
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
blind corner pull-out gives you organized access to items stored deep inside a base blind cabinet. The Rev-A-Shelf 487 Craftsman Girasolo Blind Corner Pull-Out is a wood blind corner organizer built for a left door application in a blind right corner cabinet with a 15 inch opening target. This craftsman wood blind corner pull-out includes two wood trays with black wire accents, a post mechanism, and a soft-close pivot hardware system. The banded wood rim and recessed black wire accents also work as a handle for easier movement. For buyers comparing a soft-close blind corner organizer or maple blind corner shelves, this unit offers verified shelf construction, handed fit details, and a defined weight rating of 33 lbs. per shelf.
Key specs to confirm: This blind corner organizer is designed for 15 inch base blind cabinet openings and is handed for a left opening setup in a blind right corner cabinet. For a face frame cabinet, the minimum opening is 15.00 inches wide by 22.75 inches deep by 18.50 inches high. For a frameless cabinet, the minimum opening is 16.50 inches wide by 22.75 inches deep by 18.50 inches high. Each shelf is rated for 33 lbs. Confirm your cabinet construction type, clear opening width, interior depth, height, and door handing before purchase. If any installation tolerances or other technical limits are needed for your project, confirm them with the manufacturer or technical documentation.
What's included: The kit includes two wood left Girasolo trays with black wire accents, a post mechanism, a soft-close pivot hardware system, and mounting hardware.
What to verify before ordering: Confirm that your cabinet is a base blind corner cabinet, that the opening and interior dimensions meet the listed minimums, that you need the left opening version, and that your layout matches a blind right corner cabinet. Also verify that your planned shelf load stays within the stated 33 lb. per shelf rating. Follow manufacturer installation guidance and local building requirements where applicable.
A left opening blind corner pull-out is most useful when a standard shelf leaves the back corner of the cabinet difficult to reach. In many kitchen layouts, blind corner cabinets become storage for pans, mixing bowls, small appliances, or bulk pantry items, but the rear space often goes unused because access is awkward. This Girasolo blind corner organizer is made for that exact storage problem.
The Rev-A-Shelf blind corner pull-out uses two wood trays that pivot out with a soft-close hardware system. That matters for buyers who want easier access without adding a fixed shelf that still leaves items buried in the cabinet. The recessed black wire accents act as a handle, so the trays can be moved with a clear grip point. The 5/8 inch maple plywood shelf bottom gives buyers a verified shelf construction detail when comparing wood organizers to wire-only formats.
This model is a handed organizer, so the fit details matter as much as the cabinet size. It is intended for a left door arrangement in a blind right corner cabinet. Buyers searching for a 15 inch blind corner pull-out should still confirm whether the cabinet is face frame or frameless, because the minimum opening width differs. Face frame cabinets need a minimum opening of 15.00 inches wide, while frameless cabinets need 16.50 inches wide. Both require 22.75 inches depth and 18.50 inches height.
For installers, that means this product works best when the jobsite has already been measured carefully and the cabinet type is known. For serious DIY buyers, the key is not just the nominal cabinet size but the actual clear opening and the correct left opening orientation. If your project includes unusual hinges, interior obstructions, or other cabinet accessories, those conditions should be checked against the manufacturer guidance before installation.
When buyers compare one blind corner organizer to another, the most useful differences are usually construction, motion hardware, included parts, and fit clarity. This Rev-A-Shelf blind corner pull-out provides verified details in each of those areas. It is sold as a kit with two wood trays, a post mechanism, soft-close pivot hardware, and mounting hardware. That gives the buyer a clearer picture of what arrives for the install.
Another practical comparison point is how the organizer is operated. Some blind corner units focus mainly on storage format, while others also improve handling. Here, the banded wood rim with recessed black wire accents doubles as a handle, which supports easier tray movement during normal kitchen use. Buyers looking for maple blind corner shelves may also prefer the stated 5/8 inch maple plywood shelf bottom because it identifies the shelf material directly.
Fit confidence is another reason this product stands out as a clear option for a measured cabinet opening. The product data gives separate minimum opening requirements for face frame and frameless cabinets, plus the depth and height needed. That is useful for reducing ordering mistakes. The verified 33 lb. weight rating per shelf also helps buyers decide if the organizer matches their intended storage items.
For trade buyers, the value is in predictable fit criteria and included hardware. For homeowners, the value is simpler access to a difficult corner area using a wood blind corner organizer with soft-close movement. In both cases, the most important step is confirming cabinet construction, opening size, and left opening orientation before ordering.
This blind corner pull-out is designed for 15 inch base blind cabinet openings, but buyers must confirm face frame or frameless construction and the listed minimum opening dimensions.
This Rev-A-Shelf blind corner organizer is the left opening version for a blind right corner cabinet.
This blind corner organizer requires a minimum face frame opening of 15.00 inches wide by 22.75 inches deep by 18.50 inches high.
This blind corner organizer requires a minimum frameless opening of 16.50 inches wide by 22.75 inches deep by 18.50 inches high.
This Rev-A-Shelf blind corner pull-out has a verified weight rating of 33 lbs. per shelf.
This Girasolo blind corner organizer includes two wood left trays with black wire accents, a post mechanism, soft-close pivot hardware, and mounting hardware.
This blind corner organizer uses wood trays with a 5/8 inch maple plywood shelf bottom and recessed black wire accents.
This Rev-A-Shelf blind corner pull-out is equipped with a soft-close pivot hardware system.
This blind corner organizer should be checked for cabinet type, clear opening, interior depth, height, and correct left opening orientation before install.
This cabinet accessory should be installed by following manufacturer installation guidance and local building requirements where applicable.
blind corner pull-out selection is easier when the cabinet measurements and handing are confirmed first. This Rev-A-Shelf kit includes two wood left Girasolo trays, the post mechanism, soft-close pivot hardware, and mounting hardware for a defined package. Before purchase, confirm that your cabinet is a base blind corner cabinet, that the opening meets the stated face frame or frameless minimums, and that you need the left opening version for a blind right corner cabinet. Those checks help match the organizer to the job the first time.
Sold In: 1 Each