Formica 6435-99 Woven Brass Sample For Finish Selection

Formica 6435-99 Woven Brass laminate sample gives you a 3x5 inch piece of the DecoMetal metal laminate finish so you can review the Woven Brass look on the bench before committing to full sheets on a project. This sample represents a DecoMetal metal laminate made from polished, anodized, matte, brushed or mirror aluminum or copper sheet bonded to a phenolic back, so you can evaluate both the appearance and the construction you will work with in the shop. The 3x5 inch size provides a compact format for matching with other materials on a job board or submittal set. Seeing the actual Formica Corporation metal finish under project lighting helps with selecting whether this Woven Brass look fits vertical interior design intent.

Key Formica DecoMetal Sample Details For Pros

• The sample represents p GRADE 85 (0.040 inch / 1.0 mm) DecoMetal metal laminate, so you can understand the thickness and handling when planning fabrication steps or edge details.
• The metal layer is described as polished, anodized, matte, brushed or mirror aluminum or copper sheet, giving you a clear sense of the metallic character you will be working into vertical interior surfaces.
• A phenolic back is bonded to the metal sheet, which prevents creasing during handling and layout, helping maintain a flat, workable piece during lamination steps.
• The phenolic back also allows for improved adhesion to substrates, which matters when you are planning gluing procedures and want consistent bond performance on vertical interior panels.
• The laminate is engineered for vertical interior applications, aligning it with wall panels, casework faces, and similar non-horizontal installations where decorative metal surfacing is needed.

Vertical Interior Laminate Details For Installation Planning

This Formica 6435-99 Woven Brass laminate sample represents p GRADE 85 DecoMetal metal laminate at 0.040 inch (1.0 mm) thickness, which gives you a realistic sense of edge buildup and transition when planning how it will meet adjacent materials. The phenolic back on the metal sheet is designed to prevent creasing, so you can handle and trial-fit the sample against substrates, trims, and reveals without distorting the face. Because the phenolic back allows for improved adhesion to substrates, this sample helps you plan adhesive selection and pressing routines for vertical interior applications using the same construction found on production sheets.

Using The Woven Brass Sample In Real Projects

Where This Formica Metal Finish Is Applied

The 3x5 inch Formica 6435-99 Woven Brass laminate sample shows a DecoMetal metal laminate that is engineered for vertical interior applications, so it is suited to wall panels, cabinet faces, and other upright decorative surfaces rather than horizontal worktops. The underlying construction of polished, anodized, matte, brushed or mirror aluminum or copper sheet over a phenolic back demonstrates how a true metal face will present in those locations. Because the phenolic back prevents creasing, you can bring the sample onto job sites, hold it against existing millwork, and move it between rooms without the face deforming, supporting more confident finish decisions in real interiors. This helps align design expectations with how the metal laminate will appear when installed on vertical surfaces.

How DecoMetal Construction Supports Consistent Results

The Formica DecoMetal metal laminate structure shown by this sample uses a 0.040 inch (1.0 mm) p GRADE 85 build, giving you a sturdy feel that reflects the material you will cut and bond in the shop. The phenolic back both prevents creasing and allows for improved adhesion to substrates, which supports consistent lamination across multiple panels when you move from sampling to production. Knowing that the decorative face is formed from polished, anodized, matte, brushed or mirror aluminum or copper sheet helps anticipate how the metal finish will respond to typical fabrication steps such as trimming and routing for vertical interior components. With the 3x5 inch format, you can quickly compare this Woven Brass finish against other Formica HPL and wood products from Wurth Baer Supply, helping coordinate surfacing choices across a complete project.

Common Questions About This Formica Woven Brass Sample

Select This Sample To Plan Vertical Metal Surfacing

The Formica 6435-99 Woven Brass laminate sample from Wurth Baer Supply provides a 3x5 inch representation of p GRADE 85 DecoMetal metal laminate built from aluminum or copper sheet over a phenolic back. Using this sample, you can judge how the Woven Brass finish, thickness, and rigid feel will work across vertical interior applications before ordering project quantities. Add this sample to your material set when planning wall panels, casework faces, or other interior surfaces that call for a Formica Corporation metal laminate aesthetic.