Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amana 1/2 x 2-3/4 Flush Trim Bit is a router bit designed for trimming material flush to a template or substrate, so installers and woodworkers can match edges cleanly across cabinet parts, doors, or laminate work. The 1/2 inch cutting diameter defines the trim width in a single pass, which helps keep edges consistent across multiple identical parts. A 2-3/4 inch cutting length provides extended reach along taller edges or stacked materials, which supports full-height trimming without stepping the cut. The 2-flute configuration means the bit cuts with two cutting edges, which distributes the load as it moves through the workpiece. A 1/4 inch shank fits routers that accept 1/4 inch shank router bits, allowing this bit to slot into compact or mid-size router setups that many shops already run. The bit is part of the Amana Tool router bits line, giving buyers a specific Manufacturer Part Number, 47117, for reorder and matching.
This Amana 1/2 x 2-3/4 Flush Trim Bit uses a 1/4 inch shank, so it fits router collets sized for 1/4 inch shank router bits, aligning with many laminate trimmers and lighter routers in cabinet shops. With a 1/2 inch cutting diameter, the bit defines a clear cutting circle around the shank, which helps operators plan offset between bearing and cutting edge when configuring guides or fences. The 2-3/4 inch cutting length gives extra reach along the edge of the workpiece, which supports trimming deeper panels or layered assemblies without swapping bits mid-process. As part of the Amana Tool router bits category, this trim bit integrates into tooling sets already built around Amana profiles, helping shops standardize profiles and trim geometry under one manufacturer line.
This bit sits in the Bits, Blades and Cutters category under Trim Bits, which places it squarely in trimming and pattern-following work for woodworking and cabinet construction. The Amana 1/2 x 2-3/4 Flush Trim Bit acts as a router bit for template and pattern operations where a 1/2 inch cutting diameter is appropriate, such as shaping door parts, cabinet panels, or laminate edges to match a master profile. Its 2-3/4 inch cutting length lets the bit engage the full height of many common panel and component edges in one pass, which supports efficient flush trimming along the entire edge rather than segmenting the cut. The 1/4 inch shank means the bit integrates with routers and trimmers that accept 1/4 inch shank bits, tying into compact setups often used on site or at the bench.
The defined 1/2 inch cutting diameter on this flush trim bit helps produce repeatable edge sizing, because each pass removes material to the same radial distance from the shank. The 2-3/4 inch cutting length offers working depth that can cover many standard panel thicknesses, which reduces the need to reset height between passes on the same job. Having two flutes on the cutting body means material removal is shared between these two cutting edges, which spreads cutting forces as the bit advances through wood or sheet goods. The 1/4 inch shank connects this geometry solidly to routers designed around 1/4 inch shank tooling, supporting stable collet engagement when the bit is installed. Listed as Amana Tool Manufacturer Part Number 47117, the bit can be referenced directly when matching spares to an existing successful trim setup in the shop.
The Amana Tool 47117 is a flush trim router bit in the Trim Bits category, so it serves trimming and pattern-following work where edges need to match a guide or substrate.
The Amana 1/2 x 2-3/4 Flush Trim Bit has a 1/2 inch cutting diameter and a 2-3/4 inch cutting length, which defines both the trim width and the usable edge reach in one tool.
The Amana 1/2 x 2-3/4 Flush Trim Bit uses a 1/4 inch shank, so it fits routers and laminate trimmers that accept 1/4 inch shank router bits in their collets.
The 2-flute configuration on this router bit provides two cutting edges, which share material removal as the bit travels through the cut during trimming operations.
The 2-3/4 inch cutting length lets the bit engage deeper or taller edges, supporting single-pass trimming across many panels and helping reduce router bit changeovers.
Manufacturer Part Number 47117 uniquely identifies this Amana flush trim bit, which simplifies reordering the same size and style once it has been proven in the shop.
The Amana 1/2 x 2-3/4 Flush Trim Bit, with 1/2 inch cutting diameter, 2-3/4 inch cutting length, and 1/4 inch shank, offers a defined geometry for template and edge trimming tasks. As an Amana Tool router bit in the Trim Bits class, it ties into a recognized router bit family that many woodworking operations already use. Referencing Amana Tool 47117 by part number connects directly to this specific flush trim configuration when ordering through Wurth Baer Supply, helping align future jobs to a proven trimming setup.
Sold In: 1 Each