Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River Tambour Panel Style 202 gives you a solid wood solution for curved or straight applications using 3/4 inch bevel slats, so you get a detailed look with substantial slat thickness for visual depth on doors or panels. The 12 inch width and 48 inch length concentrate the pattern into a manageable size, which helps when laying out appliance garages, cabinet ends, or accent panels in tighter runs. Solid wood construction pairs with a flexible backing that easily bends, allowing the panel to follow curves and corners instead of forcing flat stock into awkward shapes. The tambour is unfinished, so the surface accepts your preferred finish system after the material has stretched and acclimated for at least 48 hours, which supports color matching across a project. Made in the USA from premium North American hardwoods in white oak, it blends naturally with common white oak cabinet and millwork programs to keep projects visually consistent.
This solid wood tambour panel installs over any solid substrate using standard construction or paneling adhesive, which lets you bond it to cabinet carcasses, end panels, or radius forms without mechanical fasteners on the face. The flexible backing works with the adhesive bed by conforming to the substrate, so full contact supports a uniform bond along both flat and curved sections. Because the panel is 12 inches wide, you can stage adhesive in controlled runs, keeping open time manageable while you press the tambour into place. The 48 inch length suits many cabinet elevations, limiting joints in vertical runs, which helps keep the pattern visually continuous. Leaving the tambour unfinished until it has stretched and acclimated for at least 48 hours allows the wood to settle on the substrate before you apply finish, supporting even film build and reducing movement after coating.
This White River tambour panel sits in the Decorative Hardware and Moldings and Wood Panels category while also being classified under Appliance Garages and Tambour Doors, so it naturally slots into upper cabinet door concepts and specialty storage openings. The 12 inch by 48 inch dimension aligns well with many appliance garage widths and heights, letting you design rolling fronts within common cabinet modules. Because the flexible backing easily bends, the same panel can carry around corners or flow into curved end cabinets, which keeps the white oak grain and 3/4 inch bevel slat pattern unbroken across transitions. Solid white oak construction from premium North American hardwoods supports use alongside matching white oak face frames, doors, and trims, helping you maintain a unified material story across decorative and functional components. The tambour format also lends itself to accent panels on islands or built-ins, where the repeated bevel slat profile can visually tie back to tambour doors used elsewhere in the room.
The 3/4 inch bevel slat thickness creates a strong profile at each rib, so once the tambour is adhered to a substrate the pattern reads cleanly across curves and flat faces, which helps you repeat the same visual effect on multiple units. Because the panel is supplied as unfinished tambour, waiting at least 48 hours for the material to stretch and acclimate before finishing gives the backing and white oak time to relax on the substrate, which supports consistent alignment of the bevel slats from job to job. Using standard construction or paneling adhesive as specified concentrates installation variables into familiar products and techniques, allowing installers to duplicate successful methods across several openings or projects. The flexible backing that easily bends removes the need to segment or piece short slats around a radius, so each run can be applied as a continuous sheet, reducing layout steps and helping achieve reliable pattern registration along cabinet lines. With the 12 inch width and 48 inch length format, cutting to fit repeated cabinet sizes becomes straightforward, which supports template-based fabrication and reduces layout time on recurring designs.
White River Tambour Panel Style 202 is 12 inches wide by 48 inches long, so it fits many cabinet openings and can be joined or trimmed to match your specific layout.
The Style 202 tambour panel is made from premium North American hardwoods in white oak, helping it visually coordinate with white oak cabinetry and millwork workpieces.
The white oak tambour panel is installed using standard construction or paneling adhesive onto a solid substrate, creating a bonded surface on cabinets, end panels, or curved forms.
This tambour panel uses a flexible backing that easily bends, allowing the solid wood face to wrap curves and corners for continuous grain and pattern around transitions.
The White River tambour panel is unfinished, and the material should stretch and acclimate for at least 48 hours before finishing so the wood settles before coating.
This tambour panel belongs to the Appliance Garages and Tambour Doors class, making it suitable for appliance garage fronts, tambour doors, and decorative curved panel treatments.
Choose White River Tambour Panel Style 202 when you need a 12 inch by 48 inch white oak solution that bends with a flexible backing, adheres using standard construction or paneling adhesive, and finishes on site after a 48 hour acclimation period. The 3/4 inch bevel slats, unfinished surface, and premium North American hardwood construction give you a consistent material base for appliance garages, tambour doors, and curved accent panels where white oak and a defined tambour profile are part of the design intent.