Classic Series double oven cabinet describes this Wolf Home Products tall cabinet built as a 33 inch wide by 96 inch high Dartmouth Brownstone unit designed around a double oven opening. Two butt doors and one drawer give access to the cabinet storage, so installers get familiar access points when laying out appliance walls. Cabinet fronts are made from 3/4 inch solid maple wood, which provides a hardwood face for finish consistency across the Dartmouth Brownstone line in demanding kitchen environments. The cabinet belongs to the WOLF Home Products Classic Series from The Wolf Organization, LLC, aligning it with a defined product class when matching other pieces on the job. The 33 inch width and 96 inch height help it integrate into standard tall cabinet runs where double ovens are specified, keeping layout work predictable.
The 33 inch width and 96 inch height of this Classic Series double oven cabinet establish the footprint installers work with when planning appliance walls and tall runs. Side panels and bottom set in a 1/2 inch dado in the cabinet front frame create a square reference at the face, which is important when aligning neighboring cabinets and oven trim. Back panels stapled to the hang rail and cabinet bottom form a rigid plane behind the cavity, supporting secure anchoring to wall framing. The 4-1/2 inch high by 4-1/16 inch deep toekick dimension defines the front base line, which matters when tying into base shoe, floor transitions, or finished end panels along the run.
This Wolf Home Products Classic Series double oven cabinet, at 33 inches wide and 96 inches high, fits into tall cabinet runs where a double oven is planned within a Dartmouth Brownstone layout. Two butt doors above or below the oven area provide enclosed storage in the same vertical line as the appliance, which helps consolidate cooking equipment and related items. One drawer adds another storage zone in the tall cabinet, keeping small items within the same footprint as the oven cavity. Cabinet fronts made from 3/4 inch solid maple wood match other Dartmouth Brownstone maple-front units, supporting consistent appearance across adjoining tall and wall cabinets. The 4-1/2 inch high toekick keeps this tall cabinet aligned with standard Classic Series base cabinets along the floor line.
Rails that are pocket drilled and assembled with 1-1/4 inch screws create strong face-frame joints, which helps the door openings stay square when the cabinet is moved, set, and fastened. Side panels and bottom formed from 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado in the front frame, give the cabinet a fixed box geometry that resists twist as it is raised into position and tied into surrounding units. Back panels of vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and bottom, complete a boxed structure that supports both wall anchoring and the weight of a double oven installation around the cabinet cavity. All-wood 3/4 inch corner blocks at every corner tie major joints together, so lifting forces and appliance loads transfer through solid wood rather than single fastener points. The half-depth adjustable shelf of 3/4 inch plywood, with bull-nosed, foil-covered front edges and self-locking 1/4 inch diameter clips, gives a sturdy, adjustable storage surface that holds position while still allowing changes as the user organizes the tall cabinet space.
This Classic Series double oven cabinet is 33 inches wide by 96 inches high, so it occupies a full-height tall cabinet bay in a standard kitchen layout.
The cabinet fronts are 3/4 inch solid maple wood, while the side, bottom, and back panels use 1/2 inch plywood, giving a hardwood face with plywood box construction.
The rails are pocket drilled and assembled with 1-1/4 inch screws, producing a mechanically fastened frame that supports door alignment under handling and use.
The half-depth 3/4 inch plywood shelf uses self-locking 1/4 inch diameter clips on the sides, giving a secure yet adjustable support for stored items.
The toekick is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, matching the base line used across the Classic Series.
The back uses vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and bottom, creating a braced surface for fastening.
This Wolf Home Products Classic Series double oven cabinet, model 3036547, combines 3/4 inch solid maple Dartmouth Brownstone fronts with 33 inch by 96 inch tall dimensions for appliance wall layouts. Framed construction with pocket drilled rails, 1/2 inch plywood panels in dados, and 3/4 inch corner blocks establishes a rigid box ready for double oven integration. The half-depth adjustable 3/4 inch plywood shelf and self-locking clips add flexible storage around the oven cavity inside the same cabinet footprint. For projects built around the Classic Series look and construction details, this tall unit supplies the defined geometry and internal build needed for a coordinated double oven run.
Sold In: 1 Each