Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rhapsody pull 128mm center to center gives a straightforward way to finish cabinet and drawer fronts where a 5-1/16 inch bore pattern is already laid out, so layouts on new work or replacements stay consistent across a run. The pull is part of the Berenson Rhapsody collection, tying into that series when matching existing hardware across a job. Its weathered iron finish presents a worn, darkened metal look that suits projects calling for a traditional or rustic appearance without additional finishing steps. The pull body is zinc die cast, providing a stable, molded shape that keeps the profile uniform from unit to unit. Overall length of 5-7/16 inches gives a little material beyond the hole centers, which helps cover minor drilling chatter at each end of the handle. A projection of 1-1/4 inches creates finger clearance in front of the cabinet face while keeping the handle close to the door surface.
The 5-1/16 inch (128 mm) center to center drilling dimension lets the Berenson Rhapsody pull drop onto standard metric or imperial jigs intended for that spacing, so there is no need to alter hole locations when swapping similar handles. Thread sizing of 8-32 x 1 inch ties directly to a common cabinet hardware screw spec, which simplifies matching to pre-tapped inserts or standard pilot holes in typical door and drawer materials. With a projection of 1-1/4 inches and a width of 3/8 inch, the pull creates a defined grip zone that keeps fingers clear of the door face while avoiding an oversized feel on smaller fronts. Base dimensions of 3/8 inch provide a compact contact patch at each end, which is useful when working near panel edges or narrow rails.
This Berenson Rhapsody series pull is built around a 5-1/16 inch (128 mm) center to center drilling, so it fits doors and drawers already bored at that spacing in kitchens, baths, or shop-built casework. The overall 5-7/16 inch length works well on medium drawer fronts and standard cabinet doors, giving enough span for a solid grip without overpowering the panel. Its weathered iron finish pairs naturally with face frames and panels that lean toward traditional, rustic, or industrial styling where a darker metal tone is preferred. Because the pull is part of the Rhapsody collection, it supports jobs where multiple sizes or complementary pieces from the same series are used to maintain a consistent look across uppers, lowers, and tall units.
The zinc die cast material of this pull provides a molded construction that keeps hole spacing, profile, and base alignment consistent from piece to piece, which saves time when aligning handles across long cabinet runs. A 5-1/16 inch (128 mm) center to center specification allows installers to rely on one drilling setup for all matching pulls on the project, reducing layout changes between doors and drawers. The 1-1/4 inch projection is sized to create finger clearance while still letting doors open without the handle snagging nearby fronts when cabinets are closely ganged. With a 3/8 inch width, the pull offers a defined gripping edge without adding bulk near the door edge, which can help doors swing past adjacent surfaces. Base dimensions of 3/8 inch concentrate contact at the mounting points, which helps pulls sit flat on the face when holes are drilled square. The 8-32 x 1 inch screw size corresponds to a standard thread used in cabinet hardware, so installers can match drilling depth to a familiar fastener length across doors and drawers of similar thickness.
The Berenson Rhapsody pull uses a 5-1/16 inch (128 mm) center to center drilling, which suits cabinets and drawers set up for that common handle spacing.
The Rhapsody weathered iron pull has an overall length of 5-7/16 inches, giving coverage beyond the hole spacing for a balanced look on typical cabinet fronts.
The 3041-1LWI-P Rhapsody pull has a 1-1/4 inch projection, creating a defined gap between the pull and the door face for hand clearance.
This cabinet handle is zinc die cast with a weathered iron finish, giving a molded metal body with a darker, aged metal appearance.
This Rhapsody series pull is specified with an 8-32 x 1 inch screw size, matching a common cabinet hardware thread standard.
The Berenson pull has a 3/8 inch width and 3/8 inch base dimensions, giving a slim grip profile and compact mounting contact points.
The Berenson Rhapsody series 5-1/16 inch (128 mm) center to center weathered iron pull brings a defined 5-7/16 inch overall length, 1-1/4 inch projection, and 3/8 inch width to cabinet and drawer work. Zinc die cast construction and 8-32 x 1 inch screw sizing align with standard cabinet hardware practices, so this handle fits smoothly into typical drilling and mounting routines. When a project calls for a weathered iron look across matching Rhapsody collection pieces, this pull provides consistent dimensions and finish for coordinated installations.
Sold In: 1 Each
