Formica Zinc Patina Laminate Sample For Finish Selection

Formica 3723-99 Zinc Patina laminate sample gives you a 3 x 5 inch piece of the DecoMetal metal laminate so you can evaluate this finish on real jobs. This sample represents a metal laminate made from polished, anodized, matte, brushed or mirror aluminum or copper sheet bonded to a phenolic back, so what you see in hand reflects the actual construction of the product line in use. The laminate is grade 85 at 0.040 inch, or 1.0 mm, thick, which shows how the metal face and phenolic back work together as a single sheet. This thickness helps demonstrate how the sheet will sit against typical substrates. The phenolic back is engineered to prevent creasing, which keeps the sheet stable when handled or flexed during layout. That phenolic back also allows improved adhesion to substrates, which matters when you are planning long vertical interior runs. The laminate is engineered for vertical interior applications, giving you a clear sense of its intended use.

Key Formica Metal Laminate Sample Advantages

• The 3 x 5 inch size provides a compact piece that fits in sample rings or pockets while still showing enough surface to judge the Zinc Patina appearance on real jobs.
• Metal laminate construction using aluminum or copper sheet bonded to a phenolic back demonstrates how the DecoMetal layer behaves compared to standard high-pressure laminate surfaces in design work.
• Grade 85, 0.040 inch (1.0 mm) thickness reflects the working thickness of the DecoMetal sheet so you can anticipate edge profiles and transitions against adjacent materials.
• The phenolic back is designed to prevent creasing, so the sheet stays flat when handled during mockups or when bent lightly during fit checks on vertical panels.
• Improved adhesion from the phenolic back shows how the laminate is intended to bond to substrates, helping you evaluate it for doors, panels, and other vertical interior surfaces.

Understanding Formica DecoMetal Vertical Application Use

This Formica Zinc Patina metal laminate sample represents a product engineered for vertical interior applications, so it reflects how DecoMetal behaves on walls, doors, panels, or similar surfaces. Because the metal sheet is supported by a phenolic back, the sample shows how the laminate resists creasing when you align it to a substrate or dry-fit against corners. The 0.040 inch, or 1.0 mm, thickness demonstrates the depth you will accommodate at reveals or seams. By working with this 3 x 5 inch piece, you can see how the DecoMetal surface finish interacts with light in the space and how the edge thickness feels where it meets other materials on vertical work.

How This Formica Sample Supports Real Projects

Where The Zinc Patina Sample Fits Best

This Formica 3723-99 Zinc Patina laminate sample fits into workflows where you need to evaluate DecoMetal on vertical interior applications before committing to full sheet quantities. Because the metal laminate is based on aluminum or copper sheet, this sample lets you assess how that metal character looks in relation to other finishes on casework or wall systems. The 3 x 5 inch format is easy to move between the jobsite and the shop, so you can hold it against substrates, trim, or adjacent panels to understand how the Zinc Patina tone behaves. Since the product class is laminate within Formica HPL offerings, this sample also helps you compare metal-faced options to other laminate solutions in your material set. The phenolic back construction visible on the sample gives you a direct read on how the sheet will transition at edges, cutouts, and terminations in vertical layouts.

Details That Support Consistent Vertical Results

The DecoMetal metal laminate structure shown in this sample combines aluminum or copper sheet with a phenolic back, which is designed to prevent creasing so installers can work with stable, flat material on vertical interior runs. That same phenolic back allows improved adhesion to substrates, so the sample reflects how the laminate is intended to perform when bonded in the field or shop. At 0.040 inch, or 1.0 mm, grade 85 thickness, the piece illustrates the exact build you will manage at seams, minimizing surprises during layout. By handling this sample, you can see how the metal surface finish types - polished, anodized, matte, brushed or mirror - relate to the Zinc Patina design and how those finishes respond to project lighting. All of these traits visible in the sample help support repeatable results when you transition from selection to full installation on vertical interior applications.

Common Questions About The Zinc Patina Sample

Select This Formica Sample For Vertical Planning

This Formica 3723-99 Zinc Patina laminate sample from Wurth Baer Supply presents the actual DecoMetal metal laminate construction you will use on vertical interior applications. By working directly with this 3 x 5 inch, grade 85, 0.040 inch (1.0 mm) sample, you can evaluate finish, thickness, and phenolic-backed behavior against your substrates. Add this sample when you need a reliable reference for planning Formica DecoMetal Zinc Patina within your next vertical interior project.