat, that can matter when you want to preserve interior tray space while still adding the intended bottom layer. The verified finish is manganese, and the product data also references orion gray, so finish matching should be reviewed against the rest of your closet hardware and tray components.

A serious DIY buyer or installer may also be ordering several pieces for a multi-bay closet layout. Since this product is sold per each, quantity planning is simple, but compatibility planning still matters. Check whether every tray in the project uses the same inside dimensions. If one section differs, the same trimmable shelf mat may not be the right starting size for all locations. Follow manufacturer installation guidance and local building requirements where applicable.

Compare this closet system mat with basics

When buyers compare this closet system mat with more basic inserts, the first useful difference is product clarity. The verified data identifies this item as a Rev-A-Shelf edge mat made for the bottom of an Edge tray. That gives a cleaner compatibility path than buying a non-specific insert and hoping it fits the tray profile or intended use.

The second difference is the verified material. This is an aluminum trimmable mat, not an unspecified liner. For buyers who want a metal accessory to match closet components, that material callout can be important during specification and replacement work. The listed manganese finish also gives a defined color direction instead of leaving appearance open to interpretation.

Another practical point is dimensional transparency. The product name provides width, depth, and thickness, which are the core numbers most buyers need for tray insert planning. Many ordering mistakes happen when a buyer confirms only overall cabinet width and not the actual tray interior. With a product like this, the safer process is to verify the tray itself first, then compare those measurements to the listed 50-1/2 inch by 19-1/4 inch format and account for trimming needs.

Finally, this Rev-A-Shelf trimmable mat is easier to evaluate because the included content is simple and specific: one mat, sold per each. If your project requires a tray, mounting parts, or extra installation items, those should be sourced separately unless confirmed in technical documentation. That straightforward scope helps installers and purchasing teams avoid assuming extra components are in the carton.

Ask fit questions about closet system mat

Order the right Rev-A-Shelf edge mat

Rev-A-Shelf edge mat is a tray-bottom accessory for buyers who need a verified aluminum trimmable mat for an Edge tray application. Before purchase, confirm that you need the mat only, not the tray, and compare your tray interior against the listed 50-1/2 inch width, 19-1/4 inch depth, and 1/16 inch thickness. The verified package includes one mat sold per each, with the tray sold separately. Double-check finish, trimming needs, and tray compatibility so the part matches your closet system layout.