Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica 6433-99 Woven Argent laminate sample gives you a 2 x 3 inch piece of this DecoMetal metal laminate so you can review the Woven Argent look and metal finish on site before planning a full installation. The sample represents a DecoMetal metal laminate made from polished, anodized, matte, brushed or mirror aluminum or copper sheet bonded to a phenolic back, so you see the actual Formica Corporation surface you would be working with on a job. This sample reflects a Grade 85 laminate with a nominal thickness of .040 inch, or 1.0 mm, which helps you visualize build-ups, reveals and edge conditions on vertical interior applications. By working directly with this small-format piece, you can hold the Woven Argent pattern against cabinets, wall panels or fixtures and judge how the metal finish interacts with surrounding materials under real project lighting.
The Web Description specifies that this DecoMetal metal laminate is engineered for vertical interior applications, so the Woven Argent laminate sample helps you plan installations on walls, cabinet faces and similar surfaces rather than horizontal worktops. With a Grade 85 laminate thickness of .040 inch, or 1.0 mm, the sample lets you gauge how that thickness will interact with reveals, adjacent panels or trim components in your design. The phenolic back described for this DecoMetal product resists creasing and supports improved adhesion to substrates, which influences how you plan substrate preparation, adhesive spread and pressure when scaling up from the sample to job-sized panels. Using this sample, you can align pattern direction and metal reflectivity with your intended vertical layout before committing to full sheet quantities.
The SAP description identifies this item as 2X3 WOVEN ARGENT DECOMETAL, and the category places it under Formica HPL laminate, so it ties directly into laminate and surfacing work for interior projects. The Web Description states that this metal laminate is engineered for vertical interior applications, which points it toward installations such as interior wall panels, cabinet faces, display fixtures and similar non-horizontal elements. Because the laminate uses polished, anodized, matte, brushed or mirror aluminum or copper sheet, the Woven Argent sample lets you see how a real metal face will perform visually wherever a design calls for metallic surfacing. For shops and installers working with laminate-based interiors, this sample becomes a quick way to confirm that the Woven Argent tone and texture support the desired look on upright surfaces.
The Web Description explains that the DecoMetal metal laminate uses a phenolic back designed to prevent creasing, which matters when handling, cutting or transporting panels during fabrication because resistance to creasing supports cleaner lines and reduces surface damage risk. That same phenolic back allows for improved adhesion to substrates, so the sample represents how the back side will interact with typical laminate substrates in vertical interior use. With a Grade 85 laminate thickness of .040 inch, or 1.0 mm, the sample shows a relatively thin profile that still reads as true metal, which can simplify transitions to adjacent laminate, edgebanding or trim while maintaining a metal-faced surface. Together, the phenolic back and controlled thickness give you practical information about how the full-size DecoMetal sheets will behave from layout through finishing in shop and field conditions.
The Formica 6433-99 Woven Argent laminate sample represents a DecoMetal metal laminate with a Woven Argent finish, so you can evaluate the actual Formica Corporation metal surface for vertical interior projects.
This Woven Argent DecoMetal laminate uses polished, anodized, matte, brushed or mirror aluminum or copper sheet bonded to a phenolic back, which provides a metal face with backing support for adhesion.
The Formica Woven Argent laminate is described as Grade 85 with a thickness of .040 inch, or 1.0 mm, so the sample reflects that installed profile for planning joints and transitions.
This DecoMetal laminate is engineered for vertical interior applications, guiding its use toward wall panels, cabinet fronts and similar upright interior surfaces rather than horizontal worktops.
The phenolic back on this metal laminate prevents creasing and allows improved adhesion to substrates, which affects how the material handles and bonds during fabrication of vertical interior panels.
Part number Y0806433990203 identifies this specific 2 x 3 Woven Argent DecoMetal laminate sample, tying it to the corresponding Formica product in the Formica HPL laminate family.
This Formica 6433-99 Woven Argent laminate sample from Wurth Baer Supply gives you a small but accurate piece of Grade 85 DecoMetal laminate to evaluate for vertical interior applications. By working with the actual aluminum or copper-faced, phenolic-backed construction in a 2 x 3 inch format, you can judge color, pattern, reflectivity and profile against your project conditions. When the sample aligns with your design intent, it points directly to the corresponding Formica Woven Argent DecoMetal laminate you would use on interior walls, cabinet fronts or fixtures.
Sold In: 1 Each