Amana flush trim plunge template bit describes the Amana Tool 3/8 inch x 2 inch Flush Trim Plunge Template router bit with upper ball bearing, designed for template-guided trimming where the bearing rides a pattern so the cutting edges follow accurately. The 3/8 inch diameter cutting profile lets the bit get into tighter template curves and details than larger diameters, which helps when working on smaller pattern designs or restricted areas. The 2 inch cutting length provides extended reach along taller edges, so more material height can be trimmed in one pass when the setup and material allow. The upper ball bearing guides from above the cutting edge, so the bearing can follow a template sitting on top of the workpiece during routing. The 2-flute cutting design means two cutting edges share the cut, which helps balance the cut as the bit rotates. The 1/4 inch shank interfaces with routers and collets designed for that shank size, keeping the bit matched to common 1/4 inch shank router setups.
The Amana Tool 3/8 inch x 2 inch Flush Trim Plunge Template router bit uses its 3/8 inch diameter as the controlling cut width, so any router setup or jig that references the bit diameter can be based on that known size for edge trimming. The 2 inch cutting length provides a defined working height along the edge of the material, so template routing situations can be planned around that depth of trim in multi-pass or single-pass operations. The upper ball bearing is positioned above the cutting portion of the bit, so templates can be located on the face of the workpiece where the bearing travels along the template edge while the flutes trim the work below it. The 1/4 inch shank size ties the bit to routers that accept 1/4 inch shank tooling, so shop routing stations built with 1/4 inch collets can integrate this bit into their existing router bit group.
The Amana 3/8 inch x 2 inch Flush Trim Plunge Template router bit with upper ball bearing fits template-based trimming tasks where a pattern defines the final edge shape. The 3/8 inch diameter allows the bit to follow patterns that contain moderate inside curves, so the router can trace those shapes while keeping a consistent cut width defined by that diameter. With 2 inches of cutting length, the bit can engage material along a taller edge, which suits routing operations on thicker panels or parts when the trim height must stay within that 2 inch working length. The bearing located above the cutting flutes lets the pattern sit on top of the workpiece while the bearing follows it, which fits workflows where templates are fastened to the face side and the router moves over the template to transfer the shape to the material. The 1/4 inch shank supports routers configured for 1/4 inch shank bits, so this tool can be part of a trim and template routing set built around that shank size.
The Amana Tool branding and Manufacturer Part # 45475 identify this bit precisely, which supports repeat ordering when a shop wants identical trim results across multiple jobs using the same 3/8 inch diameter and 2 inch cutting length. The 2-flute layout provides two cutting edges that alternately engage the work as the router spins, which stabilizes how the bit removes material at the specified diameter and cutting length. The upper ball bearing defines the reference point between the pattern and the cut, so once a template is aligned, the bearing-to-flute relationship keeps the trim path consistent along the entire edge. The 3/8 inch x 2 inch size pairing gives a predictable footprint for edge trimming around templates, which simplifies designing jigs and patterns that assume that particular cutting geometry. The 1/4 inch shank ties the bit into router setups based around that shank standard, which supports consistent chucking depth and collet selection whenever this bit is used in a routing workflow.
The Amana 45475 is a 3/8 inch x 2 inch Flush Trim Plunge Template router bit with upper ball bearing and 2 flutes, so it is built for template-guided trimming with a bearing reference above the cutting edges.
The 3/8 inch diameter sets the width of the cut during routing, so any template, jig spacing, or clearance planning that depends on bit size can be based on that 3/8 inch cutting profile.
The 2 inch cutting length gives the router bit extended reach along the edge, so trimming can cover taller workpiece edges within that 2 inch working height during template-guided routing.
The upper ball bearing sits above the cutting flutes, so it can follow a template placed on top of the workpiece while the cutting edges below duplicate the template profile into the material.
The 1/4 inch shank means this router bit fits router collets designed for 1/4 inch shank tools, so it integrates into routing setups built around that shank standard in the shop.
The 2 flutes provide two cutting edges on the bit, so material removal is shared between the flutes as the router spins, helping maintain balanced cutting along the template-guided trim path.
The Amana 3/8 inch x 2 inch Flush Trim Plunge Template router bit with upper ball bearing combines a 3/8 inch cutting diameter, 2 inch cutting length, 2-flute layout, and 1/4 inch shank into one template-routing tool. Those specific dimensions and features let routing setups be built around its known size and bearing position, simplifying how templates are designed and how trims are repeated from job to job. For shops and serious woodworkers who route with patterns using 1/4 inch shank tooling, the defined geometry and Amana Tool 45475 identity provide a consistent reference when selecting a flush trim plunge template bit for edge work.
Sold In: 1 Each