Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Classic Series Sink Base Cabinets from Wolf Home Products provide a dedicated base cabinet solution sized at 24 inches wide, 24 inches deep, and 34-1/2 inches high, which establishes a defined footprint for planning sink runs and aligning adjoining cabinets. The Dartmouth door style in a pewter finish sets a consistent visual frame for the sink area, which helps maintain a unified look across a row of Classic Series cabinets. Two butt doors on the front create a wide opening into the base, which improves reach during plumbing work and later access to shutoffs or cleaning supplies. A single false panel above the doors reserves space for typical sink bowls, which keeps the front rail intact while leaving room for common sink installations. All of these cabinet-front details work together to give installers a predictable sink base starting point.
The 24 inch width, 24 inch depth, and 34-1/2 inch height of this sink base cabinet set clear outer limits, which helps layout work when tying into adjacent cabinets and countertops. Two butt doors across the front deliver a single, broad access opening, which leaves room for traps, supply lines, and shutoffs without crowding. The false panel above the doors reserves frontal space for a sink while maintaining the face frame, which lets the sink bowl occupy the space behind without cutting into the door openings. The standard toekick height of 4-1/2 inches and depth of 4-1/16 inches establishes a predictable recess, which aids in aligning toe spaces along a full kitchen run.
The Classic Series Sink Base Cabinet in the Dartmouth door style and pewter finish provides a coordinated sink location when used with other Wolf Home Products cabinets, which helps maintain consistent door profiles and color across the kitchen. The face of the cabinet is built from 3/4 inch solid maple wood, which offers a sturdy front frame that supports the doors and any applied hardware through daily use. Two butt doors span the opening, which allows wide access when connecting the sink, waste lines, and supply shutoffs. The single false panel above the doors preserves a finished look across the upper front while leaving interior space available for a typical sink basin. Together, these front details allow installers to center the sink visually and physically within a 24 inch base footprint.
Rails that are pocket drilled and assembled with 1-1/4 inch screws create consistent face-frame joints, which support door alignment and help the front stay square after fastening the cabinet into place. Side panels and the bottom made from 1/2 inch plywood with matching exterior laminate are glued and stapled into a 1/2 inch dado in the front frame, which locks the panels into the face and improves resistance to twisting as the cabinet is leveled. Vinyl-covered 1/2 inch plywood back panels, glued and nailed into a 1/2 inch dado and stapled to the hang rail and bottom, add another plane of rigidity, which helps keep the cabinet box true when wall and floor surfaces vary. All-wood 3/4 inch corner blocks installed on all corners tie the frame and panels together at critical stress points, which supports the weight around the sink and counter area. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges sits on self-locking 1/4 inch diameter clips, which lets installers adjust or remove the shelf to route plumbing while still having a stable storage surface behind the pipes once the work is complete.
The Classic Series Sink Base Cabinet measures 24 inches wide, 24 inches deep, and 34-1/2 inches high, which sets its footprint for planning countertop lengths and aligning adjoining cabinets.
This sink base uses 3/4 inch solid maple wood for cabinet fronts and 1/2 inch plywood for sides, bottom, and back, which creates a rigid frame and carcass for daily kitchen use.
Rails are pocket drilled and assembled with 1-1/4 inch screws, while side, bottom, and back panels are glued and mechanically fastened in 1/2 inch dados, which helps keep the cabinet square during installation.
The cabinet uses a half-depth adjustable shelf made from 3/4 inch plywood with bull-nosed, foil-covered front edges, supported by self-locking 1/4 inch diameter clips, which balances plumbing clearance with storage space.
The 4-1/2 inch high by 4-1/16 inch deep toekick provides a consistent recess at floor level, which helps align toe spaces and finished panels along a continuous cabinet run.
The Dartmouth door style in a pewter finish sets the visual character of the sink base front, which supports a coordinated appearance when matched with other Wolf Home Products Classic Series cabinets.
The Classic Series Sink Base Cabinet from Wolf Home Products, measuring 24 inches wide, 24 inches deep, and 34-1/2 inches high, offers a defined, cabinet-grade base for locating a kitchen sink within a run. Its 3/4 inch solid maple cabinet fronts, pocket-drilled rails with 1-1/4 inch screws, and 1/2 inch plywood panels tied into 1/2 inch dados create a sturdy box that supports countertop and plumbing loads. With two butt doors, a false panel, a half-depth adjustable shelf, and a 4-1/2 inch by 4-1/16 inch toekick, this Dartmouth pewter sink base provides clear physical parameters for planning, leveling, and finishing your sink area.
Sold In: 1 Each