White River Tambour Panel Style 302 is a 1/4 inch square flexible solid wood panel sized at 12 inches wide by 48 inches long, so it gives you a defined modular footprint for appliance garages, door fronts, or decorative wraps. The flexible backing allows the panel to bend, which supports curved applications and tight corner work where flat sheet goods will not conform. Solid North American hardwood construction provides a true wood surface that can be integrated with surrounding millwork. The tambour is supplied unfinished, so it can be finished on site to match existing cabinetry or trim. The product is classified under appliance garages and tambour doors, which aligns it with typical upper cabinet and counter applications. The panel is made in the USA, providing predictable material quality and consistent supply for repeat jobs.
This tambour panel is designed to be attached to a solid substrate using standard construction or paneling adhesive, so installation ties directly into common cabinet or millwork workflows. Using adhesive with a flexible-backed panel allows full contact across the surface, which helps the wood conform to curves without localized stress points. The need for a solid substrate means the tambour becomes a decorative wear surface, rather than a structural element, which streamlines planning for case construction. Because the panel is unfinished, the material can acclimate and then be finished after bonding, helping the installed piece move as a unit. The 48 inch length works with many upper cabinet and appliance garage spans, which reduces cutting and layout time on repetitive runs.
This White River tambour panel is part of the appliance garages and tambour doors product class, which situates it in typical kitchen and shop cabinetry applications. The 12 inch width works well for narrow appliance garages, small door assemblies, or vertical feature strips in larger wall runs. With a length of 48 inches, the panel can cover many standard cabinet openings in one piece, limiting seams in visible areas. The flexible backing allows the 1/4 inch square profile to track smoothly around curved cabinets or corners, which is useful for radius ends or column wraps. Because the panel is made from premium North American hardwoods, it can be integrated into custom millwork where species consistency and visual grain are important design elements.
The solid wood construction combined with a flexible backing gives you a surface that bends while maintaining a continuous hardwood face, which reduces layout complexity compared with building segmented curved faces. Using standard construction or paneling adhesive to attach the tambour to a solid substrate provides full-area support, which helps the installed surface resist telegraphing or unevenness from the base. The unfinished paint grade designation lets you apply stain, paint, or clear topcoats as required, which supports close color alignment with doors, face frames, or existing trim. Natural variations in color and grain across the hardwood slats add depth and texture, which can break up large flat cabinet runs. Being made in the USA from premium North American hardwoods supports repeatability across multiple orders, which is important when the same Style 302 profile, dimension, and visual character must be carried through a full project.
White River Tambour Panel Style 302 measures 12 inches wide by 48 inches long, which fits many cabinet spans and allows single-piece coverage in appliance garage and door applications.
The panel uses a flexible backing that easily bends, so the solid wood face can follow curves and corners where flat panels would not conform without complex joinery.
The tambour panel is made in the USA from premium North American hardwoods, providing a true wood surface suited to custom cabinet and millwork finishing systems.
Installation uses standard construction or paneling adhesive onto a solid substrate, which supports full-surface bonding and helps the flexible panel track smoothly over curves.
The tambour is unfinished paint grade, so it can be finished on site with your preferred system after the material has stretched and acclimated for at least 48 hours.
The 1/4 inch square profile creates tight, regular lines across the panel, generating a consistent rhythm that suits appliance garages, doors, and feature wall details.
The White River Tambour Panel Style 302, TM302-1248PO, combines a 1/4 inch square solid hardwood face with a flexible backing, so it addresses curved and corner cabinet situations while tying into appliance garage and tambour door projects. The 12 inch by 48 inch format works efficiently across many openings, and installation with standard construction or paneling adhesive keeps the workflow straightforward. The unfinished paint grade hardwood surface integrates into custom finishing schedules. For projects needing a flexible, solid wood tambour in a defined 12 by 48 size, this panel aligns with common cabinet and millwork demands.