Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Sugatsune SNB Series pull is an L-profile edge pull for cabinet doors and drawer fronts where a standard bar pull would overscale the front or conflict with an adjacent surface.
A 1-13/16 inch center-to-center pull serves a specific job: fronts that are too narrow for a 3 inch bar pull but still need a comfortable grip. Upper cabinet doors on a 9-inch or 12-inch base, appliance garage doors, and slender drawer fronts on furniture-style islands all reach this situation. The 46 mm hole pattern also suits replacement projects where the existing drilling is set close together and a wider pull would leave the old holes exposed at both ends. Because the mounting centers are already compact, the 2-3/4 inch overall length covers the hardware cleanly without pushing into adjacent hardware or hinge hardware on a narrow stile.
The Material Type attribute on this pull confirms solid brass construction, which is uncommon in a segment where zinc is the dominant substrate. Brass carries more weight in the hand than zinc, and the surface takes a finer brushed texture, which is exactly what the Satin Brass finish delivers: a warm gold tone with a low sheen that does not pick up glare under cabinet lighting. The brushed surface also softens the L-profile's geometry, so the pull reads as a refined detail against a painted or wood-veneer front rather than as a hard industrial edge.
This pull is a natural fit for designers and cabinet shops specifying hardware on narrow-stile frameless cabinets, inset door programs, or furniture pieces where the hardware envelope is tight. The L-profile sits at the edge plane rather than projecting forward from the center of the front, which keeps it out of the swing path on doors that open into a confined space. It is equally at home on a high-end residential kitchen running a warm-metal hardware theme and on a commercial millwork project where the hardware spec calls for a solid-brass piece. The SNB Series offers companion pulls in other center-to-center spacings, so a single hardware language can run across a mix of front widths in the same installation.
Either. The two-hole mounting pattern works on both frameless and face-frame door and drawer fronts; the determining factor is whether the 1-13/16 inch center-to-center spacing matches your drilling or your door's stile width.
A bar pull mounts flush against the face of the front and projects straight out. An L-profile pull presents one leg along the face and the grip portion at an angle, which positions the hand differently and keeps the overall hardware profile tighter on a narrow front.
No. Satin Brass has a brushed, low-sheen surface rather than a high-gloss polish. The gold tone is the same family, but the texture is softer and less reflective.
Yes. The SNB Series is a family of pulls in the same profile and finish, so different center-to-center spacings from the same series coordinate visually across a mixed installation.
When the front is narrow and the hardware needs to fit without competing with adjacent elements, the 46 mm center-to-center spacing and L-profile of this Satin Brass pull deliver a precise, refined solution.
Sold In: 1 Each
