Classic Series wall cabinets Brownstone Dartmouth gives a 30 inch wide, 12 inch deep, 18 inch high wall cabinet that creates a defined storage zone over counters while staying shallow enough for comfortable reach in everyday kitchen work.
The cabinet design with two butt doors creates a full-width opening across the 30 inch span, which helps when loading wider items into this 18 inch high cabinet space above work areas.
The web description states that shelves are not available, so the interior volume functions as a clear, unobstructed compartment, which avoids interference when storing taller items within the 18 inch cabinet height.
This wall cabinet is part of the Classic Series from Wolf Home Products, so it aligns with other cabinets in the line for visual continuity when laying out straight or corner wall runs at a consistent 12 inch depth.
This Dartmouth Brownstone wall cabinet uses 1/2 inch plywood side panels and bottom glued and stapled into a 1/2 inch dado in the front frame, so the box holds square as you lift and position it along the wall layout line.
The 1/2 inch plywood back panel is glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, so the back assembly works as a shear panel that helps the cabinet resist twist when anchored to wall studs.
All-wood 3/4 inch corner blocks at every corner tie the frame, sides, bottom, and back together, so fastener loads at the top and bottom of the cabinet distribute across the box during installation.
The 30 inch width, 12 inch depth, and 18 inch height dimensions define the footprint you plan into stud spacing and neighboring cabinets, so the two butt doors align cleanly with adjacent Classic Series wall cabinets.
This Classic Series wall cabinet Brownstone Dartmouth measures 30 inches wide, 12 inches deep, and 18 inches high, so it fits well above counters or appliances where a lower profile wall run is needed.
The two butt doors span the 30 inch opening, which allows the full interior width to be accessed at once, useful when placing wider dishes or pantry items into the 18 inch tall compartment.
Cabinet fronts made from 3/4 inch solid maple wood create a substantial face and door presentation, so this unit visually aligns with other Wolf Home Products cabinets that use the same solid maple fronts in a Brownstone finish.
The side panels and bottom made from 1/2 inch plywood with matching exterior laminate mean the visible sides coordinate with the Brownstone look, supporting use at the end of a run where cabinet sides remain exposed.
The documented absence of shelves in this cabinet leaves the 12 inch deep interior completely open, which suits tall or stacked items that benefit from full-height clearance across the 30 inch width.
The 4-1/2 inch high by 4-1/16 inch deep toe kick dimension on standard cabinets in this series helps you maintain alignment between this wall cabinet and matching base cabinets in the same Classic Series kitchen plan.
The rails on this Wolf Dartmouth wall cabinet are pocket drilled and assembled with 1 1/4 inch screws, giving strong frame joints that help doors stay aligned over time across the 30 inch span.
The 1/2 inch plywood sides and bottom are glued and stapled into a 1/2 inch dado in the cabinet front frame, producing a mechanically interlocked joint that keeps the cabinet square as it is handled, lifted, and mounted.
The 1/2 inch plywood back panel, vinyl-covered on the inside, is glued and nailed into a 1/2 inch dado and stapled to the hang rail and bottom, so the back behaves as a structural panel that supports consistent screw anchoring to wall framing.
All-wood 3/4 inch corner blocks at every corner further tie together the front frame, sides, back, and bottom, so racking forces from loading and door operation spread through the cabinet rather than concentrating at a single joint.
The Classic Series design note that shelves are not available in this model defines a single open cavity, which removes the need to account for shelf clip locations when planning how contents will be arranged inside the cabinet.
The toe kick sizing of 4-1/2 inches high by 4-1/16 inches deep on standard cabinets gives a consistent vertical reference when laying out base cabinets, which in turn helps set predictable wall cabinet heights relative to the floor.
The Classic Series wall cabinet Brownstone Dartmouth 3036461 is 30 inches wide, 12 inches deep, and 18 inches high, which defines the wall space and vertical clearance it occupies in a run.
The cabinet fronts are made from 3/4 inch solid maple wood, giving a sturdy face frame and door material that handles daily use and aligns with other solid maple-front cabinets.
The cabinet rails are pocket drilled and assembled with 1 1/4 inch screws, producing tight joints that help maintain door alignment across the 30 inch width under normal kitchen loading.
The side panels and bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the cabinet front frame, creating a rigid box for wall mounting.
The web description states that shelves are not available, so the cabinet interior functions as a single open compartment across the full 30 inch width and 18 inch height.
The back is vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and bottom, creating a structural panel to carry wall fastener loads.
The Classic Series wall cabinet Brownstone Dartmouth at 30 inches wide, 12 inches deep, and 18 inches high provides a defined, open interior without shelves, supported by 3/4 inch solid maple fronts and 1/2 inch plywood box construction.
The combination of pocket-screwed rails, dadoed and stapled plywood panels, 3/4 inch corner blocks, and a structural vinyl-covered back panel supports stable wall mounting and regular door use across the 30 inch span.
The stated toe kick dimensions on standard cabinets in this line help coordinate base units with this wall cabinet, so runs stay visually aligned when planning a Classic Series Brownstone Dartmouth kitchen.
Sold In: 1 Each