Amerock Bellamy cabinet pull is a 5-1/16 inch (128 mm) center-to-center handle that operates cabinet doors and drawers using a consistent mounting span, which matters when lining up multiple fronts on a run of casework. This pull is part of the Bellamy collection, so its form follows a shared design language that keeps doors and drawers visually coordinated across a room. The pull is finished in polished chrome, a shimmering mirrorlike surface that reflects surrounding light and colors, helping doors read clean and sharp in finished installations. Chrome on this pull has slightly cool blue undertones, which support pairing with contemporary laminates and painted finishes that lean toward cooler tones. Amerock identifies this model as BP3668926, providing a clear part number to match during layout, ordering, and future replacements.
The 128 mm center-to-center dimension on this Bellamy pull establishes hole spacing that works for standard cabinet layouts, which is important when aligning handles across doors and drawers on longer runs. The 5-1/16 inch measurement also reads well on typical cabinet front sizes, so the pull spans enough width for a confident grip without visually overpowering narrower doors. Being a center-to-center spec, 128 mm gives you a straight reference for drilling templates, allowing quick layout when you are moving from one front to the next on site or in the shop.
The Amerock BP3668926 Bellamy 5-1/16 inch (128 mm) center-to-center pull belongs in decorative cabinet hardware applications where a unified look from door to door is important. As part of the Bellamy collection, it brings transitional curves that sit comfortably between traditional and modern casework, so it can run through a whole kitchen, bath, or built-in without looking out of place next to different door styles. The polished chrome finish contributes a mirrorlike surface that bounces light down cabinet runs, helping highlight straight reveals and consistent gaps you have worked to achieve. Slightly cool blue undertones in the chrome finish support pairing this pull with cool-toned paints, veneers, and surfacing materials, so door and pull read as a planned combination rather than separate elements. In a bank of drawers, repeating the 128 mm center-to-center pattern lets you maintain tight vertical alignment, which keeps drawer stacks looking orderly.
The 5-1/16 inch (128 mm) center-to-center dimension on this Amerock polished chrome pull gives you a known drilling span that matches common jigs, reducing layout time when you are installing on multiple cabinet faces. Because the Bellamy design blends modern and classic shapes, the same hardware can transition from wall cabinets to base cabinets and tall units, which avoids mixing different pull profiles and helps your install present as a single, continuous design. The polished chrome finish, with its mirrorlike nature, visually tightens the pull outline against painted or laminated doors, so any minor variation in door grain or tone is less noticeable next to the reflective hardware. Those slightly cool blue undertones in the finish help the pull sit cleanly against cooler whites, grays, and blue-based finishes, supporting consistent color relationships across a room. With a defined Amerock BP3668926 part number, spec sheets and job notes can call out the same pull every time, which supports repeat work where you want matching hardware on future phases.
The Amerock Bellamy cabinet pull has a 5-1/16 inch (128 mm) center-to-center dimension, which defines the hole spacing you drill when laying out cabinet doors or drawers.
On this Bellamy 128mm center to center pull, the term describes the distance between the two mounting holes, guiding your boring layout and template settings.
The Bellamy collection gracefully blends transitional curves with both modern and classic design, so it can tie together different cabinet door styles in the same project.
The Amerock BP3668926 pull has a polished chrome finish with a shimmering mirrorlike nature and slightly cool blue undertones that support cooler color schemes.
This Amerock decorative cabinet pull is used on cabinet doors and drawers as part of decorative cabinet hardware, providing both grip and a coordinated visual detail.
The Amerock BP3668926 part number uniquely identifies this Bellamy pull, which helps you match specifications and order the same model again on later jobs.
The Amerock Bellamy cabinet pull with its 5-1/16 inch (128 mm) center-to-center drilling span, polished chrome finish, and transitional Bellamy collection styling offers a defined hardware choice when you need consistent hole spacing and a unified look. Using the Amerock BP3668926 part number, you can align this pull with other Amerock decorative cabinet hardware on the project and call it out clearly on drawings and material lists. For cabinet runs where centered, repeatable pulls support clean reveals and straight sightlines, this Bellamy polished chrome pull provides a coordinated handle solution.