Formica 9410-99 Brushed Coin Laminate Sample, 3"x5" Metal Finish

Formica 9410-99 Brushed Coin Laminate Sample Use

Formica 9410-99 Brushed Coin Laminate Sample provides a 3 inch by 5 inch piece of metal laminate so you can review the brushed coin metal finish and overall look before planning a larger installation. This laminate is described as DecoMetal metal laminate, which means it uses aluminum or copper sheet as the visible face, giving projects a true metal appearance instead of a printed pattern. The sample is identified as P Grade 85 at 0.040 inch, or 1.0 mm, thickness, so you can evaluate the thickness profile in relation to surrounding materials and edge treatments. The laminate construction places the metal face over a phenolic back, which prevents creasing, allowing the material to resist folding damage during handling, templating, or dry fitting. That same phenolic back also improves adhesion to substrates, which matters when you are planning reliable bonding in vertical interior applications.

Key Laminate Sample Details For Planning Work

• The 3 inch by 5 inch sample size lets you see the Brushed Coin finish on an actual piece of laminate, helping you judge color and sheen against adjacent materials and lighting.
• The DecoMetal metal laminate construction uses polished, anodized, matte, brushed, or mirror aluminum or copper sheet with a phenolic back, giving you a real metal surface to evaluate for design intent.
• The phenolic back is specified to prevent creasing, so you can handle and position the sample while getting a sense of how full sheets will behave in normal shop and jobsite conditions.
• The same phenolic back is described as allowing improved adhesion to substrates, which helps you understand bonding expectations when planning adhesives and lamination steps for vertical installations.
• The laminate is engineered for vertical interior applications, signaling its intended orientation and environment so you can match it to wall panels, casework faces, or other upright surfaces.

Installation-Oriented Details From The Sample

This Formica metal laminate sample is identified at 0.040 inch, or 1.0 mm, thickness, so you can compare its build to adjacent materials where flush transitions or reveals matter. The phenolic back noted on the laminate is engineered to prevent creasing, giving you a realistic sense of how the full-size product will respond to handling during layout and trimming. Because the phenolic back also allows improved adhesion to substrates, the sample helps you anticipate how the laminate will seat during press work in vertical interior applications. The Brushed Coin finish is part of the DecoMetal metal laminate line using aluminum or copper sheet, giving you a clear indication of the metallic character that will influence edge treatment, seam layout, and surrounding hardware choices.

Using This Formica DecoMetal Sample In Projects

Where This Metal Laminate Sample Fits Best

This 3 inch by 5 inch Formica metal laminate sample is identified specifically as Brushed Coin, allowing you to match this finish to other Formica 9410-99 Brushed Coin metal laminate used on vertical interior applications. The DecoMetal construction, described as aluminum or copper sheet with a phenolic back, is geared toward visual surfaces where a metal face is desired, such as interior wall areas or vertical casework faces. Because the product is a laminate from the Formica HPL category, it aligns with high-pressure laminate workflows where bonding to a substrate is part of the build. The P Grade 85 designation for this metal laminate sample provides a consistent reference when comparing to other Formica DecoMetal options in the same project. The finish description as part of the DecoMetal family means this sample can be used to coordinate with other metal finishes that share similar construction.

Details That Support Repeatable Vertical Interior Results

The laminate sample is stated to be engineered for vertical interior applications, which directs its use toward upright surfaces instead of horizontal wear areas, helping you plan panel layouts and substrate selection accordingly. The 0.040 inch, or 1.0 mm, thickness specified for this DecoMetal metal laminate sample gives you a predictable profile when designing reveals, edge treatments, and transitions to adjacent laminates or surfaces. The phenolic back is described as preventing creasing, meaning the laminate structure resists fold lines that could otherwise affect appearance on tall panels or door faces. That same phenolic back is also said to allow improved adhesion to substrates, supporting consistent bond quality on wall panels or cabinet ends where bond integrity affects long-term appearance. Because the visible layer is either aluminum or copper sheet, the Brushed Coin surface delivers a true metal look that can be aligned with hardware, trims, and other metal elements.

Common Questions About This Brushed Coin Sample

Select This Sample For Metal Laminate Planning

The Formica 9410-99 Brushed Coin Laminate Sample, supplied as a 3 inch by 5 inch DecoMetal metal laminate piece with a phenolic back, lets you evaluate true aluminum or copper sheet construction in Grade 85 at 0.040 inch thickness. Its engineering for vertical interior applications, combined with a phenolic back that prevents creasing and allows improved adhesion to substrates, helps you assess how the full-size laminate will perform on wall panels and casework faces. Using this specific Brushed Coin finish sample supports confident design decisions when aligning Formica metal laminate surfaces with other project materials.