Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River Tambour Panel Style 100 is a solid wood tambour panel that bends to follow curves and corners, so it supports clean lines even on non-straight runs. The panel measures 12 inches wide by 96 inches long, giving continuous coverage along tall cabinets or full appliance garage spans. Its 1/4 inch double bead profile creates a narrow, repeating rhythm that reads clean and controlled in finished millwork. The panel is made in the USA from premium North American hardwoods, so the walnut material matches traditional cabinet-grade stock in both look and machining behavior. A flexible backing is bonded to the wood strips, allowing the assembly to move as one sheet during layout and installation. The tambour is unfinished, so stain or clear coats can be matched to surrounding cabinetry and other interior woodwork on the job.
This solid wood tambour panel is designed to mount over a solid substrate, so it behaves like a thin, bendable skin over cabinets or architectural elements. Installation uses standard construction or paneling adhesive, which spreads load across the backing and supports full-surface contact on flat or curved bases. The flexible backing allows the 96 inch length to follow arcs and corners while the adhesive holds each strip in alignment. Because the tambour is unfinished, the material can acclimate before finishing, so the panel settles to site conditions ahead of any stain or topcoat work. Each of these traits helps the installer move from dry fit to final finish using familiar woodworking steps and tools.
This walnut tambour panel fits projects where a continuous wood surface must navigate curves or inside corners without visible breaks between narrow pieces. The flexible backing lets the 12 inch by 96 inch sheet wrap around corner cabinets, appliance garages, or curved panels while keeping the 1/4 inch double bead profile running straight. Because the panel uses solid wood strips, trimming at the ends or sides follows typical woodworking techniques, so openings and edges can be tuned on site. The natural variations in color and grain across the strips add depth and texture, which helps larger surfaces avoid a flat or uniform appearance while still reading as a single installation.
The combination of solid walnut strips and a flexible backing means each panel moves as one unit during layout, so alignment of the double beads can be managed from one reference edge. Standard construction or paneling adhesive creates a broad bond line to the substrate, helping the profile stay tight against the base through curves and straight runs. The unfinished state lets the material stretch and acclimate for at least 48 hours before finishing, which supports stable color and sheen when stain or clear finishes are later applied. Made in the USA from premium North American hardwoods, the panel offers material characteristics familiar to cabinet and millwork shops, which supports consistent machining, sanding, and finish build across repeated jobs.
White River Tambour Panel Style 100 measures 12 inches wide by 96 inches long, so it spans tall cabinets or long sections in one continuous panel.
This tambour panel is walnut made from premium North American hardwoods and is made in the USA, aligning with common cabinet-grade materials.
The tambour panel is attached using standard construction or paneling adhesive onto a solid substrate, allowing the flexible backing to conform while staying bonded.
The flexible backing allows the solid wood strips to bend together, so the panel can follow curves and corners while keeping the 1/4 inch double bead profile aligned.
The tambour is unfinished and the material should stretch and acclimate for at least 48 hours before finishing, supporting even stain or clear coat results.
The 1/4 inch double bead profile creates a tight, rhythmic pattern, giving a refined linear look across doors, appliance garages, or curved panel applications.
This White River walnut tambour panel combines solid North American hardwood, a flexible backing, and a 12 inch by 96 inch format to handle straight, curved, or corner installations. The unfinished surface and 1/4 inch double bead profile support controlled visual lines that can be matched to surrounding cabinetry. For projects needing a bendable wood face that still behaves like standard hardwood during machining and finishing, this tambour panel offers a practical, job-ready option.