Rehau PVC Edgebanding 15/16" x 3 mm, Walnut Height, 300', 302596 041

Walnut Height Edgebanding 3mm Thick For Clean Edges

Walnut Height Edgebanding 3mm Thick gives you a PVC edge banding solution sized at 15/16 inch width for covering typical panel edges on casework and furniture, so raw edges can match walnut-height panel layouts across a run of cabinets or fixtures. The 3mm thickness builds a substantial edge profile along exposed sides, which helps create a defined transition between the face surface and the edge on worktops, shelves, and door fronts. The continuous 300 FT length keeps one color and profile consistent across multiple units, which reduces edge variation when you run long projects or repeatable production jobs. The PVC material is part of Rehau, Inc. edge banding offerings, so the banding matches the PVC category expectations for edgebanding and surfacing uses in cabinet and woodworking environments.

Key Walnut PVC Edgebanding Advantages On The Job

• The 15/16 inch width covers standard panel thicknesses with extra edge to trim, which helps installers align the band over the substrate and still finish to a clean flush surface.
• The 3mm thick construction builds a solid edge profile around cabinet components, which supports a more substantial feel at doors, drawer fronts, and shelving where the edge is handled frequently.
• The 300 FT length supports longer production runs from a single roll, which helps maintain visual consistency across multiple cabinets or fixtures drawn from the same walnut-height material selection.
• The PVC edge banding classification ties this product to typical edgebanding and surfacing workflows, which helps shops integrate it into standard routing and trimming sequences alongside other PVC edges.

Walnut PVC Edge Banding Fit And Application

This Walnut Height Edgebanding 3mm Thick is defined as 15/16 inch width, so it is sized to span common panel thicknesses used in cabinet carcasses and fronts with overhang available for trimming back. The 3mm thickness supports an edge profile that stands proud enough for shaping or softening transitions after bonding, which matters when coordinating the finished look with surrounding walnut-height surfaces on matching components. The 300 FT roll length gives shops enough material to edge multiple cabinets, doors, or panels in the same project cycle, which supports consistent appearance wherever this Rehau, Inc. PVC banding is applied around exposed panel edges.

Using Rehau PVC Edgebanding In Cabinet Work

Where Walnut Height PVC Edgebanding Fits Best

The Walnut Height Edgebanding 3mm Thick, 15/16 inch Width x 300 FT configuration suits cabinet and furniture edges where a walnut-height look is planned across casework and fronts. Its place in the Edgebanding & Surfacing category indicates it is intended for surfacing exposed panel edges rather than structural framing, so it lines up well with shelving, cupboard interiors, and exterior cabinet sides. The product class of Edge Banding defines its role at the perimeter of boards and panels, allowing you to carry a walnut-height visual line from face material to edge. As a Rehau, Inc. PVC edge banding with manufacturer part number 302596-041, it integrates into projects that rely on cataloged part numbers for repeat orders or for matching walnut-height finishes across multiple job phases.

Details That Support Consistent Edgebanding Results

The defined 3mm thick PVC construction of this Walnut Height Edgebanding supports an edge that can handle typical trimming and finishing steps without losing its walnut-height appearance along the length, which matters for maintaining straight, uniform lines on cabinets and casework. The 15/16 inch width provides enough coverage to register accurately over panel faces before trimming, which helps reduce the chance of exposed substrate after the final pass. With 300 FT supplied on the roll, installers and shops can edge a full set of cabinets or a bank of shelving from a single run, which aids in keeping the walnut-height tone consistent from piece to piece. The Rehau, Inc. branding and the specific manufacturer part number 302596-041 give purchasing and production teams a fixed reference, which supports repeatable selection when a job spec calls out this exact walnut PVC edge banding in future work.

Common Questions About Walnut Height PVC Edgebanding

Select Walnut Height Edgebanding 3mm Thick With Confidence

The Walnut Height Edgebanding 3mm Thick, 15/16 inch Width x 300 FT from Rehau, Inc. gives shops and installers a defined PVC edge banding choice for walnut-height cabinet and furniture projects. Its 3mm thickness and 15/16 inch width provide a practical combination for building solid, trimmable edges around standard panel sizes, while the 300 FT length supports consistent appearance across full room layouts or repeat runs. For work that specifies walnut-height visuals at every exposed edge, this Edge Banding product from Wurth Baer Supply aligns the material details with the demands of trade-focused cabinet production.