Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCCC waste pullout mounts to the floor of a 15-inch base cabinet and rolls two 35 quart black bins out together, keeping kitchen waste and recycling sorted and out of sight behind a cabinet door.
A double-bin pullout does what a single-bin unit cannot: it keeps two waste streams in one cabinet, so trash and recycling stay separated without occupying two separate base cabinets or spilling bins onto the floor. Rolling both out together on over-travel slides means the bins clear the cabinet face far enough to lift out for emptying without wrestling with the door or the carriage. That extra travel distance is what makes a double-bin setup practical in a tight kitchen.
The carriage is prefinished maple, which means it ships ready to go into the cabinet without any sanding, staining, or topcoat. The two 35 quart bins are black and sit in the carriage on the bottom-mount slide system. Soft-close damping slows the carriage on the return so neither a heavy load nor a quick push sends the unit slamming back into the cabinet. The slide system is rated to 135 pounds, comfortably above what two loaded kitchen bins typically weigh. When a door-mount bracket is connected, the carriage follows the door open automatically, so there is no separate pull needed to reach the bins.
Cabinet shops building kitchen runs with 15-inch base cabinets frequently specify this unit to deliver a finished, door-integrated waste solution without custom work. Designers specifying full kitchens use the maple carriage because it installs cleanly without needing a painted or stained finish to match. Homeowners replacing a single-bin unit or reclaiming a base cabinet from under-counter clutter get a two-bin setup in the same footprint. The minimum cabinet opening requirements are 15 inches wide, 22-1/4 inches deep, and 20-7/8 inches tall, so confirm all three dimensions against the cabinet before ordering.
Yes. Two 35 quart black bins are included. Lids are not part of this SKU; check Rev-A-Shelf replacement accessories if lids are needed.
The carriage is door-mount compatible, but the door-mount bracket is sold separately. Order the appropriate Rev-A-Shelf bracket for the 4WCCC series to connect the unit to the cabinet door.
The cabinet opening needs to be at least 15 inches wide, 22-1/4 inches deep, and 20-7/8 inches tall. Measure all three before ordering.
The carriage dimensions, slide system, and bin capacity are the same across the 4WCCC family. This variant has a prefinished maple carriage and black bins. Other finish and bin-color combinations are available in the same series.
The prefinished maple carriage and included black bins mean this pullout goes from the box into a 15-inch base cabinet without extra prep, putting a sorted, soft-close waste station behind the cabinet door from day one.
Sold In: 1 Each
