Pro Value ZZ Series satin brass pull identifies this handle as part of the ZZ Series line in a satin brass finish, giving cabinets or furniture a coordinated look wherever that specific collection is used. The pull is a 3 inch (76 mm) center to center design, so the mounting hole spacing is set up for standard 3 inch layouts often found on doors and drawers. Solid brass material provides a substantial feel in the hand, which helps when opening heavier fronts. The satin brass finish keeps the look uniform across the visible surface, supporting consistent appearance on banks of doors. Overall length of 3-5/16 inches means the pull extends slightly beyond the mounting centers, offering finger clearance at both ends. A projection of 1-1/4 inches spaces the hand away from the door face, which supports comfortable gripping in daily use.
The 3 inch center to center mounting layout aligns the Pro Value Series pull with common boring patterns, which helps when replacing existing handles drilled to that spacing. The 8-32 x 1 inch screw size specification matches a familiar thread and length in cabinet hardware, so installers can set up drilling depth and pilot sizing around a known fastener standard. With a 3-5/16 inch overall length and 5/16 inch width, the handle seats neatly on standard face frames or slab fronts, leaving space around the pull for finishes or edge profiles. The 1-1/4 inch projection works with these dimensions to keep the grip point balanced over the mounting screws, which supports even loading when doors and drawers are pulled open.
The Pro Value Series STEELWP3-SB satin brass pull fits projects that call for a 3 inch center to center handle, since its mounting holes are set exactly to that spacing. At 3-5/16 inches overall length, the pull suits both single cabinet doors and medium-width drawers without visually crowding the panel. The 5/16 inch width keeps the handle from overpowering narrow stiles, which is useful on face frames or small utility cabinets. Its satin brass finish ties in with other satin brass elements in the same space, creating a coordinated hardware look across banks of doors and drawer stacks. Solid brass material supports use on frequently operated cabinets because each pull presents the same solid touch point across the run.
The 3 inch (76 mm) center to center dimension on this ZZ Series satin brass pull makes layout straightforward, because installers can use standard 3 inch drilling jigs or existing holes aligned to that measurement. Its 3-5/16 inch length gives a small but useful tolerance beyond the centers, which helps cover minor chipping at the hole edges during retrofit work. The 1-1/4 inch projection and 5/16 inch width combine to create a stable footprint against the door or drawer surface, helping the pull sit flat once fastened. The specified 8-32 x 1 inch screw size means the threaded connection follows a familiar cabinet hardware standard, which aids in achieving consistent clamping force across multiple fronts. Together, these dimensions and specs support repeatable positioning and appearance along cabinet runs.
The Pro Value ZZ Series satin brass pull has 3 inch center to center spacing, a 3-5/16 inch overall length, 1-1/4 inch projection, and 5/16 inch width, helping size it correctly on cabinet doors and drawers.
The 3 inch center to center spacing matches a standard mounting layout, letting the pull align with existing 3 inch holes or standard drilling jigs on many cabinet projects.
The Pro Value ZZ Series pull is made from solid brass, giving a substantial feel when operated on frequently used doors and drawers.
The STEELWP3-SB satin brass pull projects 1-1/4 inches from the surface, providing finger and knuckle clearance when gripping doors and drawers.
This cabinet pull uses an 8-32 x 1 inch screw size, which aligns with a common cabinet hardware thread and length for fastening into door and drawer fronts.
The satin brass finish gives the pull a consistent brass tone with a softer sheen, supporting a uniform look across matching cabinet hardware runs.
The Pro Value ZZ Series 3 inch center to center satin brass pull brings solid brass construction, a satin brass finish, and a 3-5/16 inch overall length together in one handle, matching projects laid out for 3 inch spacing. With 1-1/4 inch projection and 5/16 inch width, the STEELWP3-SB pull balances clearance and footprint on doors and drawers. For work calling for a satin brass look and standard 3 inch mounting, this Pro Value Series cabinet pull offers a consistent set of dimensions and finish for coordinated installations.