Century Cascade 20-3/8" Birch Bottom Mount Waste Pullout with 2-50 Quart White Bins Soft-Close, CASBM200-50PF

Century Cascade Birch Bottom Mount Waste Pullout

Century Cascade 20-3/8 birch bottom mount waste pullout is a bottom mount trash pullout that organizes waste in a cabinet opening while using a fixed wood carriage for consistent motion. The unit is made of baltic birch plywood, so the structure stays rigid during repeated use in a kitchen or bath cabinet. This waste pullout is equipped with Blum 170lb MOVENTO soft-close under mount slides, which support a heavy load and still pull in smoothly at the end of travel. The soft-close under mount slides sit beneath the carriage, leaving the sides open for access and helping keep the hardware out of sight during use. Two 50Qt. white bins sit in the carriage so the installer can provide both trash and recycling capacity in a single opening. This Century Components CASBM200-50PF trash pullout is sold as a coordinated set for a single bottom mount cabinet bay.

Key Details That Support Cabinet Waste Use

• The carriage is made of baltic birch plywood, which gives the waste pullout a wood platform that resists flexing and helps keep the bins square in their openings during daily operation.
• Blum 170lb MOVENTO soft-close under mount slides carry the load beneath the carriage, so the pullout tracks smoothly under weight while the soft-close action pulls the unit fully into the cabinet.
• Under mount slide placement allows the sides of the baltic birch plywood carriage to remain open, which makes the full bin area accessible and keeps metal hardware away from the bin edges.
• Two 50Qt. white bins provide a matched pair of containers sized for waste and recycling, so the cabinet opening can handle higher volume without needing a second pullout unit.
• The Century Components CASBM200-50PF configuration keeps the wood carriage, soft-close slides, and 50Qt. bins working together as a single bottom mount trash pullout for one cabinet bay.

Bottom Mount Waste Pullout Installation Use

This kitchen cabinet bottom mount waste pullout uses a wood carriage that sits on Blum 170lb MOVENTO soft-close under mount slides, so the installer works with a stable platform that aligns along the cabinet bottom. The under mount slides support the carriage from below, which positions the bins above the hardware and allows a clean interior look once installed. Four adjustable door mounted brackets provide horizontal adjustment as well as door tilt control, giving the installer a way to shift the door face and angle after mounting. That bracket adjustment helps align the door with neighboring fronts and fine-tune the tilt so clearances at the top and bottom of the opening remain consistent along the full height of the door.

Using This Waste Pullout In Working Cabinets

Where This Bottom Mount Trash Pullout Fits Best

This baltic birch plywood trash pullout is designed for use in kitchen and bath cabinets where a bottom mount trash pullout is preferred, so the weight of two 50Qt. white bins is carried directly by the cabinet floor. The Century Cascade 20-3/8 birch bottom mount waste pullout uses Blum 170lb MOVENTO soft-close under mount slides, which are suited to applications where heavy loads and frequent cycling are expected in a busy cabinet. Since the slides mount under the wood carriage, the overall system works well in cabinets where a clean side appearance is desirable because the hardware remains underneath the moving platform. The CASCADE WASTE PO,2-50QT,MOVENTO,20.375 configuration places both bins in a single pullout, making it suited to locations where trash and recycling are handled together behind one cabinet door.

Adjustment Details That Support Consistent Results

The four adjustable door mounted brackets on this Century Components CASBM200-50PF trash pullout provide horizontal adjustment as well as door tilt control, which helps during final fitting of the door to the cabinet face. Horizontal adjustment on the brackets lets the installer shift the door left or right relative to the pullout carriage, so the reveal between adjacent doors can be set to match the surrounding layout. Door tilt control allows the top and bottom of the door to be angled slightly in or out, which is useful for correcting small racking differences between the cabinet and the pullout. When combined with the Blum 170lb MOVENTO soft-close under mount slides, these adjustments help the door stay aligned while the pullout closes with a controlled motion, reducing the likelihood of the door edge contacting neighboring fronts.

Common Questions About This Century Waste Pullout

Selecting This Bottom Mount Waste Pullout

The Century Cascade waste pullout with baltic birch plywood carriage, Blum 170lb MOVENTO soft-close under mount slides, and two 50Qt. white bins offers a coordinated way to set up a bottom mount trash pullout in a single cabinet opening. The four adjustable door mounted brackets provide horizontal and tilt adjustments that aid in aligning the door face with surrounding fronts once the system is installed. For projects calling for a bottom mount trash pullout with soft-close under mount slides and paired 50Qt. containers, this Century Components CASBM200-50PF configuration from Wurth Baer Supply is suited to organizing waste inside a cabinet.