Tensorgrip P390 non-flam contact adhesive is a Quin Global contact adhesive designed as a 100% non-flammable adhesive, so it supports work in environments where ignition risk must be minimized during cabinet or panel fabrication. The canister adhesive uses ZERO-FLAM Technology, described as a unique propellant system of non-flammable gases, meaning the propellant and adhesive system are engineered to remove flammable components from the setup. This non-flammable adhesive characteristic reduces fire risk at the point of application, which matters when spraying larger surface areas or working around ignition sources. The adhesive is methylene chloride free, so it avoids that specific solvent while still functioning as a contact adhesive for production use. The product is identified as Tensorgrip QGAP390 in the web description and as P390B-22 in the manufacturer part number, which helps tie purchasing to job specifications and inventory tracking.
The product is described as a canister adhesive, so it is intended to be dispensed from a pressurized container for spraying onto substrates in fabrication workflows. Efficient 100% adhesive transfer to the substrate means material delivered from the canister is directed onto panels or components, supporting predictable coverage patterns during installation steps. The adhesive is polystyrene compatible when applying a light coat, so light application on polystyrene surfaces is part of its intended use window. High heat resistance supports bonds in areas where installed pieces experience temperature changes after assembly, such as casework near equipment or fixtures. The 22 liter size provides a bulk format, which aligns with extended spraying and larger production runs where frequent container changes would interrupt workflow.
The Tensorgrip QGAP390 canister adhesive is identified as a contact adhesive, so it is suited to bonding surfaces that are joined after adhesive is applied and allowed to flash as specified in contact adhesive workflows. The web description states it provides excellent bond to unsanded melamine, so it supports casework or cabinet jobs where melamine-faced boards are not sanded before bonding. It also specifies excellent bond to difficult-to-bond foams, so shop tasks involving foam components can rely on this product for adhesion in those areas. The adhesive is listed as polystyrene compatible when applying a light coat, indicating that light-application bonding on polystyrene components is part of its described use. The color is listed as blue, so sprayed areas can be visually distinguished on substrates, which helps follow coverage across board edges and faces.
The product is described as completely non-flammable and formulated with ZERO-FLAM Technology using a unique propellant system of non-flammable gases, so both the adhesive and its delivery system are designed around reduced flammability during normal application. The web description notes that non-flammable adhesive can contribute to lower insurance premiums, linking the non-flammable property directly to potential cost advantages for operations. Being methylene chloride free defines a specific solvent that is intentionally absent from the formulation, which matters where internal policies or local rules limit methylene chloride products in fabrication areas. High heat resistance is highlighted as an advantage, so bonded assemblies can handle elevated temperatures encountered in typical cabinet, countertop, or fixture environments without immediate bond degradation. Efficient 100% adhesive transfer to the substrate supports consistent laydown from the canister, which helps produce uniform bond lines and reduces variation from missed areas on workpieces.
Tensorgrip P390B-22 is a Quin Global contact adhesive supplied as a canister adhesive, so it is used for contact-style bonding of substrates in fabrication workflows.
The adhesive uses ZERO-FLAM Technology with non-flammable gases, so application reduces ignition risk and is described as supporting lower insurance premiums for operations.
This Tensorgrip contact adhesive is described as completely non-flammable and methylene chloride free, so it avoids methylene chloride while delivering contact bonding performance.
High heat resistance matters where bonded components experience elevated temperatures in normal cabinet, countertop, or fixture environments after installation.
Tensorgrip QGAP390 is stated to provide excellent bond to unsanded melamine, so it suits cabinet and casework projects using melamine-faced panels without sanding.
The adhesive is described as polystyrene compatible when applying a light coat and offering excellent bond to difficult-to-bond foams, so it addresses those substrates in fabrication.
The Tensorgrip P390 non-flam contact adhesive brings together a 100% non-flammable, methylene chloride free formulation with ZERO-FLAM Technology, which directly supports fire risk reduction and compliance-driven workflows in cabinetry and fabrication. Its high heat resistance, efficient 100% adhesive transfer to the substrate, and excellent bond to unsanded melamine, difficult-to-bond foams, and polystyrene with a light coat position it for demanding shop or site applications. The 22 liter blue canister format aligns with bulk use where consistent spraying and clear visual coverage matter across multiple panels or assemblies. For projects needing a non-flammable contact adhesive that targets these listed substrates and conditions, this P390B-22 variant from Quin Global is structured to fit directly into production work.
Sold In: 1 Each