WB CLEAR SELF-SEALER WARM TONE 40 is a 1K waterborne clear self-seal topcoat designed for interior wood surfaces, so one product handles sealing and topcoating in the same system. This self-sealer needs no separate sealer coat, which simplifies finishing schedules and reduces product changes between steps. The clear waterborne formula provides transparency, so the wood grain stays visible for furniture, millwork, or cabinetry where the substrate appearance matters. A natural warm tone helps enhance natural wood, which supports color development on species where a slightly warmed look is preferred. The 40 gloss level targets projects specifying a particular sheen within the 05, 20, 40, and 90 gloss range, so it fits standardized finish systems. Good chemical resistance supports performance in typical interior environments where cleaners or common household products contact finished wood.
This ML Campbell clear self-sealer works as both sealer and topcoat on interior projects, so a finisher can stay with one product from first coat through final film build. Because it can be cross-linked for improved performance, shops can match finishing systems to project demands that call for upgraded properties from the same base product. Compatibility as a topcoat with any 1K or 2K waterborne polyurethane provides flexibility when integrating this clear into existing waterborne polyurethane systems. The 40 gloss level aligns with projects calling for a mid-sheen finish within the available 05, 20, 40, and 90 gloss levels, so it fits specifications that require consistent sheen control.
This 1K waterborne clear self-seal topcoat is intended for interiors, so it suits indoor wood applications such as cabinetry, millwork, or interior furniture where waterborne systems are preferred. The clear self-sealer configuration means one product provides sealing and build coats, which supports production lines seeking fewer product changes between coats. A natural warm tone to enhance natural wood works well on species where added warmth supports design targets, such as residential or commercial interiors calling for richer-looking wood. Because the coating provides good chemical resistance, it fits interior areas where contact with household or light commercial cleaners is expected. Transparency means color work, stains, or natural wood character remain visible under the film, which matters when grain definition is part of the design intent.
Self-seal performance with no sealer needed simplifies coating stacks, which supports repeatable finishing because the same product is used from base coat through final topcoat. Good hardness, as part of the finish description, helps the film resist marking in normal interior use, which supports longer service intervals before refinishing. Resistance to thermo-plasticity helps the coating remain more stable under temperature effects, which supports a more uniform appearance across panels and components over time. The ability to be cross-linked for improved performance gives shops an option to target higher performance from the same clear when specifications allow, which helps standardize on one base material. Compatibility as a topcoat with any 1K or 2K waterborne polyurethane makes it easier to integrate this product into established waterborne polyurethane systems while maintaining a warm-toned, transparent appearance on interior wood.
WB CLEAR SELF-SEALER WARM TONE 40 is a 1K waterborne clear self-seal topcoat for interior wood, so it handles both sealing and topcoating in one product.
The clear self-sealer needs no sealer coat, so finishers use one material from the first coat onward, which simplifies interior finishing sequences.
The product has a natural warm tone and a 40 gloss level, which gives interior wood a warmer look with a specified mid-sheen within the available gloss range.
This clear self-seal topcoat can be top coated with any 1K or 2K waterborne polyurethane, so it integrates into compatible waterborne polyurethane systems.
The clear self-sealer can be cross-linked for improved performance, which allows shops to target higher performance requirements using the same base product.
Good hardness and chemical resistance help the finish stand up to normal interior contact and cleaning, which supports service life on wood surfaces.
WB CLEAR SELF-SEALER WARM TONE 40 from ML Campbell provides a 1K waterborne clear self-seal topcoat for interior wood where transparency, natural warm tone, and defined 40 gloss sheen are specified. The self-seal nature, good hardness, chemical resistance, and resistance to thermo-plasticity support interior applications that demand both appearance and performance. Its ability to be cross-linked and used with 1K or 2K waterborne polyurethane systems helps align this clear with a range of interior finishing standards. For interior projects needing a warm-toned, transparent clear film from a single-product self-seal system, this topcoat fits that finish profile.
Sold In: 1 Each