Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River tambour panel style 403 is a solid wood panel with a flexible backing that easily bends, so it can follow curves and corners where flat sheet goods will not conform cleanly. The 12 inch W x 48 inch L size gives a manageable section for appliance garages, small curved cabinets, or accent panels that need a tight, controlled layout. The 5/8 inch cove-cut profile creates a rhythmic, sculpted face, which adds depth and visual texture to otherwise flat surfaces. The panel is made in the USA from premium North American hardwoods, so material quality supports consistent machining around your joinery and opening details. Because this tambour is unfinished, it can be finished to match surrounding casework or trim, keeping design continuity on built-ins and cabinetry. Allowing the material to stretch and acclimate for at least 48 hours before finishing supports a stable surface as it bends in service.
This tambour panel installs using standard construction or paneling adhesive onto any solid substrate, which keeps mounting straightforward when working over MDF, plywood, or other stable backers. The flexible backing allows the panel to bend into place as the adhesive sets, helping it follow inside or outside curves without complex clamping setups. Using a solid substrate directly behind the panel supports long-term contact for the adhesive, which is important when the panel is stressed across a radius. Because the tambour is unfinished paint grade hardwood, it can be trimmed to fit and then finished after it is adhered, keeping cut edges and exposed faces under the same coating system.
The 12 inch W x 48 inch L size fits well in appliance garages and smaller millwork sections where full-size sheets would create excess waste or be difficult to handle. The flexible backing that easily bends makes this panel suited for curved cabinet ends, soffit transitions, or radius backs where a continuous surface is needed. The 5/8 inch cove-cut face profile adds subtle rhythm that can visually connect with other decorative hardware and moldings, helping this tambour tie into broader trim packages. Because each panel features natural variations in color and grain, finished projects gain depth and texture that read as solid wood, which is especially effective on focal elements like appliance garages or niche backs. The premium North American hardwood construction supports tight inside corners and edge details where softer materials might crush or deform during fitting.
The flexible backing working with solid hardwood strips allows the tambour to follow repeated curves across multiple cabinets, so a standard radius can be carried consistently through a run. Installation with standard construction or paneling adhesive onto a solid substrate creates a uniform bond line, which helps each panel seat the same way from one opening to the next. The unfinished paint grade surface means each piece can be primed and topcoated together, supporting color and sheen consistency on repeated components like multiple appliance garages or matching curved panels. Natural variations in grain and color across each panel add depth, so repeated use still looks like real wood rather than a flat, printed surface. The made in the USA origin ties these details together with predictable manufacturing, helping shops rely on similar bending behavior and appearance when projects repeat the TM403-1248PO specification.
The White River TM403-1248PO panel measures 12 inches wide by 48 inches long, which suits appliance garages and smaller curved cabinet or millwork sections.
The tambour panel uses a flexible backing that easily bends, allowing the solid wood face to follow curves and corners while remaining continuous across the radius.
The 5/8 inch cove-cut profile shapes the face with repeating coves, adding depth and texture that enhance the look of appliance garages and curved cabinet sections.
This tambour panel is paint grade and unfinished, so it accepts primers and topcoats, supporting projects where the panel must match surrounding painted casework.
The tambour panel attaches to any solid substrate using standard construction or paneling adhesive, fitting work over MDF, plywood, or other stable backers.
The panel is made in the USA from premium North American hardwoods, providing solid wood construction with natural grain variations for depth and texture.
The White River tambour panel style 403 combines a flexible backing with solid North American hardwood strips, giving you a bendable 12 inch by 48 inch module for curved or corner applications. The 5/8 inch cove-cut face and paint grade unfinished surface align with appliance garages, curved cabinet ends, and other millwork where paint-ready, textured wood is required. With straightforward adhesive installation over a solid substrate, this TM403-1248PO panel offers a practical way to bring radius and corner details into line with the rest of your decorative hardware and moldings.