Classic Series sink base cabinet Brownstone, Dartmouth 39 inch W x 24 inch D x 34-1/2 inch H from The Wolf Organization, LLC gives you a dedicated sink base sized for standard kitchen layouts. The two-door cabinet with a center stile creates a defined front opening that supports sink installations while keeping the face frame stable across the 39 inch width. Two false panels provide a consistent front appearance at the sink area, so the cabinet matches adjoining units in a Brownstone Dartmouth run. Cabinet fronts made from 3/4 inch solid maple wood give the working face of the cabinet a solid-wood surface, which matters when doors see frequent daily use. This Classic Series sink base cabinet sits in Wolf Home Products lines, so it aligns with that family for coordinated projects.
The two-door layout with a center stile on this Wolf Dartmouth sink base cabinet shapes the opening you work through during installation and later plumbing access. The center stile divides the span, which helps keep the face frame stable while you work inside the cabinet. A half-depth adjustable shelf of 3/4 inch plywood sits behind the doors, so the rear section can hold items while the front stays open for sink bowls and plumbing runs. Bull-nosed, foil-covered front edges on the shelf give a smooth edge that stands up to contact when items are slid on and off. The shelf is held in place with self-locking 1/4 inch diameter clips on the sides, so once positioned it stays seated in use. The vinyl-covered inside back panel also gives a finished interior surface behind stored items.
This Brownstone sink base cabinet in the Classic Series is sized at 39 inches wide, 24 inches deep, and 34-1/2 inches high, so it fits standard kitchen base cabinet runs that use similar dimensions for counters and appliances. The cabinet with two doors and a center stile creates a front suited to typical double-bowl or large single-bowl sink layouts that align above the face frame sections. Side panels and bottom in 1/2 inch plywood with matching exterior laminate let this cabinet visually tie into surrounding Wolf Home Products in the same finish, which matters when building continuous runs. The 4-1/2 inch high toekick depth of 4-1/16 inch keeps the cabinet front slightly set back at the floor line, matching standard bases for a uniform toe space and visual line along the room.
The pocket drilled rails assembled with 1-1/4 inch screws create a strong front frame on this Classic Series sink base cabinet, which supports accurate alignment between adjoining units during installation. Because the side panels and bottom are glued and stapled into a 1/2 inch dado in the front frame, the joints are locked on multiple faces, helping the box remain square after shimming and leveling. Vinyl-covered inside back panels of 1/2 inch plywood that are glued, nailed into a 1/2 inch dado, and stapled to the hang rail and cabinet bottom form a back that works as a structural diaphragm, resisting twist once the cabinet is tied into the run. All-wood 3/4 inch corner blocks in all corners further brace the carcass, which matters when supporting countertop weight and sink loads. The half-depth adjustable shelf in 3/4 inch plywood, supported on self-locking 1/4 inch diameter clips, stays seated at the chosen height so stored items do not disturb shelf placement over time.
The Classic Series sink base cabinet Brownstone, Dartmouth has overall dimensions of 39 inches wide, 24 inches deep, and 34-1/2 inches high, so it matches standard base cabinet and countertop height expectations.
The cabinet fronts are made from 3/4 inch solid maple wood, giving a solid face that handles frequent door operation and contact in everyday kitchen use while providing a sturdy working front.
On this Wolf Dartmouth sink base cabinet, the rails are pocket drilled and assembled with 1-1/4 inch screws, creating a firmly fastened front frame that maintains alignment under normal loading.
The side panels and bottom are 1/2 inch plywood with matching exterior laminate, and the back panels are vinyl-covered (inside only) 1/2 inch plywood, giving a plywood box with a finished interior back surface.
The interior has a half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges, held on self-locking 1/4 inch diameter clips, providing supported storage while leaving front space open.
The toe kick on this Classic Series sink base cabinet is 4-1/2 inches high and 4-1/16 inches deep, creating a standard recess at floor level for comfortable standing in front of the sink area.
This Wolf Dartmouth sink base cabinet Brownstone, in the Classic Series at 39 inches wide, 24 inches deep, and 34-1/2 inches high, gives you a defined unit to anchor a sink location in a Wolf Home Products layout. The 3/4 inch solid maple cabinet fronts, pocket drilled rails with 1-1/4 inch screws, and 1/2 inch plywood box construction with corner blocks provide a cabinet structure suited to carry countertop and sink assemblies. Using this Wolf 3036394 sink base within a coordinated run lets you align finish, dimensions, and construction style across the project for a consistent installation.
Sold In: 1 Each