
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Capitol Floating Vanity Support Bracket gives you an 18 inch length, ultra-slim, stud-mounted bracket engineered for invisible strength and ease of installation, so wall-mounted vanities and surfaces stay clean-faced while being properly supported. Designed to mount along the side of standard wall studs, this floating vanity support bracket uses the stud face as its reference, which helps align every bracket on the run to the same plane. Its minimal profile arm extends cleanly into the space, so you can carry support under floating vanities, countertops, benches, and floating shelves without exposed metal under the work. The Capitol model uses a mounting style that disappears completely behind drywall or cabinetry, keeping the structural hardware out of sight while it carries the load. A Federal Brace FB-10965 part number ties this specific size, configuration, and stud-mounted style together for repeatable planning across jobs.
This floating vanity support bracket is designed to mount along the side of standard wall studs, so layout starts from existing framing rather than custom blocking. A dedicated "stud grip" feature lets you square the bracket up using the front edge of the studs, which holds the bracket in position while you fasten and keeps the arm projection consistent from stud to stud. The mounting plate uses 0.25 inch material thickness, so the bracket presents a solid base against the stud face as you tighten fasteners. Eight 0.26 inch diameter holes are provided in the plate to accept eight 1/4 inch lag screws or bolts, creating a clear fastening pattern and fastener size choice that ties the bracket securely into the wall structure.
This floating vanity support bracket is built as a floating vanity bracket, so it fits directly into wall-mounted vanity runs where hidden support is required. Its 18 inch arm length reaches into the cabinet or under the countertop span, helping you support floating vanities, countertops, benches, and floating shelves off the stud wall without visible steel under the edge. The ultra-slim, stud-mounted format works in rooms where drywall is planned over standard wall studs and where cabinetry or finished faces must sit flat, because the bracket mounts along the stud side and then disappears completely behind drywall or cabinetry. As an ADA and vanity bracket class product, it aligns with applications where open space under the vanity is part of the design and where visible legs or corbels are not acceptable. The Federal Brace FB-10965 designation keeps this use case tied to this exact 18 inch by 2-1/2 inch by 10-1/2 inch bracket size.
The stud-mounted design lets you repeat a simple process at every stud bay: align the bracket using the stud grip feature at the front edge of the studs, secure through the eight 0.26 inch diameter holes with 1/4 inch lag screws or bolts, and project the ultra-slim support arm into the room. The 0.50 inch support arm material thickness gives the arm a substantial cross-section from the stud face outward, while the 0.25 inch mounting plate presents a firm bearing surface against the lumber as you tighten each fastener. When using the Capitol for a countertop application, the design is intended so the support arms will fall within the structural base of the vanity to support the anticipated load, including sink, countertop, and user weight, which ties the arm position directly to where the cabinet framing is strongest. Because the mounting style disappears completely behind drywall or cabinetry, trades can complete framing, hanging board, and setting cabinets without exposed brackets interrupting the finish line, while still keeping the Federal Brace floating vanity support continuously engaged with the underlying structure.
The Capitol Floating Vanity Support Bracket is a floating vanity bracket in the ADA and vanity brackets category, so it is intended to support wall-mounted vanities and similar surfaces from the stud wall.
This bracket is designed to mount along the side of standard wall studs using eight 0.26 inch diameter holes sized for eight 1/4 inch lag screws or bolts, so it ties the support arm directly into the framing.
The stud grip feature allows you to square the bracket using the front edge of the studs, so the support arm projection and bracket alignment remain consistent, even when working without another installer.
This Federal Brace FB-10965 Capitol bracket is 18 inches long, 2-1/2 inches wide, and 10-1/2 inches high, providing an arm length suited to floating vanities, countertops, benches, and floating shelves.
For countertop use, this bracket is designed so the support arms fall within the structural base of the vanity, supporting the anticipated load of sink, countertop, and user weight through the cabinet structure.
The ultra-slim, stud-mounted design and mounting style that disappears behind drywall or cabinetry keep the support hardware out of sight, so only the floating vanity, countertop, bench, or shelf is visible.
The Capitol Floating Vanity Support Bracket from Federal Brace combines an 18 inch ultra-slim support arm, stud-mounted design, and a stud grip alignment feature to streamline floating vanity and countertop layouts. Its 0.25 inch mounting plate and 0.50 inch support arm thickness, together with eight 0.26 inch diameter fastener holes sized for 1/4 inch lag screws or bolts, give you a defined fastening pattern tied to wall framing. Mounting along the side of standard wall studs and disappearing behind drywall or cabinetry, this floating vanity support bracket fits projects where a clean, floating look and engineered, invisible strength need to work together.