White River tambour panel style 402 is a 12 inch wide by 48 inch long solid wood tambour panel with a 1/4 inch double cove-cut profile in walnut, so it gives cabinets and millwork a continuous slatted look with real hardwood depth. The flexible backing on this panel lets the face bend, which helps you follow curves and corners without cutting individual strips. Being part of the appliance garages and tambour doors class, this panel suits applications where a flexible wood surface is needed along a radius or return. The unfinished walnut surface lets you sand and finish to match adjacent components, which supports consistent color control across a run. Made in the USA from premium North American hardwoods, the panel brings the grain and weight of solid wood to custom work, which matters when matching existing walnut installations.
This tambour panel is designed to be attached using standard construction or paneling adhesive to any solid substrate, so installers can bond it over plywood, MDF, or built cases without mechanical fastening through the face. The flexible backing allows the 12 inch by 48 inch panel to follow curves and corners, which lets you apply adhesive, press the panel into the radius, and hold it until the bond sets. Because the walnut face is unfinished, the material can stretch and acclimate for at least 48 hours before finishing, which supports stable alignment of the cove pattern prior to applying stain or topcoat. Using a familiar adhesive-based installation keeps workflow straightforward on site and in the shop.
This solid wood tambour panel is classified under appliance garages and tambour doors, so it fits naturally into upper cabinet bays where a flexible surface is needed to form a rolling or curved enclosure. The 12 inch width works well across narrow openings or can be run in multiples for wider spans, which gives shops options when laying out custom garage fronts. At 48 inches long, each TM402-1248WA panel can cover taller vertical runs or be cut down to suit smaller cabinets, which is useful when matching varying cabinet heights in a single kitchen. The double cove-cut 1/4 inch profile reads cleanly at eye level, which helps when the panel is used on exposed ends or curved pilasters that sit in the main sightline of a room.
The flexible backing on this tambour panel carries the individual walnut slats as a unit, which allows the face to bend smoothly while keeping the cove pattern aligned, an advantage when wrapping tight inside curves or continuous corner runs. Using standard construction or paneling adhesive over a solid substrate lets installers apply uniform pressure along the 48 inch length, which supports full contact and reduces the chance of hollow spots behind the slats. The unfinished walnut surface is designed to stretch and acclimate for at least 48 hours before finishing, which helps the material settle into its final shape on the substrate before stain and clear coats lock the assembly. Natural variation in color and grain across the premium North American hardwoods adds visual texture, which makes each curved or straight installation read as a purpose-built element instead of a flat panel skin.
The tambour panel is 12 inches wide and 48 inches long, so it covers a moderate area in one piece and can be cut to match specific cabinet or wall dimensions.
The tambour panel is installed using standard construction or paneling adhesive on a solid substrate, which allows bonding over plywood, MDF, or built cabinet structures.
The flexible backing allows the solid wood face to bend, so installers can follow curves and corners while keeping the cove-cut pattern aligned across the surface.
The walnut tambour panel is unfinished, allowing the material to stretch and acclimate for at least 48 hours before finishing so color and sheen can match surrounding work.
The tambour panel is made in the USA from premium North American hardwoods in a walnut configuration, which supports matching other walnut casework in the project.
The 1/4 inch double cove-cut profile creates a repeating groove pattern, giving doors, ends, or appliance garage faces a detailed slatted look across the full panel.
The flexible backing, 12 inch by 48 inch size, and 1/4 inch double cove-cut walnut face make this White River tambour panel style 402 a practical choice for appliance garages, curved cabinet ends, and radius details. Using standard construction or paneling adhesive on a solid substrate keeps installation predictable in the shop or on site. The unfinished, premium North American hardwood construction lets you align grain and finishing with adjacent walnut work. For projects calling for TM402-1248WA tambour, this panel delivers a bendable solid wood surface ready for custom finishing and detailed millwork layouts.