Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
blind corner pull-out gives a base blind cabinet a more usable storage area by bringing trays out where you can reach them. The Rev-A-Shelf 487 Craftsman Girasolo Blind Corner Pull-Out is a blind corner organizer designed for an 18 inch blind corner pull-out application with a right opening layout for a blind left corner cabinet. This soft-close blind corner pull-out includes two wood trays with black wire accents, a post mechanism, pivot hardware, and mounting hardware. The banded wood rim and recessed black wire accents also act as a handle, so the trays are easier to operate. Each shelf is rated for 33 lbs., and the shelf bottom is made from 5/8 inch maple plywood.
Key specs to confirm: This blind corner pull-out is designed for 18 inch base blind cabinet openings and uses a right opening layout for a blind left corner cabinet. For a face frame cabinet, the minimum opening is 18.00 inches wide x 23.00 inches deep x 18.50 inches high. For a frameless cabinet, the minimum opening is 19.50 inches wide x 23.00 inches deep x 18.50 inches high. Each shelf is rated for 33 lbs. Buyers should confirm cabinet construction type, clear interior depth, opening width, and available height before ordering. If any installation tolerance, replacement parts detail, or other technical requirement is unclear, confirm it with the manufacturer or technical documentation.
What's included: The kit includes two wood right Girasolo trays with black wire accents, a post mechanism, a soft-close pivot hardware system, and mounting hardware.
What to verify before ordering: Confirm the cabinet is a base blind corner application, confirm the cabinet opening meets the listed minimum dimensions, confirm you need the right opening version, and confirm face frame or frameless construction before purchase.
A Girasolo blind corner organizer is useful when a standard blind cabinet leaves cookware, mixing bowls, pantry goods, or cleaning supplies buried in the back corner. In many kitchens, the issue is not a lack of storage volume. The issue is poor access. A blind corner organizer addresses that by moving stored items into reach rather than forcing the user to lean into the cabinet opening.
This Rev-A-Shelf blind corner pull-out is built for buyers who need a right opening blind corner cabinet organizer for a blind left corner cabinet. That handing detail matters because blind corner products are not universal. If the opening direction is wrong, the organizer may not function as intended in the cabinet layout. Installers and serious DIY buyers should verify the cabinet side, door orientation, and opening path before ordering.
The included two-tray layout supports organized storage on separate levels. That can help divide frequently used items from occasional-use items without stacking everything in one deep corner. The banded wood rim with recessed black wire accents serves a practical purpose because the wire detail doubles as a handle for operation. The 5/8 inch maple plywood shelf bottom also gives buyers a clear material detail when matching accessories to other wood cabinet components.
The soft-close blind corner pull-out hardware system is another practical point for daily use. Controlled closing can help the organizer return more smoothly during regular kitchen traffic. Each shelf has a 33 lb. rating, which gives buyers a verified reference for planning loads. If your intended storage is unusually dense or bulky, verify real-world fit and loading with the manufacturer guidance before installation.
For fit, this 18 inch blind corner pull-out requires careful measurement. Face frame and frameless cabinets have different minimum opening widths, while both require 23.00 inches depth and 18.50 inches height. That means this product is best chosen by cabinet dimensions first, then by handing, then by finish and style.
When comparing a blind corner pull-out, buyers usually focus on four areas: cabinet fit, opening direction, tray construction, and included hardware. This product provides verified information in all four categories. It is identified as a Rev-A-Shelf blind corner pull-out, it is specified for right opening use in a blind left corner cabinet, it uses wood trays with black wire accents, and it includes the post mechanism, soft-close pivot hardware system, and mounting hardware.
That level of detail helps reduce guesswork during purchasing. Some buyers mainly want a blind corner organizer that matches wood interiors. Others prioritize a soft-close mechanism or need a clear shelf load reference. Here, the 5/8 inch maple plywood shelf bottom and the 33 lb. per shelf rating give concrete data points without relying on assumptions.
Another useful comparison point is cabinet construction. This organizer lists separate minimum opening widths for face frame and frameless cabinets. That matters because many ordering mistakes happen when buyers measure only the cabinet box and not the true usable opening. A product page with distinct face frame and frameless requirements gives installers a better basis for selection.
For buyers who want a craftsman wood blind corner organizer, the banded wood rim and recessed black wire accents define the visible tray style. For buyers who care most about operation, the soft-close pivot hardware system is the practical feature to review. In either case, the right way to compare blind corner organizers is to confirm dimensions and handing first, then review included components and shelf capacity.
This Rev-A-Shelf blind corner pull-out fits a face frame cabinet with a minimum 18.00 inch W x 23.00 inch D x 18.50 inch H opening.
This blind corner organizer fits a frameless cabinet with a minimum 19.50 inch W x 23.00 inch D x 18.50 inch H opening.
This Girasolo blind corner organizer is the right opening version for a blind left corner cabinet.
This 18 inch blind corner pull-out is designed for 18 inch base blind cabinet openings.
This Rev-A-Shelf kit includes two wood right Girasolo trays, black wire accents, a post mechanism, soft-close pivot hardware, and mounting hardware.
This blind corner pull-out has a 33 lb. weight rating per shelf.
This maple blind corner organizer uses a 5/8 inch maple plywood shelf bottom with a banded wood rim and black wire accents.
This soft-close blind corner pull-out includes a soft-close pivot hardware system.
This blind corner organizer should be matched to cabinet type, minimum opening size, interior depth, available height, and the required right opening layout. Follow manufacturer installation guidance and local building requirements where applicable.
blind corner organizer selection starts with fit, not appearance. This Rev-A-Shelf unit includes two wood right Girasolo trays, a post mechanism, soft-close pivot hardware, and mounting hardware for an 18 inch base blind cabinet opening. Before purchase, confirm face frame or frameless construction, verify the minimum opening dimensions, and make sure you need the right opening version for a blind left corner cabinet. Careful measurement helps this blind corner pull-out install as intended and reduces ordering errors.
Sold In: 1 Each
