Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica Graphite Veil laminate sample gives you a 3 x 5 inch piece of the 5391-99 metal finish to evaluate before committing to full sheets, so you can view the actual surface in your project lighting and with adjacent materials. This sample represents a DecoMetal metal laminate from Formica Corporation, which uses aluminum or copper sheet with a phenolic back, helping you understand both the visual effect and construction you will work with on site. The Grade 86 construction at 0.050 inch, or 1.3 mm, shows the thickness you will handle during fabrication, which matters when planning edge details, reveals, or transitions. The phenolic back shown on this sample prevents creasing and supports adhesion to substrates during fabrication, giving you a concrete sense of how the laminate will behave when bent, pressed, or bonded in vertical interior applications.
This Formica 5391-99 Graphite Veil laminate sample is described as engineered for vertical interior applications, so it reflects how the metal surface and phenolic back are intended to perform on wall panels, fixtures, and casework faces rather than horizontal wear surfaces. The 0.050 inch, or 1.3 mm, thickness visible at the sample edge helps you visualize build-up at panel joints and corners, which matters when aligning adjacent materials and planning reveals. Because the phenolic back prevents creasing, examining this small piece under handling gives insight into how full sheets will respond when being carried, staged, and bonded in the shop or on site, which supports planning for handling and storage in your workflow.
The Formica Graphite Veil laminate sample is particularly useful anywhere you are considering DecoMetal metal laminate on vertical interior applications, because it lets you see the actual metal surface with the specified 5391-99 finish in the same environment as your millwork. With its 3 x 5 inch format, this sample can be set directly against cabinet doors, wall panels, or fixture components, making it easier to judge how the metal finish interacts with existing veneers, paints, or solid colors in your scheme. The thickness of 0.050 inch, or 1.3 mm, can be inspected visually and by touch, giving you a reference for how much this laminate will stand proud or flush when used alongside other surfacing materials in a typical millwork stack.
The DecoMetal metal laminate structure shown in this sample uses an aluminum or copper sheet with a phenolic back, and that construction directly influences fabrication consistency because the phenolic back prevents creasing under handling. As you flex and manipulate the sample, you can see how the backing supports the metal face, which helps anticipate how full sheets will tolerate routing, trimming, and clamping during your normal shop process. The backing is also described as allowing improved adhesion to substrates, so looking at and feeling this backside surface lets you relate it to your preferred bonding materials and press methods, helping you align the product with your current substrate selection. The fact that it is engineered for vertical interior applications ties these details together, giving you a focused understanding of how the material is intended to perform on finished walls, casework faces, and decorative elements when used within its described role.
The sample represents Formica DecoMetal 5391-99 Graphite Veil metal laminate, showing the actual metal finish and phenolic-backed construction so you can evaluate appearance and structure before specifying it.
The laminate represented by this sample is Grade 86 at 0.050 inch, or 1.3 mm, which helps you understand edge build and transitions when planning panel layouts and joinery details.
The phenolic back prevents creasing and allows improved adhesion to substrates, so it supports cleaner handling and bonding during fabrication of vertical interior installations.
The laminate shown by this sample is described as engineered for vertical interior applications, aligning it with wall panels, casework faces, and similar interior design elements.
The 3 x 5 inch size makes the Formica Graphite Veil sample easy to position against cabinets, panels, or fixtures so you can judge color, pattern, and thickness in context.
DecoMetal metal laminate in this sample refers to a matte, mirror, hammered, or antiqued aluminum or copper sheet with a phenolic back, illustrating Formica's metal-faced construction.
The Formica Graphite Veil laminate sample from Wurth Baer Supply presents the 5391-99 DecoMetal metal laminate in a compact format, combining aluminum or copper sheet with a phenolic back at 0.050 inch, or 1.3 mm, thickness. Because this construction is engineered for vertical interior applications, using the sample during design and shop planning helps align finish choice, thickness expectations, and substrate strategy with the actual material characteristics you will work with on the project.
Sold In: 1 Each