Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Rhapsody weathered nickel pull is a zinc die cast cabinet handle designed for cabinet and furniture doors or drawers where a 3-3/4 inch (95 mm) center to center layout is required, giving installers a straightforward match to standard drilling patterns. The Rhapsody collection identity ties this pull to a defined design family, which matters when coordinating hardware across multiple fronts on the same project. The finish is weathered nickel, providing a muted metal look that supports projects targeting a softer, aged nickel appearance. The pull has an overall length of 4-3/16 inches, so it spans slightly beyond the hole spacing for comfortable grip clearance without overwhelming narrower fronts. A projection of 1-1/4 inches sets the hand clearance from the fascia, allowing fingers to wrap behind the pull in typical cabinet applications. A width and base diameter of 3/8 inch define a relatively slim profile at the contact points.
This cabinet pull has a 3-3/4 inch (95 mm) center to center dimension, helping it align with common 96mm cabinet drilling patterns for straightforward installation on many doors and drawers. The 4-3/16 inch overall length gives a small margin beyond the hole spacing, supporting even reveals around the pull when laid out carefully along rails or drawer heads. A projection of 1-1/4 inches defines how far the pull extends from the surface, which matters where drawers pass adjacent fronts or trim. The pull width of 3/8 inch keeps the profile narrow, which can be useful when working close to panel edges or when space between adjacent pulls is limited. A base diameter of 3/8 inch identifies the footprint at each contact point, important when covering existing bore marks or layout traces on refinishing jobs.
This 96mm center to center pull suits cabinet or furniture fronts drilled at 3-3/4 inches on center, so it fits situations where that spacing is already established or specified. The zinc die cast construction supports applications requiring multiple pulls in kitchens, baths, or built-ins where consistent shape and dimensions matter across many units. The weathered nickel finish makes this pull suitable for projects targeting a softer metal tone, such as transitional or traditional cabinet lines that benefit from an aged nickel appearance rather than bright chrome. The 4-3/16 inch overall length positions the pull comfortably on standard drawer heads and door rails, giving enough span to feel substantial without overpowering mid-size faces. With a 3/8 inch width and 3/8 inch base diameter, the pull retains a lean footprint, which works well on narrower rails or smaller drawers where bulkier hardware could crowd the design.
The defined 3-3/4 inch (95 mm) center to center dimension allows installers to rely on standard jigs or templates designed around 96mm spacing, which helps repeat drilling layouts accurately from cabinet to cabinet. The 1-1/4 inch projection sets a predictable stand-off from the surface, supporting clearance planning when doors and drawers operate near adjacent panels or tall cabinet frames. A width of 3/8 inch and base diameter of 3/8 inch give precise edge references when aligning pulls to stile edges or drawer margins, which can reduce layout variation across a large run. The overall length of 4-3/16 inches offers a measurable endpoint when users line up pulls to panel features, such as panel grooves or rail intersections. The zinc die cast material and defined manufacturer part number 3045-1WN-P provide a consistent reference when ordering multiples for the same job or for future expansions.
This Berenson Rhapsody Series cabinet pull has a 3-3/4 inch (95 mm) center to center dimension, so it matches layouts drilled for 96mm spacing on cabinet doors and drawers.
The Berenson 3045-1WN-P handle has an overall length of 4-3/16 inches, giving slight overhang beyond the mounting holes for comfortable grip and balanced placement on faces.
This Rhapsody Series pull is zinc die cast with a weathered nickel finish, providing a cast metal body with a muted nickel appearance suited to softer metal color schemes.
The cabinet pull projects 1-1/4 inches from the mounting surface, giving finger clearance behind the pull while keeping it relatively close to the cabinet face.
The pull has a width of 3/8 inch and a base diameter of 3/8 inch, defining a slim profile and compact contact area against the door or drawer front.
This cabinet pull is specified with 8-32 x 1 inch screws, so the mounting interface matches standard threaded inserts or pilot holes tapped for that screw size.
The Berenson Rhapsody Series 3045-1WN-P cabinet pull combines a 3-3/4 inch (95 mm) center to center layout, 4-3/16 inch overall length, and 1-1/4 inch projection to support typical cabinet drilling and clearance needs. Zinc die cast construction and a weathered nickel finish align this pull with projects calling for consistent shape and a softened nickel tone across multiple fronts. With defined dimensions for width, base diameter, and screw size, this pull offers clear planning data for layouts and fastening on cabinet and furniture work. Use these verified measurements and finish details to align this 96mm center to center pull with your next cabinet, vanity, or built-in installation.
Sold In: 1 Each
