Amana 3/4 x 3-1/2 down shear flush trim plunge template router bit defines this cutter as a dedicated trim and template tool, so cabinetmakers and woodworkers can match parts to patterns with predictable, clean results. The 3/4 inch cutting diameter sets a clear reference against your template edge, which helps maintain consistent profiles across multiple workpieces. A 3-1/2 inch cutting length provides reach for thicker stock or stacked laminations, supporting taller trims or deeper pattern work in one controlled setup. The plunge-capable design allows the bit to enter the material away from an edge, which supports interior cutouts and pattern routing where no open edge is available. A 1/2 inch shank fits routers built for heavier bits, which supports smoother cuts when working longer lengths or denser stock in production or serious shop environments.
This Amana Tool router bit combines a 3/4 inch diameter, 3-1/2 inch cutting length, and 1/2 inch shank to support stable setups in production or serious shop use, so long templates and taller edges can be followed in a single pass where appropriate. The plunge-capable geometry allows the cut to begin directly into the panel, which is useful when routing to internal templates for openings or shaped cutouts. With the upper ball bearing guiding against a template mounted above the workpiece, the cutting edges follow the pattern line while the router stays supported, helping maintain alignment from start to finish on each part.
This Amana 3/4 x 3-1/2 down shear flush trim plunge template router bit with upper ball bearing is positioned for work where a template controls the final shape, such as routing components for cabinetry, fixtures, or repeated shop parts. The 3/4 inch cutting diameter tracks closely along the template edge, which helps keep profiles true when running both straight and gently curved patterns. A 3-1/2 inch cutting length supports routing along taller workpieces or layered materials, which can help consolidate steps when shaping thicker parts. The down shear action directs the cut force into the workpiece face, which supports a controlled trimming pass that follows the template without pulling fibers upward along the cut path.
The template router bit with upper ball bearing uses that bearing as the contact point with the template, which keeps the cutting edges consistently offset by the 3/4 inch diameter for every pass. This arrangement supports repeatable sizing across multiple parts because the template, not the operator, defines the finished width. With a 2-flute layout, the bit presents alternating cutting edges that share the workload, which supports a smoother feel through the cut and helps maintain surface quality suitable for subsequent assembly or finishing. The 1/2 inch shank anchors the bit firmly in routers built for that size, which supports stable rotation when using the full 3-1/2 inch cutting length along an edge or pattern. Together, these details give installers and shop users a defined geometry that can be relied on whenever the same template is used again.
The Amana 3/4 x 3-1/2 down shear flush trim plunge template router bit is a trim and template router bit, so it is used to follow patterns and produce matching shapes.
The upper ball bearing on this router bit runs against a template above the workpiece, so the bearing sets the path and the cutting edges follow that line for consistent trimming.
The 3-1/2 inch cutting length gives reach for taller edges or layered materials, so a single setup can trim deeper sections along a template without changing bits mid-process.
The 1/2 inch shank fits routers designed for larger bits, so it supports stable rotation and helps control vibration when using the full cutting length for template routing.
The down shear action directs cutting force into the surface, so the bit supports controlled trimming along the template edge during pattern work on faces.
The 2-flute configuration provides two cutting edges sharing the load, so the bit balances feed rate and cut smoothness during flush trim and template operations.
The Amana 3/4 x 3-1/2 down shear flush trim plunge template router bit with upper ball bearing, 2-flute, 1/2 shank brings together defined dimensions and a guided bearing layout for pattern work. When a job calls for repeated parts built from a reliable template, its 3/4 inch cutting diameter, 3-1/2 inch cutting length, and 1/2 inch shank offer a known geometry for routing. Sourcing this Amana Tool router bit through Wurth Baer Supply connects that capability with a distributor focused on the woodworking trade.
Sold In: 1 Each