Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Balata cabinet pull BP37629ORB is a 12-5/8 inch (320 mm) center-to-center pull finished in oil-rubbed bronze, so it spans wider cabinet fronts and drawer faces with a single, continuous grip point. The Balata name identifies it as part of Amerock Corporation's Balata collection, which ties multiple openings together with the same geometry for a consistent run of fronts. Subtle knurling texture on this pull provides a defined tactile surface, which helps fingers register the grip line quickly when opening heavier drawers or wider doors. Simple, geometric forms in the design give a straight, predictable edge reference, which matters when aligning multiple pulls in a row along rails. The oil-rubbed bronze finish has a rich burnished character with copper brush marks, which adds visual depth to the hardware line and can help bridge dark cabinet finishes with warmer trim or flooring.
This Amerock BP37629ORB Balata pull uses a 320 mm center-to-center mounting dimension, so hole locations are set on a consistent metric spacing for layout across multiple fronts. The 12-5/8 inch overall length means the bar extends slightly past the mounting points on both sides, giving a clear visual end reference when measuring from door or drawer edges. With this fixed span, cabinet shops and installers can plan drilling patterns around panel rails, stiles, and drawer box clearances while keeping a uniform line. The cabinet pull configuration focuses force at two points along the fastener line, which helps the hardware work comfortably on taller doors and wide drawers.
The Amerock BP37629ORB Balata 12-5/8 inch (320 mm) center-to-center pull is designed as decorative and functional cabinet hardware, so it works on cabinet doors and drawers where a linear grip is preferred. As part of Amerock's Balata collection, this pull carries the same subtle knurling and geometric profile across each piece, which means banks of upper and lower cabinets can share a coordinated look. The oil-rubbed bronze finish with burnished copper brush marks adds depth to the face of the pull, which helps it stand out against painted or stained wood without overpowering the door or drawer design. Its length and center spacing give it presence on larger fronts, allowing a single pull to serve where smaller handles might look undersized.
The defined 320 mm center-to-center spacing on the Amerock Balata cabinet pull gives installers a repeatable number for jigs and drilling templates, which simplifies layout when running multiple cabinets. The simple, geometric forms referenced in the Balata design provide straight edges that act as visual guides during alignment, helping keep handles square to door rails and drawer faces. Subtle knurling texture along the pull surface creates a consistent tactile band, so users can feel the grip zone even when approaching from the side, which is helpful on high-traffic cabinetry. The rich oil-rubbed bronze finish with visible copper brush marks offers variation within a uniform tone, allowing the same part number BP37629ORB to tie together different cabinet colors while maintaining a single hardware style.
The Amerock BP37629ORB Balata pull has a 320 mm center-to-center mounting span, so hole locations follow that metric spacing for consistent cabinet layouts.
The Amerock Balata BP37629ORB pull is 12-5/8 inches long, giving a substantial visual line on doors and drawers and supporting use on wider cabinet fronts.
The BP37629ORB Balata pull is finished in oil-rubbed bronze, with a rich burnished look and copper brush marks that add depth and coordinate with bronze-toned decor.
The Amerock Balata cabinet pull is decorative and functional cabinet hardware, suited to cabinet doors and drawers where a linear hand grip is desired.
The BP37629ORB pull belongs to Amerock's Balata collection, so its subtle knurling and geometric form can match other Balata pieces in the same space.
The Balata 320 mm cabinet handle with part number BP37629ORB is manufactured by Amerock Corporation, a brand known for decorative and functional cabinet hardware.
The Amerock BP37629ORB Balata 12-5/8 inch (320 mm) center-to-center pull offers a defined metric span and a long, straight profile, giving cabinet shops and installers a repeatable hardware choice for wider doors and drawers. Its oil-rubbed bronze finish with copper brush marks and subtle knurling texture delivers both grip and visual depth, tying multiple openings together with a single Balata collection style. For projects that call for decorative and functional cabinet hardware with a consistent 320 mm layout, this Amerock Balata cabinet pull provides a clear, identifiable option by name and part number.