Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Merced cabinet pull in model BP37427ORB is a decorative handle designed for cabinet applications where an 8-13/16 inch (224mm) center-to-center layout is already laid out or planned. This fixed 224mm center-to-center dimension positions the mounting holes for a consistent handle spread across doors and drawers, helping maintain straight visual lines on banks of cabinets. The pull is part of the Merced collection, which is inspired by Scandinavian design, so its sculptural profile blends clean lines with bowing surfaces to give a shaped grip area that feels intentional rather than flat. Finished in Oil-Rubbed Bronze, the pull uses a rich burnished surface with copper brush marks that add visual depth against wood, painted, or laminate fronts, supporting a coordinated hardware look across a full run of cabinetry.
The stated 8-13/16 inch (224mm) center-to-center size defines the distance between the pull's mounting points, which is critical when laying out drilling jigs or matching existing holes in replacement work. Using the 224mm center-to-center dimension as the reference, installers can mark and bore cabinet faces so each pull aligns with neighboring hardware, supporting straight sightlines on drawer stacks and tall doors. The Oil-Rubbed Bronze finish with copper brush marks is already established on the product, so the visual tone is predictable when coordinating with other bronze-finished components in a kitchen, bath, or shop-built installation.
The Amerock BP37427ORB Merced 8-13/16 inch (224mm) center-to-center pull is positioned for cabinet work where decorative hardware is part of the finished look. As a handle within Amerock's Merced collection, it suits installations that echo Scandinavian design, where clean lines and subtle curves are preferred across doors and drawers. The sculptural profile with bowing surfaces creates a visual and tactile focal point on face frames or frameless fronts, which can help a run of cabinets feel finished without additional decorative trim. Because the pull is finished in Oil-Rubbed Bronze with copper brush marks, it naturally pairs with designs that use warm tones, darker stains, or mixed-metal schemes in kitchens, baths, or built-in storage.
The handle's 8-13/16 inch (224mm) center-to-center measurement also places it in a size range often used on wider cabinet drawers or taller doors, giving installers a proportionally longer grip along the face. This fixed dimension supports layout decisions when balancing different pull sizes within a project, because the 224mm pull can act as the larger element in a hardware schedule. As part of Amerock's decorative cabinet hardware, the BP37427ORB model integrates into broader projects that use Amerock solutions, supporting a consistent hardware language from one cabinet zone to the next.
The clearly defined 8-13/16 inch (224mm) center-to-center spacing on the BP37427ORB pull directly affects drilling accuracy and repeatability in the shop or on site. When this dimension is used as the base for a jig, holes can be reproduced quickly across multiple fronts, reducing layout time from cabinet to cabinet. The sculptural Merced profile, which blends clean lines with bowing surfaces, results in a predictable contour along the back of the pull, which can be helpful when aligning it parallel to door or drawer edges by eye during final fastening. Oil-Rubbed Bronze with copper brush marks creates a consistent surface appearance, so installers can anticipate how the pull will read under different lighting on walls of cabinets or islands.
Because the Merced collection is inspired by Scandinavian design, its visual language stays restrained, which gives designers and builders flexibility to combine this pull with a variety of cabinet panel styles without visual conflict. The product's role as decorative cabinet hardware within Amerock's offering also means it is designed to function as the visible finishing element on casework, so final alignment and spacing of the BP37427ORB handle contribute directly to the perceived quality of the install. Using the known center-to-center dimension and established finish characteristics, installers can plan hole locations, hardware spacing, and visual balance as part of the overall cabinet layout.
The Amerock BP37427ORB Merced pull uses an 8-13/16 inch (224mm) center-to-center measurement, so hole spacing follows this dimension when laying out cabinet fronts.
The Merced collection is inspired by Scandinavian design, so its sculptural profile with clean lines and bowing surfaces supports streamlined cabinet layouts.
The BP37427ORB pull is finished in Oil-Rubbed Bronze with a rich burnished nature and copper brush marks, giving the hardware visual depth on cabinet faces.
The Amerock Merced cabinet pull is designed as decorative cabinet hardware, so it is used on cabinet doors and drawers in rooms where hardware is a visible design element.
The BP37427ORB pull serves as a decorative handle within Amerock's cabinet hardware line, acting as the finishing touch on new or updated cabinetry.
The Merced sculptural profile blends clean lines with bowing surfaces, which adds subtle dimension to cabinet faces and supports a refined finished look.
The Amerock Merced cabinet pull in BP37427ORB combines a defined 8-13/16 inch (224mm) center-to-center layout with an Oil-Rubbed Bronze finish and Scandinavian-inspired shaping, giving you a decorative handle that pairs layout precision with a specific visual character. When a project calls for a pull that adds depth through copper-brushed Oil-Rubbed Bronze while maintaining clean lines on cabinet runs, this Merced model provides a consistent hardware choice across doors and drawers. Use its fixed center-to-center dimension and established finish to align your cabinet hardware schedule with the design goals of kitchens, baths, or built-in storage.