Berenson Tailored Traditional pull Verona Bronze 160 mm

Berenson Tailored Traditional Pull For Cabinets

Berenson Tailored Traditional pull is a 6-5/16 inch (160 mm) center to center cabinet pull designed for projects that call for an exact handle spread. The pull comes from the Tailored Traditional Series by Berenson Corporation, so it matches jobs that specify this collection across a run of doors and drawers. Its Verona Bronze finish provides a defined, consistent appearance that helps maintain visual continuity on face frames or full-overlay fronts. The pull is made from solid brass, which gives the handle a substantial feel when opening heavier cabinet fronts and supports repeated daily use. With a total length of 7 inches, the pull visually spans a wider section of the stile or drawer front, helping proportion hardware on medium-width fronts. This pull is part of the Handles and Pulls category at Wurth Baer Supply, aligning it with other decorative cabinet hardware used in woodworking projects.

Key Details Of This Verona Bronze Cabinet Pull

• The center to center dimension is 6-5/16 inches (160 mm), so drilling layouts can be set accurately for consistent handle spacing along cabinet runs and matched to existing 160 mm boring patterns.
• The pull length is 7 inches, giving extra grip area across the hand, which helps when operating wider drawers or taller doors where leverage and accessible grasp matter.
• The projection is 11/16 inch, so the handle stands off the surface enough for fingers to pull the door while keeping hardware closer to the face for a tighter cabinet profile.
• The width is 1-3/8 inches, giving a broader contact surface that supports a comfortable grip and creates a defined visual band on rails, stiles, or drawer heads.
• The Verona Bronze finish coordinates with other Verona Bronze components in the Tailored Traditional collection, helping maintain a unified look across all cabinet fronts on the project.
• The material is solid brass, providing a dense, sturdy handle body that supports repeated use on frequently opened cabinet doors and drawers.

Mounting Dimensions And Pull Fit On Fronts

This Tailored Traditional Series cabinet pull has a center to center measurement of 6-5/16 inches, so boring can be laid out for 160 mm spacing across doors and drawers. That fixed spread supports both new cabinet construction and replacements where existing 160 mm holes already exist. With a 7 inch overall length, the pull extends slightly past the mounting points, which positions the hand grip toward the center of the front for better leverage. The 11/16 inch projection sets the handle out from the cabinet face far enough for fingers to wrap behind the bar while keeping the pull profile relatively low. A width of 1-3/8 inches gives each installed pull a noticeable visual footprint that can align with rail heights or drawer front proportions.

Using This Tailored Traditional Pull In Projects

Where This Berenson Tailored Traditional Pull Fits Best

The Berenson Tailored Traditional Series 6-5/16 inch center to center Verona Bronze pull is suited for cabinet fronts that are bored on a 160 mm pattern. Its 7 inch overall length works well on medium to wider drawers and doors, where the pull spans enough of the front to look balanced. Because it is part of the Tailored Traditional collection from Berenson Corporation, this pull aligns visually with other pieces from the same series when a job calls for consistent hardware styling. The Verona Bronze finish supports projects built around that specific color tone, allowing installers to match this pull with other Verona Bronze decorative hardware elements on a woodworking job.

Details That Support Consistent Hardware Results

The 6-5/16 inch (160 mm) center to center dimension on this solid brass pull allows repeated, consistent drilling across a bank of cabinets, which helps maintain straight handle lines from door to door. The 11/16 inch projection gives enough clearance for a comfortable grip while keeping the pull closer to the cabinet face, which can help when doors open near adjacent walls or appliances. With a 1-3/8 inch width, the pull establishes a clear hardware line that can be aligned with rail heights or repeated across drawer stacks for a uniform appearance. The solid brass material provides a sturdy feel each time the handle is used, which supports dependable operation on frequently accessed cabinets in kitchens, baths, or shop-built storage. The Verona Bronze finish ties these dimensional details together visually, so each installed pull reads as a coordinated part of the Tailored Traditional design.

Common Questions About This Verona Bronze Pull

Choose This Pull For 160 Mm Cabinet Layouts

The Berenson Tailored Traditional Series 6-5/16 inch (160 mm) center to center Verona Bronze pull provides a solid brass handle sized for 160 mm boring patterns. With its 7 inch length, 11/16 inch projection, and 1-3/8 inch width, it supports comfortable grip and consistent alignment across cabinet runs. For projects built around Verona Bronze finishes and Tailored Traditional styling, this pull matches those requirements while delivering the dimensional details needed for accurate installation. Select this 1291-10VB-P pull to keep cabinet hardware on your next job coordinated and precisely spaced.