White River tambour panel is a solid wood panel with a flexible backing that easily bends, so it conforms to curves and corners where rigid panels will not fit cleanly. The 12 inch W x 48 inch L size gives a workable section for appliance garages and tambour door runs without handling oversized sheets on the bench. The panel is unfinished paint grade, so it accepts your coating system and lets the surface visually match surrounding painted cabinetry. Each panel is made from premium North American hardwoods, which supports a uniform workability during cutting and trimming. Natural variations in color and grain are present in every piece, adding depth and texture to finished work. The tambour design uses narrow solid wood strips bonded to the backing, so the assembly moves as a unit while still following tight radiuses.
This tambour panel installs using standard construction or paneling adhesive, so it bonds to any solid substrate without specialty fasteners or clips. Because the backing is flexible, the adhesive layer creates full support as the panel bends, keeping the face aligned to cabinet sides, curved panels, or appliance garage frames. Attaching to a solid substrate means the tambour works as a stable skin rather than a structural element, which simplifies carcass design. When the adhesive is spread evenly, the narrow wood strips stay locked in position relative to one another, so the double bead profile remains consistent along the radius.
This panel is part of the appliance garages and tambour doors class, so it naturally suits roll-top style openings and curved enclosures in kitchens and casework. The 9/32 inch double bead flexible thin profile creates a compact face pattern that works at smaller scales, so it reads correctly on undershelf garages instead of looking oversized. Because each panel is 48 inches long, it can span typical counter-width appliance garage openings or vertical cabinet sections without joints in many layouts. The paint grade surface ties into painted kitchens, work centers, and built-ins, so the tambour can visually disappear into face frames and end panels once coated.
The flexible backing that easily bends allows the tambour to follow tight radiuses, so installers can design smooth curves rather than faceted segments. Solid wood strips bonded to this backing give a durable working face, so light machining of edges and final hand-sanding behave like other hardwood components in the shop. Premium North American hardwoods contribute predictable cutting and shaping, so saws and routers leave cleaner edges along the 9/32 inch bead pattern. The unfinished state allows the material to stretch and acclimate for at least 48 hours before finishing, so the panel can settle in its curved position before coatings lock it in place. Natural variation in color and grain adds subtle movement under paint or clear topcoats, so even simple runs gain visual depth across the cabinet elevation.
The tambour panel measures 12 inches wide by 48 inches long, so it suits many appliance garage openings and curved cabinet sections without needing seams in the run.
The panel is made in the USA from premium North American hardwoods, so cutting, trimming, and sanding behave like other hardwood cabinet components.
The flexible backing easily bends, so the panel conforms to curves and corners and bonds to solid substrates using standard construction or paneling adhesive.
The tambour is unfinished paint grade, so it is ready for priming and painting to match surrounding cabinetry, after the material stretches and acclimates before finishing.
The 9/32 inch double bead flexible thin design creates a tight, rhythmic face pattern, so smaller appliance garages and trim-scale applications look proportionally correct.
The panel installs using standard construction or paneling adhesive onto any solid substrate, so the face stays supported while the backing flexes to the desired curve.
The TM110-1248PO tambour panel from White River brings a flexible backing, 12 inch by 48 inch format, and 9/32 inch double bead pattern to appliance garages and curved cabinet details. The unfinished paint grade hardwood face lets finishes align with your existing system while the solid wood construction keeps shop processes familiar. For curved runs that need a bendable, adhesive-mounted hardwood surface, this panel offers a purpose-built solution ready to integrate into your next cabinet or millwork project.