Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tensorgrip P390 non-flam contact adhesive is a Quin Global canister adhesive formulated as a completely non-flammable, methylene chloride free contact adhesive, so it supports jobs where fire risk and solvent selection are critical on site or in the shop. This Tensorgrip QGAP390 canister adhesive uses ZERO-FLAM Technology, described as a unique propellant system of non-flammable gases, which delivers a 100% non-flammable adhesive that removes the risk of a catastrophic fire during application and use near ignition sources. As a contact adhesive in the Adhesives and Caulks and Bulk Contact Adhesives category, it is built for large-area bonding where consistent spray patterns and quick production pacing matter to installers and fabricators.
This Quin Global contact adhesive is identified as a contact adhesive in a 22 liter canister, so it is oriented toward spray-style bulk contact work where installers cover larger surfaces without frequent changeouts. Its high heat resistance means the bond line is intended to tolerate higher temperatures once cured, which is important when substrates are exposed to heat from processes, equipment, or sunlight. The efficient 100% adhesive transfer to the substrate described in the web information indicates that the adhesive is designed to leave the canister and deposit fully on the work surface, supporting predictable open time and bond strength development during installation.
The web description states that Tensorgrip QGAP390 canister adhesive offers an excellent bond to unsanded melamine, so fabricators can laminate or assemble melamine components without a separate sanding operation, which streamlines cabinet or casework production. Its excellent bond to difficult-to-bond foams means it is intended for applications where traditional adhesives struggle with foam surfaces, so foam components can be secured without swapping to specialty chemistries mid-project. The product is also described as polystyrene compatible when applying a light coat, which means that, under light application, it is suited to bonds on polystyrene sheets or shapes where substrate sensitivity is a concern. Together, these substrate references show that the adhesive targets mixed-material assemblies where melamine, foams, and polystyrene meet, so installers can rely on a single contact adhesive across those materials.
The description explains that Tensorgrip P390 is completely non-flammable and methylene chloride free, so it addresses fire risk and solvent content concerns that often drive jobsite or shop policies. Its ZERO-FLAM Technology, using a unique propellant system of non-flammable gases, results in a 100% non-flammable adhesive that eliminates the risk of a catastrophic fire, which directly impacts how safely crews can operate around ignition sources and hot tools. The stated advantage of a non-flammable adhesive contributing to lower insurance premiums ties the chemistry to overhead cost management, which matters for shops looking at long-term operating expenses. High heat resistance further supports this by aiming to keep assemblies intact when exposed to elevated temperatures, so bonded joints are intended to stay stable in warm service environments. With efficient 100% adhesive transfer to the substrate, the product is also positioned to reduce material waste and support predictable coverage rates, which is valuable when planning adhesive usage and labor on repetitive production runs.
Tensorgrip P390 is described as a contact adhesive in the Adhesives and Caulks and Bulk Contact Adhesives category, so it is intended for contact bonding applications on suitable substrates.
The adhesive is described as completely non-flammable and 100% non-flammable, so it is intended to remove catastrophic fire risk during application and use around potential ignition sources.
The SAP description and web description identify this P390-22 version as a 22 liter size with a clear color, so it suits larger projects where a clear adhesive line is preferred.
Tensorgrip QGAP390 is described as providing an excellent bond to unsanded melamine, so it targets melamine bonding without requiring a sanding step beforehand.
The web description states it offers an excellent bond to difficult-to-bond foams and is polystyrene compatible when applying a light coat, so it addresses those materials in appropriate applications.
The adhesive is described as having high heat resistance, so bonded assemblies are intended to tolerate elevated temperatures during normal service without compromising the contact bond line.
Tensorgrip P390 non-flam contact adhesive in the 22 liter clear P390-22 canister gives installers a completely non-flammable, methylene chloride free contact adhesive with high heat resistance and efficient 100% adhesive transfer, so large projects balance safety, bond performance, and material usage. At Wurth Baer Supply, this Quin Global contact adhesive sits in the Bulk Contact Adhesives range, tying directly into workflows bonding unsanded melamine, difficult foams, and polystyrene under the described conditions. Select this Tensorgrip QGAP390 canister adhesive when a clear, non-flammable contact adhesive profile supports your assembly and lamination work.
Sold In: 1 Each