WB HYDROPLUS CNVTR TOPCOAT 5 WHITE,25L is a 1K waterborne converter topcoat designed for coating wooden products for indoor use, so it serves as a dedicated finish layer for shop-built cabinetry, fixtures, and similar projects. This ML Campbell topcoat is a one-pack waterborne system, which means it is supplied as a single component that can be applied without separate on-site blending steps, helping streamline finishing work. The product is suitable for indoor wood, so it targets controlled interior environments where a consistent white finish and film performance are important. The converter is white, so it establishes an opaque base color that can serve as the visible finish or a color-accurate starting point. The 25L size provides a larger working volume in one container, which supports production finishing runs on multiple wooden components in the same material and color family.
1K Waterborne Converter Topcoat White is a one-pack waterborne topcoat, so the material moves from container to application with no additional component mixing step, which simplifies workflow during finishing cycles. The product is extremely fluid and has excellent wetting, so it travels across surfaces and edges with low resistance and forms a continuous film that follows the profile of indoor wooden products. The white converter base can be tinted up to 4% by volume of XA2006/XX Waterborne Pastes, so color adjustments occur within a defined tinting range that supports controlled movement from the starting white toward the desired shade. The same system leverages the CorobWorld G-Data Database for always accurate color dispensing, so tint recipes are stored and dispensed by data rather than manual guesswork, supporting color consistency across components and repeat runs.
1K Waterborne Converter Topcoat White is suitable for coating wooden products for indoor use, so it can be deployed on interior components that need a white or tinted waterborne finish layer rather than exterior exposure resistance. Because the product is classified as a topcoat in the Topcoats product class and Clear Topcoats category, it functions as the upper finish layer in a coating system, directly defining the surface feel and appearance of the indoor wood. The converter is white and can be tinted up to 4% by volume of XA2006/XX Waterborne Pastes, so it starts as a white base that can move within a controlled color range for projects needing off-white or light-toned results. Excellent hardness and good chemical resistance both support interior applications where users regularly contact the finished wood, such as frequently handled or cleaned surfaces in residential or commercial environments.
The white converter base is tightly controlled and filled by volume to ensure batch-to-batch color accuracy, so each 25L batch is aligned to a defined color target, helping maintain the same appearance across multiple orders or phases of the same project. The system leverages the CorobWorld G-Data Database for always accurate color dispensing, so tinting with XA2006/XX Waterborne Pastes follows stored formulas that support reproducible shades when the same color is dispensed again. The product can be cross-linked* for improved performance, so when the optional cross-linking step is used the cured film performance can be enhanced relative to the one-pack condition. Gloss levels available are 05, 15, and 30, so the same chemistry supports very low to low sheen finishes, allowing selection of a gloss level that aligns with glare control and appearance targets on indoor wood.
WB HYDROPLUS CNVTR TOPCOAT 5 WHITE,25L is a 1K waterborne converter topcoat from ML Campbell intended as a topcoat layer on wooden products for indoor use.
The 1K Waterborne Converter Topcoat White offers excellent hardness, so the cured film resists surface damage and wear in normal indoor use on finished wooden products.
This waterborne topcoat provides good chemical resistance, so the finished surface better maintains its look when exposed to common indoor chemical contacts.
The product is extremely fluid and has excellent wetting, so it levels smoothly and forms a uniform film over panels, edges, and profiles during application.
The white converter base can be tinted up to 4% by volume of XA2006/XX Waterborne Pastes, providing controlled color adjustment from the starting white shade.
Gloss levels available are 05, 15, and 30, allowing selection of a low-sheen appearance that aligns with visual and glare preferences on indoor wood.
WB HYDROPLUS CNVTR TOPCOAT 5 WHITE,25L combines a 1K waterborne converter design with excellent hardness, good chemical resistance, and extremely fluid application, so it supports interior wood finishing where film performance and workflow efficiency both matter. The white converter base is tightly controlled by volume for batch-to-batch color accuracy and can be tinted up to 4% by volume of XA2006/XX Waterborne Pastes, so it fits projects that depend on repeatable white or tinted colors across multiple components. With gloss levels available at 05, 15, and 30, this ML Campbell topcoat allows selection of sheen that aligns with the intended look of indoor wooden products.
Sold In: 1 Each