
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amana 10 inch melamine saw blade identifies this blade as a 10 inch circular saw option sized for typical table and panel saw setups, so it slots naturally into many shop workflows built around that blade diameter. The 80 teeth configuration on this circular saw blade points toward fine-tooth cutting, which supports smoother passes when you are working on melamine sheet goods that show defects quickly. The double-face melamine wording signals that the blade is intended to address both faces of melamine panels, so you can approach cuts without favoring a single good side. Being in the melamine category highlights its role in working specifically with melamine materials rather than general framing lumber, which steers it toward cabinet and casework production. The Amana Tool branding on this circular saw blade gives you a clear manufacturer reference, which simplifies matching it with shop standards or existing tooling records.
The 10 inch blade size sets the basic geometry of this Amana Tool circular saw blade, so you can relate it directly to your saws rated for 10 inch blades during installation and job planning. The 30mm bore is the central mounting dimension on this blade, so it indicates direct fit with arbors machined to a 30mm diameter standard common on certain saw types. With 80 teeth distributed around the 10 inch rim, the tooth pitch stays relatively tight, which affects how the blade tracks through melamine sheet cuts where clean edges matter. The circular saw blades classification further signals that mounting is intended on circular saw arbors, guiding you toward saw types whose guards, flanges, and brakes are constructed for this category of blade.
This Amana 10 inch melamine saw blade sits in the melamine category, positioning it for work on melamine panels that often appear in cabinets, shelving, and similar assemblies. The double-face melamine wording ties the blade to applications where both faces of the sheet carry a finished surface, common in carcass parts and partition panels. Within the broader bits, blades and cutters group, it occupies the circular saw blades class, so it is oriented toward table and panel saw style machines rather than handheld cutting tools that use different blade interfaces. The 10 inch size aligns it with saws built around that diameter, so you can integrate it into operations that already stage 10 inch blades for panel breakdown or finish sizing. The Amana Tool brand detail supports shops that track tooling by manufacturer when standardizing their setups.
The 80 teeth layout on this blade provides many cutting edges per revolution, which contributes to controlled entry and exit on melamine surfaces where edge quality can influence rework needs. Its double-face melamine designation means the blade is oriented toward cuts that respect both top and bottom faces, helping panel parts leave the saw with consistent edges on each side. The 30mm bore concentrates the mounting force on an arbor size used in certain saw formats, which supports consistent seating on compatible spindles and stable rotation during repetitive cuts. Identifying the blade as Amana MB10800-30 gives you a precise manufacturer part reference, simplifying reordering when a specific cut quality or setup has been dialed in around this blade. Together, the 10 inch diameter and 80 tooth count help define cutting behavior so you can plan feed rates and job routing with predictable results.
The Amana 10 inch melamine saw blade is categorized specifically for melamine, aligning it with cutting tasks on melamine sheet goods used in cabinets and similar projects.
The 10 inch diameter identifies this as a 10 inch circular saw blade, matching saws built around that blade size for proper guard coverage and cutting geometry.
The 80 teeth on this blade create a fine-tooth profile, supporting smoother cutting passes on melamine where visible edge chipping would affect finished surfaces.
The 30mm bore is the arbor hole diameter, so it fits saws that use a 30mm spindle, helping the blade seat properly on that arbor standard.
The double-face melamine designation ties this blade to panels finished on both faces, supporting cuts where both sides of the part will remain visible.
The MB10800-30 identifier is the Amana Tool manufacturer part number, giving you a precise reference when matching, restocking, or documenting this specific blade.
This Amana 10 inch melamine saw blade combines a 10 inch diameter, 80 tooth configuration, and 30mm bore to target melamine panel work on circular saw equipment. The double-face melamine designation aligns it with projects where both faces of the sheet will stay visible in cabinets or casework. The MB10800-30 part number and Amana Tool branding give shops a clear reference when standardizing or repeating setups around this blade. For melamine-focused cutting on saws built for a 10 inch blade and 30mm arbor, this circular saw blade offers a defined, documented option.
Sold In: 1 Each