Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Non-Methylene Chloride Bulk Spray Grade Contact Adhesive describes this Formica Adhesives product as a spray-grade contact adhesive designed for bulk use on demanding projects. The 54 gallon capacity supports high-volume fabrication, so larger installations can be covered from a single container for consistent bonding across multiple panels. The clear adhesive appearance helps when working where a visible glue line is undesirable, supporting cleaner finished work. A 27 percent solids formulation means substantial bonding material is left after solvent flashes, which supports strong adhesive films on substrate surfaces. The contact adhesive construction provides tack on both mating surfaces, allowing firm bond-up when pieces are brought together. Its non-flammable nature during normal handling and spraying improves jobsite risk management where ignition sources are present. Being free of methylene chloride addresses projects where that solvent is not acceptable, while keeping the contact adhesive performance needed for shop and field work.
This Formica Adhesives contact adhesive provides a 30 minute open time, so once both surfaces are coated and flashed, there is a practical window for positioning and mating components without rushing. A 2-5 minute dry time allows the wet film to reach bond-ready condition quickly after spraying, supporting efficient cycle times on repetitive layouts. That dry time range gives flexibility for small runs or larger layups, because the adhesive can be monitored within a predictable interval before bond-up. The combination of generous open time and short dry time helps coordinate spraying, staging, and pressing steps in a production line or on-site workflow. As a spray grade contact adhesive, it is formulated for spray equipment application, which supports even coverage over wide surfaces during fabrication.
The 54 Gallon Contact Adhesive Clear capacity is suited to shops and production environments that go through adhesive quickly, because one bulk container can service extended runs. Excellent adhesion to a variety of substrates means this adhesive can be used on different core materials within the same facility, reducing the need to switch chemistries mid-project. Its non-flammable rating during normal use supports operations in woodworking environments where ignition sources, such as dust collection motors or heaters, are present. Non ozone-depleting formulation matters in facilities attentive to environmental impact characteristics documented by the manufacturer. High heat resistance allows this contact adhesive to support assemblies that may sit near warm equipment or in sun-exposed areas where panel temperature can rise. The clear character of the adhesive film helps when bonding decorative surfaces where telegraphing of a colored glue line would be undesirable.
The 2-5 minute dry time window lets operators adapt to conditions by watching for the transition from wet to bond-ready film, which supports consistent bonding results job after job. A 30 minute open time reduces pressure to join parts immediately, so workers can align, stage, and handle larger components with less risk of premature contact. The excellent green strength reported for this contact adhesive helps bonded assemblies hold alignment when moved soon after mating, supporting downstream cutting or trimming without waiting for extended cure. High heat resistance provides a margin against bond creep when finished pieces later experience elevated temperatures, which is important for dimensional stability. With 27 percent solids, the resulting adhesive film has substantial body after solvent evaporation, contributing to uniform coverage that supports reliable adhesion across the bonded surface.
The F-170ZF-54 product is a Formica Adhesives contact adhesive, so it is designed to be applied to both bonding surfaces and then joined to create an instant, high-strength bond.
The non-flammable formulation means the contact adhesive can be sprayed and handled where flammability classification is important, supporting safer workflows around common ignition sources.
The 27 percent solids level means a significant adhesive film remains after drying, helping create a robust bond layer over the substrate surface.
This contact adhesive has a 30 minute open time, providing a workable window to position and mate coated parts after the adhesive has dried to a bond-ready state.
The adhesive dry time is 2-5 minutes, allowing the sprayed film to reach bond-ready condition quickly so assemblies can move from application to bond-up efficiently.
This Formica Adhesives product has a shelf life of 1 year in an unopened container, allowing it to be held in inventory for future projects within that period.
This Formica Adhesives non-flammable, non-methylene chloride contact adhesive in a 54 gallon size combines spray grade application, 27 percent solids, excellent adhesion, and high heat resistance to support demanding fabrication. The 2-5 minute dry time and 30 minute open time balance speed with working flexibility for shop or field bond-ups. With a clear adhesive film and non ozone-depleting formulation, it suits decorative surfaces and operations attentive to environmental attributes. When a bulk contact adhesive is needed for repeated assemblies, this F-170ZF-54 product offers the performance characteristics and volume required for consistent workflow.
Sold In: 1 Each
