White River tambour panel is a flexible solid wood panel designed for decorative woodwork and appliance garage style applications. The 12 inch width and 96 inch length give you a continuous red oak surface that spans tall panels, vertical runs, or wide horizontal bays in one piece, reducing seams across your project. The panel uses a flexible backing that lets the wood bend, so it follows curves and corners where rigid sheet goods would fight the radius. This tambour is unfinished red oak, which allows you to stain or clear finish it to match surrounding cabinetry and moldings on the same job. The panel is part of White River decorative wood panels, so it fits into projects that use wood panels and moldings as a design feature. The TM110-1296RO part number identifies this specific 9/32 inch double bead, thin, flexible red oak panel.
This tambour panel is designed to be installed using standard construction or paneling adhesive onto any solid substrate, which means you bond it to a stable backer rather than relying on mechanical fasteners. The flexible backing lets the panel conform to the substrate as you work it into position, so the adhesive makes full contact along curves and straight runs. Because the tambour is unfinished, the material can stretch and acclimate for at least 48 hours before finishing, allowing it to settle on the substrate before you apply stain or topcoat. This installation approach fits typical shop workflows for laminating decorative wood panels to plywood, MDF, or other solid backers.
This panel belongs to the appliance garages and tambour doors class, so it suits projects where a flexible wood face needs to roll or follow a curved track. The 12 inch width pairs with upper cabinet or countertop-depth applications, allowing you to span openings commonly used for small appliance storage. The 96 inch length supports cutting multiple appliance garage fronts or curved door sections from a single panel, which keeps grain and color consistent across a bank of cabinets. The solid red oak face with a double bead pattern adds depth and texture to decorative wood panels, integrating with other White River moldings in the same space. Natural variations in color and grain across the panel introduce visual interest, so even simple cabinet forms gain dimension without extra applied trim.
The flexible backing is central to repeatable installations because it allows the panel to bend uniformly, so each piece follows the same curve when applied over a solid substrate. Using standard construction or paneling adhesive on the back of the tambour means the bonding process matches familiar shop practices, simplifying labor planning on multi-unit runs. The thin, 9/32 inch double bead profile creates a consistent surface geometry, so successive cuts from the same TM110-1296RO panel align visually when set side by side. Since the tambour is unfinished, the material can stretch and acclimate for at least 48 hours before finishing, which supports even stain or clear coat results across the beaded surface. Being made in the USA from premium North American hardwoods, the panel offers red oak that behaves predictably during sanding and finishing, helping produce consistent results from job to job.
The White River tambour panel measures 12 inches wide by 96 inches long, so it can cover tall panels or yield multiple shorter appliance garage or door components from one piece.
The tambour panel is installed using standard construction or paneling adhesive onto any solid substrate, so it bonds directly to a stable backer during assembly.
The panel has a flexible backing that easily bends, allowing it to follow curves and corners where rigid wood panels would not conform.
The TM110-1296RO tambour is unfinished, allowing the material to stretch and acclimate for at least 48 hours before you apply your chosen finish.
This tambour is made in the USA from premium North American hardwoods in red oak, giving a solid wood face suitable for staining or clear finishing.
The panel is part of the appliance garages and tambour doors class, so it suits rolling or curved-front cabinet openings needing a flexible wood surface.
The White River tambour panel combines a 12 inch by 96 inch red oak face with a flexible backing, so it serves appliance garages, curved doors, and decorative panels that need to bend. Using construction or paneling adhesive over a solid substrate ties directly into typical shop processes for laminating wood faces. Because the tambour is unfinished and made from premium North American hardwoods, you can align stain and clear finishes with other red oak components on the project. For curved runs, corners, and appliance garage fronts that call for a continuous hardwood surface, this TM110-1296RO panel provides a defined size and profile that supports repeatable layouts.